TROUBLESHOOTING E233
Service Code in Electrical System (Disconnection in PC-EPC solenoid system)
E02
User Code | Service Code | Failure Code
Failure
phenomenon
Disconnection in PC-EPC solenoid
E233 DXAOKA (in governor * pump controller system)
Failure content
+ No current flows to the PC-EPC solenoid circuit
Responsefrom |= None in particular (The solenoid does not function as there is no current flowing fo i)
controller + When the failure cause disappears of itself, the current returns to normalcy.
Phenomenon | . As joad to the pump increases, the engine rotation drops sharply and sometimes the engine stalls.
ceccurring on
oene (The pump absorption torque cannot be controlled)
+ Output to PC-EPC solenoid (ampere) can be confirmed in the monitor function,
fulcive: (Code No. 013: PC-EPC solenoid current)
formation |” lfthere is no abnormality with the solenoid or any ofthe wiring harnesses, the machine can be operated
in a working mode equivalent to E mode by turning the emergency driving switch ON. (At that time the
monitor panel continues to display Service Code No. [E233], but this is not abnormal)
{7 ta T Shiite Ul cae 1 HE al alee earmed cause and standard value in normalcy
PC-EPC solenoid
defective
(intemal short-circuiting)
% Turn the engine starting switch OFF for the preparations, and hold it in the OFF posi-
tion during the troubleshooting.
V21 (male)
Resistance value
Between (1) and (2)
7-140
Emergency pump driving
switch defective
(internal disconnection)
4 Turn the engine starting switch OFF for the preparations, and hold it in the OFF posi-
tion during the troubleshooting.
Emergency pump
S25 ada eutich Resistance value
Normal Max. 10
Between (2) and (5) Emergency Min. 1 MO
Normal Max. 10
Between (5) and (6) Emergency Min. 1 MQ.
Disconnection of wiring
harness
(Disconnection or
defective contact with
connector)
> Turn the engine starting switch OFF for the preparations, and hold it in the OFF posi-
tion during the troubleshooting.
Wiring harness between CO3 (female) (16) and S25
Resistance
(female) (3) value Max. 10
Wiring harness between S26 (female) (2) and V21 Resistance | wae 49
(female) (1) value 7
Wiring hamess between C03 (female) (3) (13)(23) and | Resistance | yay 4g
S25 (female) (6)
value
SAT ll Salas ck Ss
aaa3 (female) (2) ee 7 value Penne
a + Turn the engine starting switch OFF for the preparations, and hold itin the ON position
Short-circuiting of wiring |_Suring the troubleshooting.
harness Between wiring harness between C03 (female) (16) and
4 | (Contact with 24 V cit $25 (female) (3) and grounding Voltage Mai 1,
cuit) Between wiring hamess between $25 (female) (2) and
21 (female) (1) and grounding Voliags | Mac
% Turn the engine starting switch OFF for the preparations, and hold itin the OFF posi-
55 | Governor « pump tion during the troubleshooting.
controller defective C03 (female) Resistance value
Between (16) and (3) (13) (23) 7-140
20-356 PC200/220(LC)-7
(6)