Professional Documents
Culture Documents
tbapp
Page - 1
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Participant ID
Participant Name
Q.1 The orientation of cutting edge in cutting line for an ASA system of cutting is termed as
________.
Ans 1. cutting edge nose radius
Question ID : 54062614336
Status : Answered
Chosen Option : 2
2. carbon
3. iron
4. magnesium
Question ID : 54062614320
Status : Answered
Chosen Option : 1
Q.3 A/An _______ is a joint in which the rivets are arranged in such a way that rivets in different
rows are located opposite to each other.
Ans 1. zig zag joint
2. lap joint
3. elevated joint
Question ID : 54062614418
Status : Answered
Chosen Option : 1
Page - 2
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question ID : 54062614364
Status : Answered
Chosen Option : 4
2. sub-cooling compression
3. wet compression
4. dry compression
Question ID : 54062614391
Status : Answered
Chosen Option : 3
Q.6 The friction factor _______when the flow becomes fully turbulent.
Ans 1. reaches maximum value
3. becomes zero
4. becomes negative
Question ID : 54062614363
Status : Answered
Chosen Option : 1
Q.7 The Nusselt number in natural convection heat transfer is a function of _______.
Ans 1. Re and Pr
2. Re and Gr
3. Gr and Pr
4. Gr and Bi
Question ID : 54062614377
Status : Answered
Chosen Option : 3
Page - 3
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. Anticipation inventory
Question ID : 54062614348
Status : Answered
Chosen Option : 2
Q.9 Which of the following is NOT a preferred material for the making of patterns?
Ans 1. Metal
2. Plastic
3. Wood
4. Ceramic
Question ID : 54062614298
Status : Answered
Chosen Option : 4
Q.10 The time between placing the order and receipt of material is termed as _______.
Ans 1. lead time
2. safety time
3. demand time
4. time horizon
Question ID : 54062614349
Status : Answered
Chosen Option : 1
Q.11 _______ type of compression shall always be preferred when gas has to be stored.
Ans 1. Adiabatic
2. Constant volume
3. Isothermal
4. Polytropic
Question ID : 54062614386
Status : Answered
Chosen Option : 3
Page - 4
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. manganese
3. copper
4. aluminium
Question ID : 54062614312
Status : Answered
Chosen Option : 4
Q.13 In a hole-shaft assembly, when the largest permissible diameter of the shaft is smaller than
the smallest diameter of the hole, _______ can be achieved.
Ans 1. interference fit
2. clearance fit
3. transition fit
4. combined fit
Question ID : 54062614324
Status : Answered
Chosen Option : 2
2. locked-in
3. surface
4. top in
Question ID : 54062614414
Status : Answered
Chosen Option : 1
2. constant
3. variable
4. negative
Question ID : 54062614329
Status : Answered
Chosen Option : 1
Page - 5
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question ID : 54062614325
Status : Answered
Chosen Option : 3
Q.17 Fin ________ is termed as the ratio of the heat transfer rate of a fin to heat transfer rate
without fin.
Ans 1. effectiveness
2. conductance
3. efficiency
4. resistance
Question ID : 54062614369
Status : Answered
Chosen Option : 1
Q.18 The rolling process is carried out on rolling machines also termed as ________.
Ans 1. rolling jackets
2. rolling structures
3. rolling platforms
4. rolling mills
Question ID : 54062614292
Status : Answered
Chosen Option : 4
Q.19 _______ fluids are used in a manometer to keep their size manageable, in case large
pressure differences are anticipated.
Ans 1. Moderate
2. Light
3. Heavy
4. Extremely light
Question ID : 54062614360
Status : Answered
Chosen Option : 3
Page - 6
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question ID : 54062614313
Status : Answered
Chosen Option : 3
Q.21 Euler's theory assumes that failure within a column is solely due to _______.
Ans 1. torsion
2. buckling
3. sagging
4. bending
Question ID : 54062614407
Status : Answered
Chosen Option : 2
Q.22 According to the law of conservation of momentum, the total momentum of two bodies
________ after the collision.
Ans 1. increases
2. decreases
3. becomes zero
4. remains constant
Question ID : 54062614399
Status : Answered
Chosen Option : 4
Q.23 _______ affects the position of the cutting edge with respect to the workpiece and alters
dimensional accuracy of machined parts.
Ans 1. Thermal wear
2. Flank wear
3. Notch wear
4. Crater wear
Question ID : 54062614343
Status : Answered
Chosen Option : 4
Page - 7
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. viscous
3. incompressible
4. compressible
Question ID : 54062614359
Status : Answered
Chosen Option : 3
Question ID : 54062614379
Status : Answered
Chosen Option : 2
Q.26 Mechanical and fluid friction are some of the causes of ________.
