Professional Documents
Culture Documents
Start-up kits
• Keeps your parts organized. With the
specifications in the lid it is easy to find and order
the parts you need.
• Start-up kits are available for the capacities of
100A, 70A or 60A.
• Use the included silicon grease to keep the
O-rings soft and increase their lifetime.
PT 37 Start-up kits
Wear part sets
0558004883 0558008247 0558008248 Item no Description
For ease of ordering and saves money 100 Amp 70 Amp 60 Amp
10 10 10 0558004875 Electrode, Silver
1 1 1 0558005217 Gas Baffle, 30-70 A
PT-37 wear part sets 1 - - 0558004870 Gas Baffle, 90/100 A
0558004886 0558004885 0558008369 0558004884 0558008368 Part No Description 5 5 5 0558005218 Nozzle, 30-40 A
100A 100 A 70 A 50 A 30-40 Amp 5 5 5 0558004878 Nozzle, 50 A
Value Pack - - 5 0558008417 Nozzle, 60 A
- - - - 1 0558005220 Electrode
5 5 - 0558005219 Nozzle, 70 A
10 1 1 1 - 0558004875 Electrode, 5 - - 0558004879 Nozzle, 100 A
Silver
1 1 1 0558006600 Retaining cup,
- - - - 1 0558005218 Nozzle, threaded
30-40 A
5 5 5 0558006603 Shield 30-40A
- - - 1 - 0558004878 Nozzle,
50 A 5 5 5 0558006602 Shield 50-90A
- - 1 - - 0558005219 Nozzle, 5 - - 0558006601 Shield 100A
70 A
5 5 5 85w51 O-ring
15 1 - - - 0558004879 Nozzle,
100 A 1 1 1 17672 Silicon grease
XA00163820
Technical Data Torch holder
Manual adjust, 32 pitch
Permitted load @100% duty cycle, A: 100
gear (10 teeth/inch) for
Air requirements l/min (cfh): 231 (490)
torch with rack.
Air requirements bars (psig): 5.5 (80)
Cuts/pierces max, mm (inch): 19 (3/4)
Severs max, mm (inch): 32 (1 1/4)
Remote hand switch
Wear parts for torch PT-37 Switches on/off the power
to the torch. Enables non-
automated mechanized
cutting using the PT-37
torch.
Connects to the torch
receptacle.
O-ring between shield & torch body Rack = gear with teeth CNC cable interface
0558 003 694 in a straight line Transfers start, automatic
height control and remote
Retaining cup with current control signals from
threads and O-ring Electrode your CNC (Computer
0558 006 600 Silver 50-100A Numerical Control)
O-ring, separate 0558004875 interface to the power
0558 000 734 30-40A 0558 source.
005 220
2012-08-22 / ESAB reserves the right to alter specifications without prior notice
PT-37 Torch w/o rack 17' (5.2 m) 0558 004 895 Leather sheath protection
PT-37 Torch w/o rack 25' (7.6 m) 0558 004 896 Optional accessory that
PT-37 Torch w/o rack 50' (15.2 m) 0558 004 897 protects the torch leads
from abrasion and molten
metal.
Fits most ESAB torches.
Wear parts – start-up and sets
Description Item no
Start-up Kit PT-37, 100A 0558 004 883
Start-up Kit PT-37, 70A 0558 008 247
Start-up Kit PT-37, 60A 0558 008 248
100A value pack 0558 004 886
100A set 0558 004 885
70A set 0558 008 369
50A set 0558 004 884
30-40A set 0558 008 368
Optional accessories
Description Item no
Torch Holder 0558 005 926
CNC Cable interface 15.2m 0558 004 215
Plug N Play Mechanized kit for PC 0558 007 885
Remote Hand Switch , 7,6m lead 0558 008 349
Plasma Flow Measuring Kit 0558 000 739
Leather sheath protection 7,6 m 0558 002 921
Leather sheath protection 15 m 0558 002 922
ESAB AB
Box 8004
SE-402 77 GÖTEBORG SWEDEN
Phone: +46 31 50 90 00 Fax +46 31 22 04 49
E-mail: info@esab.se
www.esab.com