Professional Documents
Culture Documents
` Product Bulletin
M O DE L 1 2 - 1 0 1 5
5043 Farlin Ave.
St. Louis, MO 63115
www.associatedequip.com
Digital Battery Electrical
System Analyzer Tester
with Thermal Printer and
USB Port
Approved by several OEM Vehicle and
Battery Manufacturers
Features:
• Light weight hand‐held digital battery tester with
Thermal Printer and USB Port
Specifications • Stores last 250 test series with or without power
• Tests all types of Flooded Acid Batteries, AGM Flat
Model Number 12-1015 Plate and Spiral, Gel Cells and Enhanced Flooded
Load Resistance Batteries
• Back lit display for easy reading in all light conditions
Volt Meter 9-15 Volts DC • Performs Ground Test
Battery CCA Test Range 100 – 1700 CCA • Battery test displays:
- Battery Good or Replace
Leads 6 FT - Imputed CCA of test being performed
Clamps Kelvin Connection - Battery CCA Rating after Test
- Open circuit voltage of battery at test
Warranty 1 Year - Internal Resistance of battery
Display 10 Line LCD Display - Estimated remaining life of battery in
percentage
Weight 3.5 lbs • Starter Test displays:
Shipping Dimensions 10.5” x 14.5” x 4.5” - Lowest voltage of battery during start
- Voltage Drop – Normal/High
• Alternator Test displays:
- Good/Low/High
- Average / Max / Min during test, for loaded
and no load test
- Checks diode ripple
• Carrying Case and cables included
© 2015 Associated Equipment Corporation. All rights reserved. Because of ongoing product improvements, we reserve the right to change design, materials, and
specifications without notice. Product shipped may differ from photo(s) shown.