Ans 1. irreversibility
2. decrease in efficiency
3. Reversibility
4. thermal degradation
Question ID : 54062614384
Status : Answered
Chosen Option : 4
Q.27 On a highway, when a truck makes a left turn, the gyroscopic torque:
Ans 1. behaves abruptly
Question ID : 54062614436
Status : Answered
Chosen Option : 2
Page - 8
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.28 Distortion energy theory is also known as_______ after the scientist who proposed it.
Ans 1. Von Mises theory
2. Haigh’s theory
4. Tresca’s theory
Question ID : 54062614411
Status : Answered
Chosen Option : 1
Q.29 A joint between two components lying approximately in the same plane is called _______.
Ans 1. corner joint
2. T-joint
3. lap joint
4. butt joint
Question ID : 54062614415
Status : Answered
Chosen Option : 4
Q.30 _______ is an organic binder used in core making during the casting process.
Ans 1. Bentonite
2. Kaolinite
3. Fire clay
4. Cereal binder
Question ID : 54062614296
Status : Answered
Chosen Option : 4
Question ID : 54062614321
Status : Answered
Chosen Option : 3
Page - 9
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. reverted
3. compound
4. epicyclic
Question ID : 54062614434
Status : Answered
Chosen Option : 3
Q.33 Which pressure measurement device has its construction wherein, a hollow metal tube is
bent like a hook and the end is closed, connected to dial indicator?
Ans 1. Bourdon tube
2. Manometer
3. Barometer
4. Pirani gauge
Question ID : 54062614361
Status : Answered
Chosen Option : 1
2. Early
3. Essential
4. Easy
Question ID : 54062614347
Status : Answered
Chosen Option : 1
2. Shaping
3. Reaming
4. Broaching
Question ID : 54062614334
Status : Answered
Chosen Option : 2
Page - 10
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. Rolling
3. Scrubbing
Question ID : 54062614430
Status : Answered
Chosen Option : 4
Question ID : 54062614387
Status : Answered
Chosen Option : 2
Q.38 _______ is a replica of the final product and used to prepare mould cavity.
Ans 1. Sprue
2. Pattern
3. Core
4. Riser
Question ID : 54062614289
Status : Answered
Chosen Option : 2
Q.39 Which type of wear occurs locally in an area where the main cutting edge contacts
workpiece?
Ans 1. Thermal wear
2. Notch wear
3. Crater wear
4. Flank wear
Question ID : 54062614342
Status : Answered
Chosen Option : 4
Page - 11
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.40 ________ is a type of geometric tolerance applied to limit the direction of a feature in relation
to other features in an assembly.
Ans 1. Unilateral tolerance
2. Form tolerance
3. Positional tolerance
4. Orientation tolerance
Question ID : 54062614326
Status : Answered
Chosen Option : 1
Q.41 The _______ path within a network diagram is called critical path.
Ans 1. longest
2. shortest
3. easiest
4. curved
Question ID : 54062614352
Status : Answered
Chosen Option : 1
Question ID : 54062614404
Status : Answered
Chosen Option : 4
2. First
3. Third
4. Zeroth
Question ID : 54062614382
Status : Answered
Chosen Option : 1
Page - 12
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. Maximum fluctuation
3. Fluctuation curve
4. Fluctuation constant
Question ID : 54062614432
Status : Answered
Chosen Option : 1
Q.45 ________ defect can never occur in a gas tungsten arc welding process.
Ans 1. Crack
2. Porosity
3. Tungsten inclusion
4. Slag inclusion
Question ID : 54062614293
Status : Answered
Chosen Option : 3
2. steam turbines
3. steam boilers
Question ID : 54062614389
Status : Answered
Chosen Option : 1
2. parallel
3. colinear
4. non-colinear
Question ID : 54062614403
Status : Answered
Chosen Option : 3
Page - 13
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.48 Laser beam machining is classified as _______ type of non-traditional machining process.
Ans 1. electrochemical
2. chemical
3. mechanical
4. thermal
Question ID : 54062614341
Status : Answered
Chosen Option : 4
2. transition fit
3. clearance fit
4. interference fit
Question ID : 54062614327
Status : Answered
Chosen Option : 4
Q.50 ________ system for cutting is a tool-in-use type system for machining with a single-point
cutting tool.
Ans 1. ASA
2. Orthogonal
3. Coinciding
4. Parallel
Question ID : 54062614338
Status : Answered
Chosen Option : 1
2. lower pair
3. higher pair
4. self-closed pair
Question ID : 54062614431
Status : Answered
Chosen Option : 4
Page - 14
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. Force
3. Speed
4. Acceleration
Question ID : 54062614396
Status : Answered
Chosen Option : 3
2. Torsional
3. Tensile
4. Thermal
Question ID : 54062614405
Status : Answered
Chosen Option : 2
Q.54 The purpose of applying flux in soldering and brazing is primarily to ________.
