Professional Documents
Culture Documents
SJ-20200606171511-010-ZXMW NR8961 (V3.05.02) System Description - 980973
SJ-20200606171511-010-ZXMW NR8961 (V3.05.02) System Description - 980973
Version: V3.05.02
ZTE CORPORATION
No. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
URL: http://support.zte.com.cn
E-mail: support@zte.com.cn
LEGAL INFORMATION
Copyright 2020 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction
or distribution of this document or any portion of this document, in any form by any means, without the
prior written consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document
All company, brand and product names are trade or service marks, or registered trade or service marks,
This document is provided as is, and all express, implied, or statutory warranties, representations or
conditions are disclaimed, including without limitation any implied warranty of merchantability, fitness for
a particular purpose, title or non-infringement. ZTE CORPORATION and its licensors shall not be liable
for damages resulting from the use of or reliance on the information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or
applications covering the subject matter of this document. Except as expressly provided in any written
license between ZTE CORPORATION and its licensee, the user of this document shall not acquire any
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without
further notice.
Users may visit the ZTE technical support website http://support.zte.com.cn to inquire for related
information.
Revision History
I
7.3.1 Receiver Signal Level Threshold........................................................... 7-17
7.3.2 RSSI and RSL........................................................................................7-22
7.4 System Capability............................................................................................... 7-23
7.4.1 System Transmission Capacity.............................................................. 7-23
7.4.2 Channel Spacing.................................................................................... 7-25
Figures............................................................................................................... I
Tables................................................................................................................ II
Glossary.......................................................................................................... IV
II
About This Manual
Purpose
This manual provides information about the system structure, system principles,
configurations, networking modes, operation and maintenance, and technical
specifications of the ZXMW NR8961.
Intended Audience
This manual is intended for technical personnel who perform operations on the ZXMW
NR8961 digital microwave transmission system.
Chapter 1, Overview Describes the system composition, external view, and functions of
the ZXMW NR8961.
Chapter 2, System Structure Describes the hardware structure, and software structure of the
ZXMW NR8961.
Chapter 3, System Principles Describes the clock principle, power supply principle, and
operation and maintenance principle of the ZXMW NR8961.
Chapter 5, Networking Modes Describes the point-to-point networking mode of the ZXMW
NR8961.
Chapter 6, Operation and Describes three operation and maintenance modes of the ZXMW
Maintenance NR8961: LMT, NetNumen U31 EMS and CLI.
Chapter 7, Technical Indexes Describes the technical specifications of the ZXMW NR8961.
Conventions
III
Typeface Description
IV
Chapter 1
Overview
Table of Contents
System Composition...................................................................................................... 1-1
External View................................................................................................................. 1-2
System Functions...........................................................................................................1-3
OBU
OBU provides core control, baseband processing, switching and service access
function. As an entire system, it is connected with ODU via an intermediate
frequency (IF) cable.
ODU
ODU is the outdoor unit of the NR8000 split-type system. It delivers power
amplification and radio frequency (RF) conversion functions.
ZXMW NR8961 supports four types of ODU – SRU, SRU2, HRU and HRU2F.
st
→ SRU: The 1 generation normal transmit power ODU, operates in the frequency
range of 6 to 42 GHz (6/7/8/10/11/13/15/18/23/26/28/32/38/42 GHz), support
QPSK to 4096 QAM modulation scheme and 7/14/28/40/56 MHz channel
bandwidth.
nd
→ SRU2: The 2 generation normal transmit power ODU with better Tx. power,
smaller dimension and less weight, operates in 13/15/18/23/26/38 GHz, supports
QPSK to 4096 QAM modulation scheme and 7/14/28/40/56/112 MHz channel
bandwidth.
st
→ HRU: The 1 high transmit power ODU, operates in 6/7/8/11 GHz, support QPSK
to 2048 QAM modulation scheme and 7/14/28/40/56 MHz channel bandwidth.
nd
→ HRU2F: The 2 generation high transmit power ODU with enhanced Tx. power,
which operates in 6/7/8/11 GHz, support QPSK to 4096 QAM modulation scheme
and 7/14/28/40/56/112 MHz channel bandwidth.
Antenna
Antennas directionally transmit, converge, and receive electromagnetic wave signals.
In the transmitting direction, the electromagnetic waves sent from waveguides are
polarized and radiated.
In the receiving direction, the received electromagnetic waves are polarized and
converted into electromagnetic energy and transmitted by waveguides.
LMT
The LMT operation and maintenance software is embedded in the OBU. A user can
access the OBU through the web browser installed on a PC to manage a single NE.
NetNumen U31
The NetNumen U31 EMS communicates with the OBU through the SNMP protocol
and manages multiple NEs.
There are four types of ODU: SRU, HRU, SRU2 and HRU2F.
