NIPPON KAIJI KYOKAI
TYPE APPROVAL CERTIFICATE
Certificate No. TA21021M
Tl
requirements of “Rules for the Survey and Construction of Steel Ships” and “Guidance for the
Approval and Type Approval of Materials and Equipment for Marine Use”.
is is to certify that the undernoted product has been approved in accordance with the relevant
This certificate is issued to
Applicant: Eagle Industry Co., Ltd. MARINE DIVISION
Manufacturer EagleBurgmann Japan Co., Ltd.
Product description: Water Lubricated Propeller Shaft Bearing
‘Type designation: EVR
Status; Renewal
Approval No.: 96FFO04B
Valid until: 13 March 2026
This certificate is subject to the conditions specified in the attached sheet.
Issued at Tokyo on 22 January 2021
General Manager
Machinery DepartmentNIPPON KAIJI KYOKAI
Attached sheet to the Certificate No.TA21021M qty
‘This approval is conditional upon the followings:
1, The shaft diameter at the bearing part is not to be more than 550 mm.
2. The aftmost bearing length is not to be less than 4 times the required diameter calculated by the
formula in 6.2.4, Chapter 6, Part D of the Rules or 3 times the actual diameter at the bearing part,
whichever is the greater,
3. The bearings are to be fitted in accordance with the manufacture’s recommendations in
compliance with all applicable Rules of the Society.
~The end-