Ans 1. speed the process
3. dissolve oxides
4. clear defects
Question ID : 54062614307
Status : Answered
Chosen Option : 3
Q.55 When total supply is equal to the total demand for a transportation problem, it is termed as
a/an _______ transportation problem.
Ans 1. equal
2. balanced
3. similar
4. neutral
Question ID : 54062614355
Status : Answered
Chosen Option : 2
Page - 15
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.56 _______ is elastic instability which results in sudden large lateral deflection.
Ans 1. Sagging
2. Fatigue
3. Buckling
4. Failure
Question ID : 54062614420
Status : Answered
Chosen Option : 3
Q.57 Non-traditional machining processes are introduced to overcome the limits of _______
properties of the workpiece to be machined.
Ans 1. chemical
2. atomic
3. electrical
4. mechanical
Question ID : 54062614332
Status : Answered
Chosen Option : 4
Q.58 The ratio of actual useful work to the maximum useful work is called ________.
Ans 1. Enthalpy
2. Entropy
3. Effectiveness
4. Availability
Question ID : 54062614385
Status : Answered
Chosen Option : 4
Q.59 Which of the following is a non-traditional machining process that uses mechanical action
for removing material?
Ans 1. Ultrasonic machining
Question ID : 54062614331
Status : Answered
Chosen Option : 1
Page - 16
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.60 ________ are used in cutting operations for breaking of continuous chips formed during
machining.
Ans 1. Band saws
2. Chip breakers
3. Chip smashers
4. Hacksaws
Question ID : 54062614333
Status : Answered
Chosen Option : 2
Q.61 On reduction in suction pressure, the refrigerating effect and COP _______.
Ans 1. increase
2. decrease
3. remain constant
4. become zero
Question ID : 54062614390
Status : Answered
Chosen Option : 2
Q.62 For a machining system, the cutting speed is 20 m/min, Taylors exponent is 1 and the
Taylors coefficient is 2000. The tool life in seconds is _______.
Ans 1. 6000
2. 1980
3. 100
4. 2020
Question ID : 54062614340
Status : Answered
Chosen Option : 1
2. PSI
3. Torr
4. Pascal
Question ID : 54062614358
Status : Answered
Chosen Option : 3
Page - 17
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. Leader stage
3. Breakdown stage
4. Back-up stage
Question ID : 54062614309
Status : Answered
Chosen Option : 1
Question ID : 54062614303
Status : Answered
Chosen Option : 3
Q.66 The rate at which energy is radiated by a black body at an absolute temperature is given by
_______.
Ans 1. Grashof law
2. Prandtl law
3. Nusselt law
4. Stefan-Boltzmann law
Question ID : 54062614367
Status : Answered
Chosen Option : 4
2. 1.2
3. 0.8
4. 1
Question ID : 54062614400
Status : Answered
Chosen Option : 1
Page - 18
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. 1
3. 4
4. 2
Question ID : 54062614408
Status : Answered
Chosen Option : 4
Question ID : 54062614314
Status : Answered
Chosen Option : 2
Q.70 The work output from the turbine in a Rankine cycle is given by the change of
_______between inlet and outlet.
Ans 1. Temperature
2. Entropy
3. Internal energy
4. Enthalpy
Question ID : 54062614393
Status : Answered
Chosen Option : 4
2. impact strength
3. fatigue strength
4. creep strength
Question ID : 54062614315
Status : Answered
Chosen Option : 3
Page - 19
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.72 The first product obtained after the breakdown of the ingots is called _______.
Ans 1. foil
2. bloom
3. slab
4. billet
Question ID : 54062614290
Status : Answered
Chosen Option : 4
Q.73 _______ is defined as the ratio of the actual damping coefficient to critical damping
coefficient.
Ans 1. Damping factor
2. Damping value
3. Damping constant
4. Damping series
Question ID : 54062614425
Status : Answered
Chosen Option : 1
Question ID : 54062614308
Status : Answered
Chosen Option : 1
Question ID : 54062614435
Status : Answered
Chosen Option : 1
Page - 20
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question ID : 54062614406
Status : Answered
Chosen Option : 3
2. constant
3. zero
4. Maximum
Question ID : 54062614380
Status : Answered
Chosen Option : 3
2. tensile stress
3. torsional stress
4. compressive stress
Question ID : 54062614409
Status : Answered
Chosen Option : 1
Q.79 When radiant energy is incident upon the surface of the body, which of the following
phenomena does NOT occur?