Radio Adaptive Coding ACM is a technology that can automatically adjust the coding
and Modulation ( and modulation mode in accordance with channel quality. When
ACM) the channel quality is good, the ACM function improves system
transmission efficiency and spectrum utilization. When the channel
quality is deteriorated, the ACM function ensures the link reliability
of high-priority services.
XPIC-MIMO Two ZXMW NR8961 devices work at the same frequency point.
Two RF channels in each ZXMW NR8961 are configured in a
CCDP group. Each one of the two ZXMW NR8961 devices is
connected to an antenna and implements MIMO configuration.
In such configuration, the transmission capacity has a fourfold rise.
Ethernet With this function, the contents that are unchanged but repeatedly
frame header transmitted in Ethernet data frames, such as the MAC address,
compression on the type and address in the IP /UDP header, are replaced by short
the air interface ( bytes at the transmitting end. This function increases the Ethernet
HC) service transmission throughput for a fixed bandwidth.
Load balance The ZXMW NR8961 supports Ethernet load balance and XPIC
to implement large-capacity transmission.
The Ethernet load balance function is implemented through
Physical Link Aggregation (PLA).
Packet With the PIS function, the ZXMW NR8961 can determine the
Intelligence priorities of Ethernet data on the air interface, and preferentially
Segment (PIS) schedule the services with higher priority. The air interface
function preferentially sends the Ethernet messages with higher priority.
QoS QoS is a network mechanism that helps solve network delay and
congestion problems.
The ZXMW NR8961 determines the scheduling priority of a
packet in accordance with the information such as 802.1q
priority and DSCP priority in the packet. It ensures that important
packets are not delayed or discarded and the network can
operate properly.
Supports SP, DWRR, WFQ, SP+DWRR, and SP+WFQ.
Supports three packet discarding functions: tail drop and random
early detection, and weighted random early detection.
Supports traffic shaping at service egress.
Supports the black/white list function of access control lists.
2.1.1 OBU
Figure 2-1, Figure 2-2 and Figure 2-3 show the hardware structure of the OBU.
1. IF1
2. WIFI
3. M_OUT
4. COMBO
5. XGE2
6. GE4
7. PWR
8. GND
9. IF2
10.M_IN
11.XGE1
12.XGE3
13.GE5&PoE
2.1.2 ODU
There are four types of ODUs: SRU, SRU2, HRU and HRU2F.
HRU 6/ 7/ 8/ 11
HRU2F 6/ 7/ 8/ 11
Environment management
This subsystem manages and updates resource status in a centralized manner, and
provides resource-related operating interfaces for other subsystems.
The ETM sub-system implements the port configuration, VLAN configuration, and QoS
configuration based on the configuration data, and implements related switching chip
functions, for example, Ethernet loopback.
This subsystem transceives incoming/outgoing packets of the CPU, and provides the
unified hardware operating interface for upper-layer service processing entities.
This subsystem manages Intermediate Frequency (IF) and Radio Frequency (RF)
devices, implements the Automatic Transmitter Power Control (ATPC) function, and
protects RF links.
BSP Subsystem
This subsystem drives bottom-layer hardware and provides the hardware Application
Programming Interface (API) for upper-layer subsystems.
For the input/output clock sources supported by the ZXMW NR8961, refer to Table 3-1.
SyncE synchronous gigabit/ The ZXMW NR8961 supports ITU-T G.8262 standard
megabit Ethernet clock Master-output/Slave-input
mode. The synchronous
Ethernet clock signal is input
or output from the GE electrical
port or GE optical port.
Microwave air-interface clock The ZXMW NR8961 restores ITU-T G.813 standard
the clock signal from the air
interface, and uses it as the
system reference clock source.
For a microwave network that consists of ZXMW NR8961 and other microwave devices,
time synchronization of the entire network uses the primary/secondary synchronization
mode.
An NE node in the microwave network is configured to serve as the primary clock, and
synchronizes with the upper-level high-precision clock. It is configured with a high-
precision local crystal oscillator, which is used for keeping the clock or as the primary
clock when no external high-precision clock is available. Other NE nodes in the network
trace the primary clock, and control corresponding lower-level NE nodes in accordance
with the primary clock.
Figure 3-1 shows the clock signal transferring diagram of the ZXMW NR8961.
1. After the system clock of NR8961 alocks a SyncE clock, it transfers the clock signal
to NR8961 bthrough the microwave air interface. The signals will serve as the
reference clock source of NR8961 b.
2. NR8961 b can lock its system clock to the reference clock source and outputs the
system clock signal to implement the clock transferring function.
The OBU boards use a -48 V power supply. The external power supply is connected
to the -48 V power output interface of the outdoor cabinet or the equipment room. In
addition, the OBU supports the POE mode through the Ethernet port.
