[important Safety Instructions]
+ Tum off power before installation and removal of the circuit board.
+ Tum off power before changing the setting of any DIP switch.
+ Use board edge connectors that conform to the JAMMA standard,
+ Do not touch the heat sink or components when you hold the board since the heat sink and some
components are very hot.
+ Set the board so that the heat sink is always well ventilated,
+ Avoid strong physical shock on the board and do not get it wet.
+ Do not disassemble or rebuild the board.
[Contents]
+ Manual (BBI-O1W) 1 copy
+ Instruction card (BBI-02W) 1 copy
+ Circuit board 1 board
[Settings] [Pin Assignment]
+ Edge connector on circuit board + JAMMA Standard JAMMA Standard
* Monitor Direction VERTICAL SCREEN [/SOLDERSIDE ~ PARTSSIDE |
GND.
+ Supply voltages to the board eno} a}
+5V(2A or greater) +12V(1A or greater) GND} B| 2
(Maintain each voltage within 5% range.) sv] c]3
+ Control Panel sv] 0] 4
ne.| Ee} s
Eight direction lever me |
nl7
CoINcOUNTER2 | J | 6 | COIN COUNTER 1
< PUSH 2 PUBL 2S oeeue (conn tock our) | k | 9 | (COIN LOCK OUT 1)
‘SP(-) | L | 10 | SP(+) \
CHANGE woeoareen | w | 12 | vioconeo
or Bone: FORMATION VIDEO SYNC | P | 13 | VIDEO BLUE
senvicesw | | 14] viDEOGND
no.| s | 1g} — fe 14 7K
ee : conswe| T ig] com sw
Maximum credits-9. START SW2 | U | 17] STARTSW1
apup | v | 18 | 1euP
bk 2p cown | w | 19 | 1P 0OWN
ap ert | x | 20 | 1? LEFT
2priant | y | at | 1 riGHT
appusi1 | z | 22 | 1Ppustt
2ppusi2 | a | 29 | 1 PusH2
zepusia |b | 24 | Puss
no. | ¢ | 25| ne.
no. | 4 | 26 | nc.
eno | e | 27 | eno
ni
GND[Test Mode]
To enter test mode, set DIP switch 1-1 on the board ON, and then turn on power.
Caution: Turn off power before changing the setting of any DIP switch.
Select a test item by moving the 1P lever to the appropriate vertical position and press the 1P
PUSH, The screen for the selected test item appears.
BATTLE BAKRAID
> GAME MODE
Text TEST
osvect Test
Map TEST
SOUND TEST
DIP SWITCH SETTING
CHARACTER TEST
EEPROM INITIALIZE
[DIP Switch Settings]
1,GAME MODE
Brings you tothe game screen for checking
2.DIP SWITCH SETTING
‘lows you to perform input tests, DIP switch seting tess, and monitoring sereen checking
3.TEXT TEST
‘Allows you ta check text to be used during the game
4,OBJECT TEST
‘Allows you to check the objects tobe used during the game,
5.CHARACTER TEST
‘lows you to check the characters to be used during the game,
6.MAP TEST
‘lows you to check the maps to be used during the game,
7.SOUND TEST
‘lows you ta check the sound to be used during the game.
8.EEPROM INITIALIZE
Clears the contents of ho SAVE data
Caution: Selecting thi mode clears the backed-up SAVE data and returns fo te inal state
Allows you to perform input tests, DIP switch setting tests, and monitoring screen checking.
Selecting this mode on the TEST MENU screen initiates the ROM RAM CHECK. On the screen after
the ROM RAM CHECK, pressing the 1P and 2P start buttons simultaneously brings you to the IO
Test,
neni
1 CREDIT
+ CREDIT
NORMAL
CHECK screen.
DIP SWITGH SETTING
Dip ewircH 4
DON. Test MODE
2 Gre SraRtiNe CON
Sore cont
3 Gee con
3 Gre
8 Gre come
FE 1.cOIN
Bip swiTcH 2
ORR START RANK
2 OFF
5 OFF TIMER RANK
§ GFF PLAYER COUNTS
3 Ore EXTRA PLAYER
BEE SCORE RANKING
Ske NO USE’
Ser NO USE
NORMAL
3
2000009
EAGH
OFF
SN
Bisaste
ENABLE
Ore.