Ans 1. Conversion
2. Reflection
3. Absorption
4. Transmission
Question ID : 54062614368
Status : Answered
Chosen Option : 1
Page - 21
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. Investment casting
3. Vacuum casting
4. Shell moulding
Question ID : 54062614297
Status : Answered
Chosen Option : 1
2. not applied
3. bonded to electrode
Question ID : 54062614294
Status : Answered
Chosen Option : 1
2. between 0 and 1
3. 1
4. 0
Question ID : 54062614428
Status : Answered
Chosen Option : 4
Q.83 Which of the following is NOT a phenomenon that occurs in welding arc?
Ans 1. Thermionic emission of electrons
2. Emission of UV rays
Question ID : 54062614311
Status : Answered
Chosen Option : 1
Page - 22
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. Loam
3. Weak
4. Silica
Question ID : 54062614295
Status : Answered
Chosen Option : 2
Q.85 Fixed quantity systems are also termed as _______ systems of inventory control.
Ans 1. q
2. p
3. qv
4. pq
Question ID : 54062614350
Status : Answered
Chosen Option : 1
Q.86 The distance between the centre of one rivet to the centre of an adjacent rivet located in the
adjacent row is called _______.
Ans 1. back pitch
2. row pitch
3. transverse pitch
4. diagonal pitch
Question ID : 54062614417
Status : Answered
Chosen Option : 1
Q.87 A combination of kinematic pairs, joined in such a way that the relative motion between the
links is completely constrained, is called:
Ans 1. mechanism
2. structure
3. kinematic chain
4. inversion
Question ID : 54062614433
Status : Answered
Chosen Option : 3
Page - 23
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question ID : 54062614383
Status : Answered
Chosen Option : 4
2. capillary action
3. avalanche motion
4. surface tension
Question ID : 54062614302
Status : Answered
Chosen Option : 2
Q.90 For long column, which of the following relations holds true?
Ans 1. Crushing load is negligible as compared to buckling load
Question ID : 54062614410
Status : Answered
Chosen Option : 3
Q.91 The graphical method is best suited for solving linear programming problems with ________
variables.
Ans 1. 5
2. 3
3. 4
4. 2
Question ID : 54062614354
Status : Answered
Chosen Option : 4
Page - 24
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.92 At room temperature, the ratio of radiation heat transfer co-efficient to surface emissivity is
about:
Ans 1. 2
2. 6
3. 3
4. 1.5
Question ID : 54062614375
Status : Answered
Chosen Option : 1
2. Foil
3. Slab
4. Plate
Question ID : 54062614291
Status : Answered
Chosen Option : 3
Q.94 Which of the following is NOT a factor responsible for continuous chips?
Ans 1. Small rake angles
Question ID : 54062614344
Status : Answered
Chosen Option : 1
Q.95 Which of the following components feed(s) molten metal to casting set-up?
Ans 1. Ladle
2. Dowel pins
3. Riser
4. Core
Question ID : 54062614288
Status : Answered
Chosen Option : 3
Page - 25
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. tin
3. zinc
4. copper
Question ID : 54062614319
Status : Answered
Chosen Option : 3
Q.97 Propulsive coefficient _______ if the difference between jet and airplane velocity increases.
Ans 1. becomes zero
2. decreases
4. increases
Question ID : 54062614392
Status : Answered
Chosen Option : 4
Q.98 ________ mode of heat transfer does NOT require any medium to transfer.
Ans 1. Radiation
2. Conduction
3. Substantiation
4. Convection
Question ID : 54062614374
Status : Answered
Chosen Option : 1
2. diamond cone
3. diamond pyramid
4. steel ball
Question ID : 54062614317
Status : Answered
Chosen Option : 2
Page - 26
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.100 For pipes, the radius of the pipe is taken higher than the critical radius, so that any
insulation added will _______.
Ans 1. keep loss unaltered
Question ID : 54062614372
Status : Answered
Chosen Option : 2
Q.101
Ans 1.
2.
3.
4.
Question ID : 54062614328
Status : Answered
Chosen Option : 4
3. Propeller turbine
Question ID : 54062614388
Status : Answered
Chosen Option : 2
Q.103 For a stress-strain diagram for ductile material, the work hardening starts after the _______.
Ans 1. elastic limit
3. limit of proportionality
Question ID : 54062614316
Status : Answered
Chosen Option : 4
Page - 27
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.104 As defined by Prandtl, in convective heat transfer, a thin layer next to the wall where shear
stress is confined is called _______.
Ans 1. radiative layer
2. diffusion layer
3. boundary layer
4. compound layer
Question ID : 54062614376
Status : Answered
Chosen Option : 3
Q.105 The aim of the tempering heat treatment is to reduce _______ while substantially reducing
_______.
Ans 1. fatigue strength; ductility
2. hardness; brittleness
3. hardness; ductility
Question ID : 54062614322
Status : Answered
Chosen Option : 2
3. Electrochemical machining
Question ID : 54062614330
Status : Answered
Chosen Option : 1
Question ID : 54062614301
Status : Answered
Chosen Option : 4
Page - 28
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.108 _______ system for cutting is a tool-in-hand type system for sharpening and grinding with a
single-point cutting tool.
