‘bp to teraton
sa 20770
2-Multi-band Panel 1710-2170 | [1710-2170] KATHREIN
Dual Polarization x x Antennen - Electronic
Half-power Beam Width 65° 6°
Adjust. Electr. Downtilt [0°-8* 0° 8°
set by hand or by optional RCU (Remote Control Unit)
XXPol Panel 1710-2170/1710-2170 65°/65° 18/18dBi 0°-8°/0°-8""
Type No, 742 234
Frequonay ange
1710-1880 MHz _| 1850 TSO MHz | 1920-2170 MH
Polarization B®, 45°, 45°, 45" | AS", AS", AS", AG | 6A, A, A, AP
Gain ‘Tx 175 dBi Ta t7 7 dB TAT dBi
Horizontal Pattor
Half power beam with oe & a
Front-to-back ratio. Copolar > 2508 | Copolar. > 2548 | Copolar > 25.08
Total power: > 25 68 | Total power: > 25 a8 | Total power: > 25 0B
(Cross polar ratio
Manaivecion 0° | Typically: 25.48 | Typically: 258 | Typically 25 463
Sector 200" S106 31006 1008,
Vertical Pattern:
Halk-power beam with = ar cy
Electrical tt (-8%, continuously adjustable
Sidelove suppression orfirsi OF 2.5 BT | Os eT | Oo BT
sidelobe abova main beam [17.17 115.1158] 20.20.18." 1B.¢B | 20.20.18. 16.08,
“Wpedance id 300
VSWR 15
Isolation, betwoen inputs 33005
Intormadulation IMS “2150 de (2 x 43 dBm caren)
Max. power per input ‘300 W (at 50 °C ambient temperature)
Horontal Pattern Vertical Patern
(0°-8" electrical downtit
1850 - 1990 MHz: +45/-45° Polarization
1710-2370] [1710-2170]
ac
1710-2170] [1710-2179]
a ay
Horizontal Pattern Vertical Patorn
0°-8" electrical downtit
1920 - 2170 MHz: +45°/—45° Polarization
Horizontal Pattern Vertical Pattern
(0°-8" electrical downtit
Interne nn ora ke de
a5 85° 5"
re 76 76 m6
Mechanical specifications
Input 4x 7-16 female
‘Connector postion Battom
‘Adjustment 2x, Poston bottom
mechanism continuously adustable
‘Weight 15519
Wind load Frontal: 570 N (at 150 kmin)
Lateral TION (at 150 kmh)
Fearside. 570 N (at 150 km)
Max. wind valooity 200 kmh
Packing 820 1580 x 820 x 108 mm
Heightadthidepth 1304/ 299/03 mm
rama Page Tote
KATHREIN Werte KG Anton Katie Stabe 13" PO. Bor 10 845 Ga008 Rosennem Germany Prone o49 B05) 1640 Fax vf GOT TESTSAccessories KATHREIN
General Information Antennen - Electronic
Accessories (order separately) 2
Be
9e No. scription jemarks sion ume 2
boas ae a approx | antenna ‘Lae
751 61 aan Mast. 20- Ginmdametr | 3009 2 T
738 546 Taam Mast_80~ 118 nm aameter | 10 Kg z i
1850 10002 | 1 damp Mast. 110220 mm diameter | 27 a 2 i
50 10009 | 1 damp Mast 210980 mm diameter | 40K 2
758677 Telamp Mast. 00= 115mm diameter | 204g 2 |
738 678 clamp Mast 115-210 mm diameter | 26k9 2 |
739.670 “aamp Mast 210-480 mmdametar | 409 2 i
753 680 ‘Team Mast $60 521 mm diameter [5949 2 i
737 074 TTaowniie kt | Down angie O° — 16° 28% 1 sag
For downtiit mounting use the clamps for an appropriate mast diameter together with the cowntit kit. errr
Wal mounting, No addtional mounting kt needed i
Matoria: Retloctor soon: Tirplatad copper. Radiator: Tn-plated zine i
Flat fiberglaes radomo: Tho max radome cept is aly 69 mm. Fibs:
lass material guarantees optimum performance with regards to stabily, |
Satins, UV resistance and painting, The colour of te radome io sey
Al screws and nuts: Stainless steel |
Grounding “The metal pais of the antonna inclucing the mounting kit and the inner |
conductors are OC grounded.