SAVE
PRESS 1p 5 2 START
TO CHANGE TEST ITEMS
20IP SWITCH SETTING screen
1.10 CHECK screen
Lets you test switenes, buttons, and the lever ofthe machine.
Ifthe sereen changes from OFF to ON alter you press a switch, a button, and the lever, the
‘machine is verified as normal
Pressing the 1P and 2P start buttons simultaneously brings you tothe DIP SWITCH
SETTING screen.
2.DIP SWITCH SETTING screen
Lets you check the settings of the DIP switches on the board, such as the type of coin and
the degree of citiculty.
(Gee the table of DIP switch settings for each soting)
Caution: Tum ot power before changing the soting of any DIP switch
Check the eottings only onthe DIP SWITCH SETTING screen,
Pressing the 1P and 2P start buttons simultaneously brings you to the COLOR CHECK
3,COLOR CHECK screen
‘lows you te check color shades and brightness ofthe screen using each color bar.
‘Adjust the machine eereen using tho above check results as guidelines.
Pressing the 1P and 2P start buttons simultaneously brings you to the SCREEN CHECK
4,SCREEN CHECK screen
‘Allows you to check the size and distortion of the sereen using the cross-hatched screen.
‘Adjust the machine ecreon using the above check results as guidelines.
Pressing the 1P and 2P start buttons simultaneously intatesretum tothe MENU screen.
I you want to return to a normal game screen after checking the test mode,
tum off power before turn DIP switch 1-1 on the board OFF, and then turn
on power again.[BATTLE BAKRAID DIP SWITCH]
DIP SWITCH Tl2Tst*¢ ts ,el7 [es
TEST MODE NORMAL PLAY OFF |
TEST PATTERN ON
STARTING CON 1 CREDIT OF
2.cneoirs ON
TCON 1 CREDIT ‘OFF | OFF [ OFF
1coIn 2 CREDITS ON | OFF | OFF
1coIn 3 CREDITS ‘OFF | ON | OFF
com 1.COIN 4 CREDITS ‘ON | ON | OFF
2 COINS 1 CREDIT ‘OFF | oFF | ON
3.COINS 1 CREDIT ON | OFF | ON
4 COINS 1.CREDIT OFF | ONL ON
+ COIN CREDIT OFF [OFF
1COIN 2 CREDITS OFF
+.coINn 3.cREDITS ON
coma 1com 4 CREDITS “oN |
2.coIns 1 CREDIT OFF | OFF | ON
| scoms 1 CREDIT ‘ON [OFF | ON
| scons tcreot | OFF | ON ON
FREE PLAY | [on | ON | ON | ON | ON | ON
DEFAULT SETTING Lorr [or Lorr [ore [orr [OFF [orr [Orr
DIP SWITCH2 1 = Ts 4 5 6 Z 8
START RANK NORMAL OFF | OFF
(Game start dticuty seting) | EASY ON | OFF,
HARD OFF | ON
VERY HARD oN | ON
Ifthe customer is not playing the game due to its difculty setting, itis useful to
change the game start dificulty to an easier or a more difficult setting.
TIMER RANK NORMAL OFF [ OFF
(How the dificult rate Low ‘ON | OFF
increases during the game) HIGH (OFF | ON
HIGHEST on [ON
If the playing time per customer Isto long, itis useful to change the difficulty
increase rate to a higher rate and ifthe playing time isto short to lover the rate.
PLAYER COUNTS 3 arr ILORR
4 ON [OFF
2 OFF | ON
1 nL oN
EXTRA PLAYER 2,000,000 EACH ‘OFF | OFK
3,000,000 EACH ‘ON [OFF |
4,000,000 EACH OFF | ON
NO EXTRA ‘ONL ON
DEFAULT SETING ‘OFF [or [orF orF [Orr [OFF LoFr [Orr
DP SwiTcHS Tl2tsPelslelels
SCREEN FLIP oF =
on ON
DEMO SOUND ON ca
NO SOUND ON
STAGE EDIT DISABLE OFF
ENABLE ON
CONTINUE PLAY ENABLE OF
DISABLE ON
INVINCIBLE OFF OF,
on ON
‘SCORE RANKING ‘SAVE OFF
NO SAVE ON
NO USES OFF [OFF
DEFAULTSETTING OFF [or [OFF Lor [OFF [OFF [Orr | OFF