Ans 1. ASA
2. Parallel
3. Orthogonal
4. Coinciding
Question ID : 54062614337
Status : Answered
Chosen Option : 1
2. imperfect
3. deficient
4. perfect
Question ID : 54062614398
Status : Answered
Chosen Option : 4
Q.110 ________ allowance is given to compensate the structural changes in the cavity occurring
due to removal of pattern in the casting process.
Ans 1. Distortion
2. Rapping
3. Machining
4. Shrinkage
Question ID : 54062614299
Status : Answered
Chosen Option : 2
2. Warm
3. Cold
4. Cryogenic
Question ID : 54062614300
Status : Answered
Chosen Option : 2
Page - 29
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.112 Which of the following is NOT true about the tool material used in cutting and machining?
Ans 1. It shall possess a high coefficient of friction.
Question ID : 54062614339
Status : Answered
Chosen Option : 3
Q.113 ________ rake angles are generally used for machining of ductile and tough materials.
Ans 1. Zero
2. Negative
3. Positive
4. Exponential
Question ID : 54062614335
Status : Answered
Chosen Option : 3
Q.114 The compressor work and turbine work for a jet propulsion unit is _______.
Ans 1. zero
2. constant
3. Different
4. Equal
Question ID : 54062614395
Status : Answered
Chosen Option : 4
Q.115 _______ stresses are impinged on the shaft during transverse vibrations.
Ans 1. Bending
2. Radial
3. Torsional
4. Tensile
Question ID : 54062614424
Status : Answered
Chosen Option : 4
Page - 30
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
3. unity
Question ID : 54062614371
Status : Answered
Chosen Option : 4
Question ID : 54062614306
Status : Answered
Chosen Option : 4
Q.118 A mechanism converts into structure when the number of degrees of freedom is equal
to______.
Ans 1. 0
2. 1
3. –1
4. 2
Question ID : 54062614427
Status : Answered
Chosen Option : 1
2. 273°C
3. – 273.15°C
4. 237°C
Question ID : 54062614378
Status : Answered
Chosen Option : 3
Page - 31
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. quality management
3. machining control
4. materials management
Question ID : 54062614346
Status : Answered
Chosen Option : 4
Q.121 As per one of the assumptions of linear programming problem in operations research,
objective function and constraints are assumed to be _______.
Ans 1. sinusoidal
2. exponential
3. linear
4. circular
Question ID : 54062614356
Status : Answered
Chosen Option : 3
Q.122 Forces acting on a solid submerged body in a fluid and on a fluid body of the same shape at
the same depth are always _______.
Ans 1. negative
2. identical
3. zero
4. different
Question ID : 54062614365
Status : Answered
Chosen Option : 4
Q.123 Fixed period systems are also termed as _______ systems of inventory control.
Ans 1. q
2. pq
3. qv
4. p
Question ID : 54062614351
Status : Answered
Chosen Option : 1
Page - 32
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. Grey
3. White
4. Malleable
Question ID : 54062614318
Status : Answered
Chosen Option : 2
Q.125 A force which is gradually applied and does NOT change in magnitude and direction with
respect to time is called _______.
Ans 1. dynamic load
2. pressing load
3. static load
4. variable load
Question ID : 54062614413
Status : Answered
Chosen Option : 3
Q.126 When number of forces act simultaneously on a particle, then the resultant of these forces
will have the same effect as produced by the all the forces. This is known as the principle of
_______.
Ans 1. physical independence of forces
2. resolution of forces
3. weight of forces
4. transmissibility of forces
Question ID : 54062614402
Status : Answered
Chosen Option : 2
Q.127 A cotter joint is used to connect two co-axial rods, subjected to _______ tensile or
compressive loads.
Ans 1. radial
2. tangential
3. axial
4. perpendicular
Question ID : 54062614421
Status : Answered
Chosen Option : 3
Page - 33
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. positive
3. zero
4. same
Question ID : 54062614381
Status : Answered
Chosen Option : 4
2. flow energy
3. continuum energy
4. momentum
Question ID : 54062614357
Status : Answered
Chosen Option : 1
Q.130 In the _______ extrusion process, the material remains stationary and the die moves.
Ans 1. direct
2. hooker
3. indirect
4. impact
Question ID : 54062614305
Status : Answered
Chosen Option : 3
Q.131 ________ in a weld is provided to compensate for the flaws in the weld.
