Professional Documents
Culture Documents
2 Examen de Concreto Armado II - Mallqui Guerrero Jhoans Terminado
2 Examen de Concreto Armado II - Mallqui Guerrero Jhoans Terminado
ALUMNO:
DOCENTE:
CICLO:
. IX
CURSO:
. CONCRETO ARMADO II
CODIGO:
. 1416100398
ANCASH - HUARAZ
2022
UNIVERSIDAD SAN PEDRO ESCUELA ACADEMICO DE INGENIERIA CIVIL
P1. The column section in Fig. 12.8 carries an axial load PD =128 K and a moment MD =117 K⋅
ft due to dead load and an axial load PL =95 K and a momentM1 =100 K⋅ ft due to live load.
The column is part of a frame, braced against sidesway, and bent in single curvature about
its major axis. The unsupported length of the column is lu =18 ft, and the moments at both
ends are equal. Check the adequacy of the section using f ′c = 4ksi and fy =60 ksi. (As = A′s =
5) # 9 bars and b=14 in.
P2. Design the reinforcement for a column on the first floor of a four-story building following
the provisions for special moment-resisting frame reinforcement. The column is 30 × 30 in.
and 12 ft high. Nominal flexural strength of the beam framing into the column Mn =650 Kip ⋅
ft. The axial load acting on the second-floor column is Pu =1,920 Kip, axial load acting on the
first floor is Pu =2000 Kip, and minimum axial load in load combination is 1010 K. The shear
force is Vu =120 Kip. Draw the detail of reinforcement.
P3.Rectangular sections with side bars. Determine the load capacity, 𝜙Pn, for the column
section shown in Fig. 11.32 considering all side bars when the eccentricity is ey = 8 in. Use f ′c
= 4 ksi and fy
= 60 ksi.