Professional Documents
Culture Documents
Smart watch
LW11
Download and Log into APP
Magnetic charger
Bluetooth Pairing
Finish
①
②
③
④
⑤
Sports Data
Click the data icon to enter
sports data interface and
check the corresponding date
for the day: steps, distance
and calorie;
Notification
Push Notification:all
notifications ofyour phone will be
automatically synchronized to the
bracelet after a successful
connection between the bracelet and
APP (the bracelet can save unread
notifications up to 15);
Blood Pressure
Monitoring
After a successful switch, it
starts to measure after the
bottom green light is on; it takes
about 30~60s to measure and the
measuring value is based on PPG
technology;
Blood Oxygen
Monitoring
After a successful switch, it
starts to measure after the
bottom green light is on; it
takes about 30~60s to
measure and the measuring
value is based on PPG
technology;
Sports Mode
Enter Sports Mode to enjoy
various exercise modes:
hiking, running, climbing,
cycling, basketball, yoga and
elliptical machine;
Stopwatch
Time: click the triangle icon
to start and click again to
pause (the left icon
means resetting);
Music
Play Music: After a successful
connection, open music player
to control;
Adjust Brightness
Settings - Brightness - Adjust
Brightness (“+” and “-” can
be used to control);
Dial Switch
Long press dial plates to
switch (4 styles are
available); support to push
dial plates;
On/Off
Long press “On/Off” key for
3s to power on. The bracelet
will automatically power on
when it is charging. Click the
“Off” icon to power off;
Language Switch
After a successful
connection,it will
automatically recognize and
match the mobile language.
Select language in the menu to
set;
System Information
Check the bracelet’s
information such as Bluetooth
name, Mac address, firmware
version and UI version;
Restore Factory
Settings
All personal data will be
removed if you confirm to
restore factory settings.
Parameters
Customer Information
Customer
Address
Seller
Address
Abstract
Overhaul .Remarks
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
This device may not cause harmful interference, and this
device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving
antenna.Increase the separation between the equipment and
receiver.Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.Consult the dealer or an experienced radio/TV
technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.