Sl. Technical Specification (Precision Air conditioner) Compliance
No. (Yes/No) 1 Cooling Unit Type – Split Type wall mounted 2 Cooling Capacity – 3 Tr 3 Airflow -- 2800 CMH or better 4 Sensible Heat Ratio > 0.9 5 The Unit should have robust Designed to run 24x7 6 Auto Startup on Power Failure. 7 Refrigerant – R407C / R410A 8 Microprocessor based Controller 9 Unit to Unit Communication 10 Machine should have two parts; Indoor section & outdoor section 11 The Indoor unit 11.1 Industrial grade Powder coated metallic body construction for high durability even in adverse conditions. 11.2 Large surface area hydrophilic coated cooling coil made of copper with aluminium fins 11.3 EC Fan-High efficiency step-less speed modulation fan with EC motor 11.4 Expansion Valve for control on evaporating Temperature and handling high refrigerant flow rate 11.5 Corded Remote 11.6 G4 rating filters as per industrial standards 11.7 Suction and Discharge piping 11.8 Internal power and Control wiring, 11.10 HP/LP Cut-outs, Power and Control contactors, RS485 card for monitoring, and Other Electrical & safety accessories. 12 Outdoor cabinet 12.1 Industrial grade aluminium body construction designed to withstand horrid outdoor conditions 12.2 Scroll Compressor and Anti Corrosive Condenser coil. Industrial grade aluminium body construction designed to withstand horrid outdoor conditions 12.3 Axial Condenser fans made of aluminium or equivalent 13 Machine must be capable of functioning up to 30 metre Copper piping between Indoor & outdoor unit. 14 Team Mode feature for unit control, synchronising the Multiple No. of units to work as single system for all above units. 15 Auto Fault Failure changeover 16 Cascading Effect