Professional Documents
Culture Documents
Note:- Attempt all sections . If require any missing data , then choose suitably IS 800:2007 original copy is allowed.
Section-A 2*5=10
1. State the difference between purlin and grit , describe design of purlin with there load
combination?
2. Two plates 10mm and 18mm thick are to be joined by double cover butt joint design the joint for thefollowing data ,
factored design load = 750KN Bolt =M20, 4.6grade cover plates= 8mm thick each ?
3. What is the importance of wind load ,how it is being calculated for design?
4. Design a double angle discontinuous strut to carry a load of 250KN , the length of the strut between c/c of
intersections is 3.85m?
5. Design a suitable angle section to carry tensile force of 250KN , use welded connection?
Section-C 10*2=20
1. Explain with neat sketch and nomenclature the different types of roof trusses and various load combination, what
are the requirement that are considered while fixing the upper chord slope of trusses?
2.Design a built up tension member to carry a factored force of 340KN, use 20mm diameter black bolts and gusset plate of 8mm
thick?
3.Distinguish between the working stress method, ultimate strength design and limit state design