NS
Consumer Circuits
LM1304/LM1305/LM1307/LM1307E
FM multiplex stereo demodulator
general description
‘The LM1304, LM1305, LM1307 and LM1307E are
designed to derive the left and right channel audio
information from the detected composite stereo
signal, The LM1304 eliminates the need for an
external stereo-channel separation control. The
LM1306 js similar to the LM1304 but permits the
use of an external stereo-channel separation control
for maximum separation. The LM1307 is also
similar to the LM1304 but does not have the audio
mute control, or the stereo/mono switch. The
LM1307E is similar to the LM1307 but has the
option of emitter-follower output drivers for but
fers or high current applications.
features
= Operation over a wide power supply range
Built in stereo-indicator lamp driver ~
100 mA typicat
= Automatic switching between stereo and
monaurat
® Audio mute control
circuit schematics
‘or LM1307EN
Seo Package 22
1304
Order Number LM1304N.01
for LMI1305N.01 or LM1307N.01
‘or LM1307EN.01
‘See Package 24
5.65
SLOELW1/LOELW1/SOELWN1/POELINTLM1304/LM1305/LM1307/LM1307E
absolute maximum ratings
Power Supply Voltage +220
Lamp Driver Current 120 mA
Power Dissipation 625 mw
Derate Above T= +25°C 5.0 mw/°C.
Operating Temperature Range (Ambient) 0°C 10 478°C
Storage Temperature Range ~65°C to +150°C.
‘Output Current (LM1307E) 25 mA
Lead Temperature (Soidering, 10 sec) 300°C
electrical characteristics (voc
12V, Ta = 28°C, 75 us de-emphasis unless otherwise noted)
PARAMETER CONDITIONS: min | typ | max | uNtTs
Input Impedance 2 | 20 Ka
Stereo Channel Separation (Note 1) 35 0B
(ote 3) 30 | 45, 8.
20 8.
(Channel Balance 02) 10] ae
Total Harmonie Distortion (Note 1) os| wo] %
Uttrasonic Frequeney Rejection 30 8
(Note 2) 20 | 25 3B
Inherent SCA Rejection 680 kHz, 67 kHz, 74 kHz 50 8
(Without De Emphasis)
Lamp Indicator Ra = 18002
Min 19 kHz Input Level for Lamp On 16 | 25 | mvims
Max 19kHz Input Level for Lamp oft } 5.0 | 14 mVems
Power Dissipation Without Lamp 150 | 300 mW.
‘Audio Muting (LM11304/5 Only]
Mute On (Pin § Voltage) 06 gs) wf] v
‘Mute Off (Pin § Voltage) 13 | 1] 20] v
Attenuation in Mute Mode 55 38
‘Stereo Monaural Switching Stereo [Pin 4 Voltage! is | a} 20] v
(191130475 Only) ‘Monaural (Pin § Voltage) 06 a] wl v
Note 1: Measurement made with standard multiplex composite signal, L = 1, R = 0 oF L=0, R= 1;
composite signal defined 2 564 mV’ peak to peak (100 mVems as read on Ballantine S10-A voltmeter)
with 220 mVems 19 ke pilot earner
Note 2: Referenced to 1 kHz output signal with signal per Note 1
Note 3: Stereo channel separation is adjusted for maximum separation inthe LM1305 with a resistor
{from Pin 9 10 GND.
(Rg = 1802, All voltages measured with respect to GND)
(Wee = 12V, 2.7 k2 in series w/Pin 8)
Pins [23 4 6 6 7 8 8 to i i
LM1304. 12 23 30 19 19 08 0 46 12 39 97 97 39 19
LM1305 12 23 30 19 19 08 0 12 036 39 97 97 39 19
unger 12 23 30 - — OB 0 - 12 39 97 97 39 10
L1307E 12 23 30 - 8 12 0 97 90 90 97 39 39 19
5.66circuit schematics (con‘t)
307
SLOELW1/LOELW1/S0ELNT/POELNTLM1304/LM1305/LM1307/LM1307E
circuit schematics (con‘t)
3076
typical performance characteristics
CHANNEL SEPARATION et)
TOTAL HARON ISTORTION
‘Channel Separation vs Voc
‘Channel Separation vt
Composite Input Level
Take tena
pierav
* 1 *
* Es
5
” Be ial
» » Ll
‘Total Harmonie Distortion vz
Composite Input Level
maemo
‘COMPOSITE NPUT LEVEL (nna
oo sme
COMPOSITE PUT nen)
Multtiptex Sensitivity vs
TDKHE Gain Adjustment
100
vee RY.
. [ewes
rr ar)
fy 194He GAM AO.USTMENT (0)
568circuit configurations
1LM1904 Typied! Circuit Configuration
1LM1307 Typical Circuit Configuration
5.69
SLOELW1/LOELW1/SOELW1/POELWNTLM1304/LM1305/LM1307/LM1307E
circuit configura’
LM1307E Typical Circuit Configuration
5:70