Ans 1. Backing strip
2. Reinforcement
3. J-groove
4. V-groove
Question ID : 54062614416
Status : Answered
Chosen Option : 1
Page - 34
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.132 A good steam power plant having a Rankine cycle may have efficiency in the range of
______.
Ans 1. 35 - 45 percent
2. 70 - 80 percent
3. 5 - 20 percent
4. 90 - 95 percent
Question ID : 54062614394
Status : Answered
Chosen Option : 1
Q.133 Which of the following is an analytical method for finding out forces in a frame?
Ans 1. Method of pins
2. Method of frames
3. Method of joints
4. Method of hinges
Question ID : 54062614397
Status : Answered
Chosen Option : 3
Question ID : 54062614437
Status : Answered
Chosen Option : 4
Q.135 The formula to calculate mass moment of inertia (I) of the circular rim is:
Ans 1.
2.
3.
4.
Question ID : 54062614423
Status : Answered
Chosen Option : 4
Page - 35
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.136
Ans
1.
2.
3.
4.
Question ID : 54062614412
Status : Answered
Chosen Option : 4
2. Triangular duct
3. Circular pipes
4. Rectangular duct
Question ID : 54062614362
Status : Answered
Chosen Option : 3
Q.138 Loss of kinetic energy due to the direct impact of two bodies depends on mass of those two
bodies and:
Ans 1. difference between initial and final velocities
Question ID : 54062614401
Status : Answered
Chosen Option : 1
3. maximum strain
Question ID : 54062614419
Status : Answered
Chosen Option : 3
Page - 36
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.140 In ________, the tolerance zones of the hole and shaft always overlap.
Ans 1. clearance fit
2. interference fit
3. combined fit
4. transition fit
Question ID : 54062614323
Status : Answered
Chosen Option : 2
2. >1
3. <1
4. =1
Question ID : 54062614426
Status : Answered
Chosen Option : 2
2.
3.
4.
Question ID : 54062614429
Status : Answered
Chosen Option : 2
2. inclined at 30°
3. parallel
4. perpendicular
Question ID : 54062614370
Status : Answered
Chosen Option : 3
Page - 37
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.144 ________ is a process involving mass movement of fluids during heat transfer.
Ans 1. Conduction
2. Transition
3. Convection
4. Radiation
Question ID : 54062614366
Status : Answered
Chosen Option : 3
Q.145 When elastic vibrates without external forces owing to inherent forces, it is called _______
vibrations.
Ans 1. forced
2. internal
3. free
4. external
Question ID : 54062614422
Status : Answered
Chosen Option : 3
Q.146 Which of the following is NOT a method of solving the transportation problem?
Ans 1. Vogel's approximation method
3. Northwest rule
Question ID : 54062614353
Status : Answered
Chosen Option : 4
Q.147 The fin effectiveness can be enhanced by selecting ________ value of heat transfer co-
efficient.
Ans 1. low
2. zero
3. high
4. positive
Question ID : 54062614373
Status : Answered
Chosen Option : 1
Page - 38
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.148 In order to stop the debris from going into the main casting cavity ________ is used.
Ans 1. skim bob
2. down gate
3. sprue
4. pouring basin
Question ID : 54062614310
Status : Answered
Chosen Option : 1
Question ID : 54062614345
Status : Answered
Chosen Option : 4
2. eight
3. two
4. six
Question ID : 54062614304
Status : Answered
Chosen Option : 4
Question ID : 54062614439
Status : Answered
Chosen Option : 1
Page - 39
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. असार्थक
3. अनर्थक
4. निरर्थक
Question ID : 54062614442
Status : Answered
Chosen Option : 4
2. कमल
3. राजीव
4. अश्म
Question ID : 54062614452
Status : Answered
Chosen Option : 4
2. दल
3. पंखुड़ी
4. पत्र
Question ID : 54062614440
Status : Answered
Chosen Option : 3
Q.5 'असंगत वस्तुओं के लिए मेल बिठाना' अर्थ के लिए उपयुक्त लोकोक्ति है:
Ans 1. कहीं का ईंट कहीं का रोड़ा, भानुमती ने कु नबा जोड़ा
Question ID : 54062614451
Status : Answered
Chosen Option : 1
Page - 40
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. नीर
3. पावक
4. वायु
Question ID : 54062614448
Status : Answered
Chosen Option : 4
Question ID : 54062614449
Status : Answered
Chosen Option : 4
2. परीक्षा
3. थल
4. छत्र
Question ID : 54062614444
Status : Answered
Chosen Option : 4
Q.9 'सुख से रहना' अर्थ के लिए निम्नलिखित में से उपयुक्त मुहावरा है:
Ans 1. चैन की बंसी बजाना
2. घी के दीए जलाना
Question ID : 54062614443
Status : Answered
Chosen Option : 4
Page - 41
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. इनकार
3. अपकार
4. अपकार्य
Question ID : 54062614446
Status : Answered
Chosen Option : 3
Q.11 निम्नलिखित में से विलोम शब्दों का कौन सा युग्म सही नहीं है:
Ans 1. कु टिल-सरल
2. उच्च-निम्न
3. क्रोध-क्षमा
4. प्रकृ त-सुकृ त
Question ID : 54062614450
Status : Answered
Chosen Option : 4
2. सहज
3. सामान्य
4. संपत्ति
Question ID : 54062614454
Status : Answered
Chosen Option : 2
Question ID : 54062614447
Status : Answered
Chosen Option : 4
Page - 42
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Question ID : 54062614445
Status : Answered
Chosen Option : 1
Question ID : 54062614453
Status : Answered
Chosen Option : 2
2. अक्षि - इच्छा
3. अश्रु - आँसू
4. इक्षु - ईख
Question ID : 54062614438
Status : Answered
Chosen Option : 2
2. नष्ट करना
Question ID : 54062614441
Status : Answered
Chosen Option : 4
Page - 43
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.18 महेंद्र सूरी निम्न में से किस सम्राट के दरबार में खगोलशास्त्री थे?