Environmental conditions: Kaltein celular antennas ae designad 10 operate under the envicon-
mmantalconatons as dascabed in ETS 300 010-1-4 class 4.1 E 7
‘The antennas exceed this standard with egarate the folowing tems: vnimia
Low temperature: -55 °C mechan
= High temperature (8): +80 °C wit tegrated Scale
lee protection: Due tothe vary study antenna constiuetion and the 40
protection of ho radiatg Systm bythe recom, tha antenna romans ——
peraonal even unde ey conctons a rece)
& oa
Environmental teste:
Please note:
Go
a
Pagel oft 742204)
RATHREIN Werve KG- Aron Katnven Grate 1—O-PO. Box 10 444 -Galos Rosenheim - Germany Prone 48001 TeH0- Fax +49 B07 184873
Kattvein antennas have passed environmental tests as recommended =
In ETS 300 019-2-4, The homogenous design of Katrain’s antenna + a
famites use dential madules and materials. Extensive tests have baen Bottom view
performed on ypcal samolas and modula.
jc
1710-2170 Lat | Fight 1710-2170
Layout of interface
{As a result of more stringent legal regulations and judgements regarding product lability, we are
obliged to point out certain risks that may arise when products are used under extraordinary operating
conditions.
“The mechanical design is based on the envranmontal conitions as stipulated in ETS $00 010-1-4, which
includes the static mechanical load imposed on an antenna by wind at maximum velocity
Extraorcinary operating concition, such aa heavy icing or exceptional dynamic stress (6.9. strain caused by
scilating supcor structures). may result inthe breakage of an antenna or even cause it fal (0 the ground
These facts must be considered during the sita planning process.
‘The installation toam must be properly qualified and also be familar withthe
regulations.
‘The details given in our data sheets have to be followed carefully when installing the antennas and
accessories.
‘The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers
‘must be obeyed.
vant national safety
‘Any provious datashect Iestos have now become invalid.
Inte. te vw kan de
‘bet to teratonGeneral Instructions KATHREIN
for Adjustment Mechanism Antennen - Electronic
Description of the adjustment mechanism (protective cap removed):
® y
1@ Ne ~
Manual adjustment procedure:
Remove tne protective ca. ‘Set downtit angle by rotating the ‘Sore on the protective cap again.
agjusiment wheel
Optional: RCU (Remote Control Unit) for remote-controlled downtilt adjustment:
For a description of RCU installation please refer to the respective data sheet.
Interne nn ora ke de Ta waa Page TAF
KATHREIN-Werke KG- Amon KatnrenSvate 1=3-FO Bax 1000 44” Go004 Resennem Gatmany- Prone sa 60ST 1840 Fax v48 6001 1O8STSGeneral Instructions for Feederline Installation KATHREIN
on Panels with four Connectors Antennen - Electronic
arranged on two Levels
Please note: In order not to damage the interfaces, please make sure that only the right tools are used
Tighten the feederline connector interfaces solely by using a common torque-wrench with a suitable wrench
wiath,
Description of connector arrangement:
‘There are four intertaces for feeding the antenna ‘The connectors are mounted at two levels in order to facitate feedertine
located at ha botom instaianon
Attachment of the feederline connector and RCU (optional):
In order to protect the adjustment mechanism the protective caps have to be attached during
federline installation!
: i i
‘Stan wih the rearside located inter: ‘fer fosdorine instalation the optional For a tll description of RCU installation
face n0. 1 remote contel units (RCU) can be please refer othe respective data sheet
Place the connector carefully and fx tne‘ Mounted if required
rut using @torque-wrench (according 0
the manufacurers guidelines)
The futher sequence forthe instalation
Is-foedarines no. 2, 3,4
Please note: Additional weather sealing of correctly installed federline connector interfaces is not required,
nor is it recommended by the connector manufacturers.
Page Soft 742 204) Inte. te vw kan de
KATHE Werte KG. Anion Kanven Siabe 1S PO, Box 10 0442 BHO" Rosenheim Germany Prone 49 B0GT TSH0- Fax o49 60ST TH97S
‘bet to teraton