Professional Documents
Culture Documents
Sample: Product Warranty Certificate Rotomould (Polyethylene) Water Tanks
Sample: Product Warranty Certificate Rotomould (Polyethylene) Water Tanks
Khalid Plastic industries complex W.L.L warrants the 10. Ventilation for the tank should be open.
Rotomould (Polyethylene) water tanks for as follows:
11. Valid only if the tank was clean 3 times yearly with
• 5 years replacement and repair warranty only on valid records.
manufacturing defects.
E
WARRANTY CLAIM
Recommendation: Install under the shade All warranty claims must be made in writing accompanied with
proof of purchase. Khalid plastic industries will assess claims
Our goods come with guarantees that cannot be excluded under for warranty and the result of this assessment communicated
the Qatar Consumer Law. You are entitled to a replacement or in writing. Claims for a warrantable fault in a tank will be re-
refund for a major failure and compensation for any other rea- paired or rectified within two (2) weeks of Khalid plastic indus-
PL
sonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major
failure. The benefits given by the warranty are in addition to a
consumer’s other rights and remedies.
Any failure of the tank due to any of the following causes is not
covered by this warranty:
tries receiving the claim.
Purchased by:
.......................................................................................................
Purchaser’s Address:
.......................................................................................................
1. Normal surface weathering including paint fading or
non-structural surface damage. Tank supposed to .......................................................................................................
be under the shade. .......................................................................................................
M
2. Faulty installation of the tank including the base not Date of Purchase:
fully supporting the tank around its whole bottom
surface in an even and uniform way. .......................................................................................................