Ans 1. घियाथ अल-दीन तुगलक
2. गयासुद्दीन तुगलक
3. मुहम्मद-बिन-तुगलक
Question ID : 54062614458
Status : Answered
Chosen Option : 4
Q.19 भारत और पाकिस्तान, इन दोनों देशों से होकर कु ल कितनी नदियाँ बहती हैं?
Ans 1. 5
2. 4
3. 7
4. 6
Question ID : 54062614460
Status : Answered
Chosen Option : 4
Q.20 Who among the following is called the Father of the Green Revolution in India?
Ans 1. Gurdev Khush
2. Verghese Kurien
3. MS Swaminathan
4. Norman Borlaug
Question ID : 54062614470
Status : Answered
Chosen Option : 3
Q.21 निम्नलिखित में से किस वर्ष में महात्मा गांधी और भारतीय राष्ट्रीय कांग्रेस के नेतृत्व में असहयोग आंदोलन
चलाया गया था?
Ans 1. सितंबर 1923 से फरवरी 1928
Question ID : 54062614456
Status : Answered
Chosen Option : 3
Page - 44
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.22 सिंधु घाटी सभ्यता के किस स्थल से प्रसिद्ध पुजारी राजा की मूर्ति मिली है?
Ans 1. मोहें-जो-दडो
2. हड़प्पा
3. चान्हू-दारो
4. लोथल
Question ID : 54062614455
Status : Not Answered
Chosen Option : --
Q.23 भारतीय पेंशन निधि विनियामक और विकास प्राधिकरण (PFRDA) की स्थापना कब की गई थी?
Ans 1. 2000
2. 2005
3. 2003
4. 2001
Question ID : 54062614462
Status : Answered
Chosen Option : 2
2. गृह मंत्री
3. वित्त मंत्री
4. प्रधान मंत्री
Question ID : 54062614468
Status : Answered
Chosen Option : 4
Q.25 संविधान का 103 वाँ संशोधन निम्न में से किससे संबंध रखता है?
Ans 1. अन्य पिछड़ा वर्ग के लिए 27% आरक्षण
3. वस्तु और सेवा कर
Question ID : 54062614465
Status : Answered
Chosen Option : 2
Page - 45
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
2. राणा सांगा
3. रत्नसिंह
4. राणा कुं भा
Question ID : 54062614457
Status : Answered
Chosen Option : 4
Q.27 ___________ वह साधन है, जिसके द्वारा सरकार देश की अर्थव्यवस्था की निगरानी करने और उसे प्रभावित
करने के लिए अपने व्यय के स्तरों और कर की दरों को समायोजित करती है।
Ans 1. मौद्रिक नीति
3. राजकोषीय नीति
4. व्यापार नीति
Question ID : 54062614467
Status : Answered
Chosen Option : 2
Q.28 राजभाषा अधिनियम, 1963 की धारा 8(1) के प्रावधानों के तहत राजभाषा के नियम कब बनाए गए थे?
Ans 1. 1975
2. 1977
3. 1978
4. 1976
Question ID : 54062614466
Status : Not Answered
Chosen Option : --
Q.29 भारतीय बीमा विनियामक और विकास प्राधिकरण (IRDA) का मुख्यालय कहाँ स्थित है?
Ans 1. हैदराबाद
2. मुंबई
3. बेंगलुरु
4. नई दिल्ली
Question ID : 54062614461
Status : Answered
Chosen Option : 4
Page - 46
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.30 भारतीय राष्ट्रीय कृ षि और ग्रामीण विकास बैंक (नाबार्ड) का मुख्यालय कहाँ स्थित है?
