Professional Documents
Culture Documents
WORLDWIDE LEADING
Operating principles:
• SIGMA operates on the basis of RF absorption measurement in the
probe environment.
Advantages:
• No moving parts.
• Not affected by sticking materials (glue, pigments, paints, pulps etc.)
• Not affected by density and flexibility of the material.
• Not affected by static electricity.
• Suitable for any working condition.
Page 2
• Suitable for all Materials.
SOLIDS
LIQUIDS
Material Samples:
• Pigments for the color industry.
• Paints in containers and industrial processes.
• Glues and adhesives on watery and non watery basis (such as in paper
industry, laminates, gluing metal films on plastic).
• Various chemicals in industrial processes and storage tanks.
• Cement, flour, etc. (in tanks and tankers).
• Level of stones, sand, lime and aggregates in silos at quarries and in
ready- concrete plants.
• Fly-ash and settled ash.
• Plastic raw material.
• Control of level in oil (mineral and organic) - in tanks and tankers.
Special Applications:
• Very corrosive materials (bromines and compounds, hydrochloric acid,
chlorine, etc).
• Materials in high temperature up to 900°c, (reactors, and furnaces).
• Pharmaceutical process
• Distinguish intrusion of oil in water / water in oil
• Liquid – liquid interface separation.
• Keep water contents in material (such as water content in margarine).
• Control of condense water.
• Foam detection and differentiation of foam from liquid.
Page 3
• Very Light materials.
Types of SIGMA RF Level Switch Units
Size – 40mmx40mm
Weight – 60gr
Page 4
Remote SIGMA RF Level Switch Units
For non conductive materials, (powders, For conductive liquids For low conductive liquids
grains, oil…). (and interface separation) (grounding is not necessary)
Or for conductive liquids when Insensitive to foam and adherence
The probe is fully coated. Heavy duty (S.S case)
Insensitive to adherence. Heavy duty (S.S case) Ambient temp. -20cº~80cº
Static electric protection. Ambient temp. -20cº~80cº Connection- M5 thread
Connection- M5 thread
Heavy duty (S.S case). Connection to control box:
Ambient temp. -20cº~80cº Connection to control box: Twin cable 0.5Ø (min)
Connection- M5 thread Twin cable 0.5Ø (min) Distance 1km
Distance 1km Voltage between control box - 10-18 V DC
Connection to control box: Voltage between control box - 10-18 V DC
Twin cable 0.5Ø (min) Conductivity figure >40µs
Distance - 1km Conductivity figure >100µs Sensitivity adjustment – 2k�
Voltage between control box - 10-18 V DC Sensitivity adjustment – 2k� Hysteresis – 3mm
Hysteresis – 1mm Distance between sensors- 10mm
Dielectric figure >1.6 �r Distance between sensors- 1mm
Sensitivity – 0.5pf Size – 30mmx40mm
Sensitivity adjustment – 2k�� Size – 30mmx40mm Weight –80gr
Distance between sensors-200mm Weight –80gr
Size – 30mmx40mm
Weight –80gr
S-BOX S-BOX 12
Din rail control box Din rail control box (includes electronics
parts in one unit) that located up to 10m
For single remote unit. from the probe (tank/vessel etc.). Sigma 807R-902R
Supply voltage – 24VAC/DC, 240VAC. For clean conductive liquids.
For single level or Min / Max system
Power consumption – 1W (max) (selection via a switch).
Connected to one or two remote probes.
Output relay (SPDT) – 5A (max) 240VAC
S-BOX
Electrodes
ERFA ERFT ERFN ERFC
Functions Standard for Non Standard for Non For very light For long deep
Application conductive or conductive conductive or conductive Powders Detection
materials materials
Body S.St 316 +PTFE S.St 316 +PTFE S.St 316 +PTFE S.St 316 +PTFE
material Option: other matrial Option: P.V.C low cost Up to 6m
Head connection Aluminum (code 0), S.ST 316 (5), P.P (3), CAST IRON (2), EEXD (4)
For aggressive materials For aggressive materials For food, High Pressure
Top Mounting Side Mounting pharmaceutical min & or max system
P.P, P.V.C, P.P, P.V.C, S.St 316 +PTFE S.St 316 +PTFE
PTFE.(welded) PTFE. up to 200mm
Above 1/2" Above 1" Above 1" Threaded Above 1/2" Threaded
Threaded or Flange Threaded or Flange or Flange Triclamp or Flange Triclamp
Aluminum (code 0), S.ST 316 (5), P.P (3), CAST IRON (2), EEXD (4)
Process Connection
Options
SIGMA XXX
Note: When SIGMA remote unit is been chosen S-BOX (control box) is required
Page 8