Very knowledgeable in sheet metal Good organizational skills Can read blue prints Keen eye for quality and inspection
Professional Experience
Spirit AeroSystems, Wichita, KS 6/18-5/19
MO1 Mechanic I was under contract that ended. I worked in the 11/44 section and the 190 section in plant 2. I was responsible for locating and installing the Wingbox and a belly skin on the 737 line. I used self feeding power drills called quacks. I used countersinks, rivet guns, torque wrenches, did some sealing, painting, also I did quality control.
PMC Aerospace, Wichita, KS 5/17-5/18
Aircraft Mechanic I work at the post robot position, building the 737 aft entry door, we repair and add anything that the robot can’t get to, Drill out rivets, install rivets, blend any rough areas.
Lee Aerospace, Wichita, KS 5/16-5/17
Composite Technician Work with composites to build entry door for Honda Jets. Drill close tolerance holes, apply liquid shim, adjust rods to rig door to close properly. Build up of sub assemblies.
Spirit Aerosystems. Wichita, KS 5/13-4/16
Mechanic Building the 41 section on the 737 line, sealing the wingbox and wheel wells. I have a good knowledge of the aviation industry.
MetalForm Industry, Wichita, KS 6/03-4/12
Running waterjet cutting anything from metal to glass to plastic .Delivery of parts. Running most of the shops heavy machinery and tools. Can operate hydraulic press, cold saw, rivet guns, calipers, can read blue prints. Can operate without supervision .
Education
1992-1996 Wichita Heights High School Graduate
1997-1999 Wichita Area Tech College – Aviation Technician 2013 Work Ready Certificate (silver )