LGN =X)
Rdrieeru ceded)
Classifications
EN ISO 3580-A:2008 : E CrMo2 B32 H10 ksD7022 — :DT2418
EN ISO 3580-8:2008 E02 18-2CIM H10 JIS 73223 :DT2418
AWS A5.5-06 £9018-B3
Description
+ Covering is low hydrogen, iron powder type for all rositions welding of 2.25%4Cr-1%Mo steel used for
steam pipe of boilers cl refining industries, pressure vessels for high temperature service.
+ Preheat at 150-300 and postheat treat at 680-730
+ High deposition rate in all positions.
+ Redry the electrode at 300-400 for 1~2 hours priorto use.
ba
Typical chemical composition of all-weld metal (%)
c Si Mn Pp s Ni cr Mo v
008 0.50 077 001 «001 0.03 2.25 7.02 001
Typical mechanical properties of all-weld metal
Ys Ts EL vw eee
(MPa) (MPa) (%) ze ot on
AWS A55 ‘min. 530 ‘min. 620 min. 17
ENISO3580-A min. 400 ‘min, 500 min. 37
Example 680 750 a 50 35 PWHT
» PWHT : 690Cx1Hr
‘Sizes available and recommended currents (AC or DC +)
Dia. (mm) 26 32 40 50
Length (mm) 360 350 400 400
Amp. F 60.100 90. 120 710. 190 190.260
(A) V-OH 60-80 80-120 110-170 -
Approvals
ce
KISWEL