Ans 1. चेन्नई
2. नई दिल्ली
3. मुंबई
4. कोलकाता
Question ID : 54062614463
Status : Answered
Chosen Option : 3
Q.31 ___________ वह दर है, जिस पर भारतीय रिज़र्व बैंक वाणिज्यिक बैंकों को पैसा उधार देता है।
Ans 1. उधार (लेंडिंग) ब्याज दर
3. रेपो दर
4. रिवर्स रेपो दर
Question ID : 54062614469
Status : Answered
Chosen Option : 3
Q.32 निम्न में से किस राज्य की विधान सभा में सबसे कम सीटें हैं?
Ans 1. मिजोरम
2. पुडुचेरी
3. सिक्किम
4. नागालैंड
Question ID : 54062614464
Status : Answered
Chosen Option : 3
2. Governor
Question ID : 54062614459
Status : Answered
Chosen Option : 2
Page - 47
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.34 In a certain code language, APPROACH is written as CHOAPRAP. How will COMPUTER be
written as in the same language?
Ans 1. REUTMPCO
2. RETUMPCO
3. ERUTMPCO
4. ERTUMPCO
Question ID : 54062614474
Status : Answered
Chosen Option : 4
Q.35 Select the word that CANNOT be formed using the letters of the given word only as many
times as the letters have been used in the word.
INSTITUTION
Ans 1. NOUNS
2. UNIONS
3. STATUS
4. TUITION
Question ID : 54062614482
Status : Answered
Chosen Option : 3
Q.36 In a certain code language, ASM1TA is written as EWQ5XE. How will MUKH1 be written as
in the same language?
Ans 1. QYOLS
2. QYOL5
3. NYQLS
4. NYOLS
Question ID : 54062614478
Status : Answered
Chosen Option : 2
2. 38
3. 43
4. 32
Question ID : 54062614484
Status : Answered
Chosen Option : 3
Page - 48
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.38 Four words have been given, out of which three are alike in some manner and one is
different. Select the one that is different.
Ans 1. Road
2. Brake
3. Clutch
4. Steering
Question ID : 54062614475
Status : Answered
Chosen Option : 1
Q.39 ‘TEACH’ is related to ‘ZKGIN’ in the same way as ‘WASTE’ is related to ‘______’.
Ans 1. CGXZK
2. DHYZK
3. DGYZK
4. CGYZK
Question ID : 54062614473
Status : Answered
Chosen Option : 4
Q.40 Four number-pairs have been given, out of which three are alike in some manner and one is
different. Select the one that is different.
Ans 1. 27 – 36
2. 33 – 43
3. 52 – 61
4. 44 – 53
Question ID : 54062614476
Status : Answered
Chosen Option : 2
Q.41 Select the option that is related to the third number in the same way as the second number
is related to the first number.
3 : 45 : : 5 : ?
Ans 1. 75
2. 90
3. 47
4. 50
Question ID : 54062614472
Status : Answered
Chosen Option : 1
Page - 49
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.42 चार शब्द दिए गए हैं, जिनमें से तीन किसी प्रकार से समान हैं और एक भिन्न है। विषम को चुनें।
Ans 1. उपन्यासकार
2. कवि
3. लेखक
4. कहानी
Question ID : 54062614483
Status : Answered
Chosen Option : 4
2. 10
3. 9
4. 8
Question ID : 54062614485
Status : Answered
Chosen Option : 1
Q.44
Ans 1.
2.
3.
4.
Question ID : 54062614479
Status : Answered
Chosen Option : 2
Q.45 In a certain code language, STAR is written as 1819017 and PLANET is written as
1511013419. How will MOON be written as in that language?
Ans 1. 12131314
2. 12131414
3. 12141413
4. 13121414
Question ID : 54062614471
Status : Answered
Chosen Option : 3
Page - 50
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.46 Four words have been given, out of which three are alike in some manner and one is
different. Select the one that is different.
Ans 1. Water
2. Ocean
3. Lake
4. River
Question ID : 54062614481
Status : Answered
Chosen Option : 1
Q.47 Select the option that can replace the question mark (?) in the following series.
I5J8K14L?
Ans 1. M
2. 19
3. 23
4. 17
Question ID : 54062614477
Status : Answered
Chosen Option : 2
Q.48
Ans 1.
2.
3.
4.
Question ID : 54062614486
Status : Answered
Chosen Option : 2
Q.49 Select the option that can replace the question mark (?) in the following number series.
2, 6, 12, 20, ?, 42
Ans 1. 26
2. 22
3. 24
4. 30
Question ID : 54062614480
Status : Answered
Chosen Option : 4
Page - 51
https://testbook.com https://play.google.com/store/apps/details?id=com.testbook.tbapp
Q.50 Select the option that is related to the third term in the same way as the second term related
to the first term.
16 : 20 : : 22 : ?
Ans 1. 18
2. 28
3. 26
4. 24
Question ID : 54062614487
Status : Answered
Chosen Option : 3
Page - 52