For the DC mode, considering the loss over long cables, the voltage of the 48 V
power on the ground must be at least 45 V DC. Figure 3-2 shows the power supply
structure.
For the POE mode, a PSE voltage rising module is added in the outdoor cabinet or
equipment room. This module enables the -48 V voltage (ranging from -40 V to -60
V) to rise to -54 V DC. The efficiency of conversion to 2 A current can reach 87.5%.
Figure 3-3 shows the power structure.
Power Distribution
One way of the -48 V input power supplies the TRX. The other way supplies the
ACMUC of the digital board. The DC/DC conversion of 48 V to the required voltage
is performed respectively on the two boards. Figure 3-4 shows the power distribution
diagram.
The ZXMW NR8961 provides various login methods and configuration management
methods to facilitate equipment maintenance. Users can select appropriate connection
configuration modes in accordance with actual conditions.
LMT configuration mode
Users manage equipment through the HTTPS or HTTP protocol. After entering the
IP address of a ZXMW NR8961 in the Internet Explorer, users can log in to the WEB-
formed LMT system and manage the equipment.
Data Management
The data management module helps users manage the ZXMW NR8961 configuration
data. It ensures that the configuration data can be issued to each service board reliably
and accurately.
Data Storage: In the ZXMW NR8961 system, the main control board uses a 256 MB
flash and an SD card to save data. The flash stores BOOT version files and the SD card
(default capacity: 2 GB) stores various files, including version files, configuration files,
exception log files, and performance files.
Security Management
The security management module helps LMT users maintain the operation rights,
including querying rights, adding rights, deleting rights, and setting rights and passwords
for users.
The ZXMW NR8961 uses the user rights hierarchy function to manage the equipment
operation commands. The configuration right and browsing right are available to users.
Those who only have the browsing right can only access the configuration window but
cannot modify the configuration data.
Up to 10 users can be added through the security management module. There are 15
user levers.
The administrator can log in to the LMT, perform all query operations and
configuration operations, add or delete users, configure user lock information, enable
or disable users.
An operator can perform query operations and configuration operations.
A browsing user can only perform query operations.
All users can modify their own passwords.
The security management module also provides the IP rule filtering function and the
Trap IP control-table enabling function for the NetNumen U31 system.
Figure 3-5 shows the security management signal flow.
Alarm Management
The monitoring and maintenance module helps users not only find all faults of the
equipment but also troubleshoot the faults in a timely manner. It ensures proper
operations of the equipment.
1. Equipment Monitoring
The maintenance terminal provides all alarm information of the equipment and
monitors the status and operations of the equipment in real time. It handles all
abnormal alarms that affect the equipment operations in a timely manner to
ensure that the equipment can operate properly.
Alarm information has 1-5 levels. Alarm levels enable users to handle critical
alarms as soon as possible.
Indicators are designed on the ZXMW NR8961 panel. The color and flashing
frequency of each indicator reflects the operating status of the equipment.
The ZXMW NR8961 uses the active/standby configuration. When the active
equipment becomes faulty, the system automatically perform active/standby
equipment switchover to ensure that the system can operate properly.
2. Equipment Maintenance
The multi-user operation mode is implemented through the user rights hierarchy.
During the equipment operating process, all alarm information is recorded. When
a fault occurs, users can find the fault causes through the log information and
troubleshoot the fault in a timely manner.
When the equipment is powered down or restarts, the system provides a special
alarm handling policy to ensure that the original alarm information will not be lost
after the equipment is powered on or restarted.
Association or filtering shielding processing is performed for redundant alarms of
the equipment, ensuring that important alarms are provided.
In the LMT system, users check the operating status of the equipment or system.
Users can check the service performance data of the equipment, including 15-
minute performance data for one day and 24-hour performance data for 7 days.
The ZXMW NR8961 provides various diagnosis and debugging methods, helping users
get sufficient debugging information during the equipment debugging process.
The ZXMW NR8961 provides a dedicated diagnosis and debugging command mode
and comparatively complete diagnosis and debugging functions. Users can check the
equipment at any time, and remotely find and locate faults.
Software Upgrading
The ZXMW NR8961 supports software upgrade through Local Maintenance Terminal (
LMT) ,Command Line Interface(CLI) or Element Management System (EMS).
Note
5.1 Overview
The ZXMW NR8961 is designed to provide transmission solutions for the entire mobile
backhaul. Figure 5-1 shows the networking application.
At the end access site, if full-IP services are accessed, the ZXMW NR8961 can
directly connect to the base station and totally be installed outdoors. This reduces
the cost of on site renting and engineering. If various services are accessed, the
ZXMW NR8961 needs to used with IP transmission devices.
At a relay site, two ZXMW NR8961 devices need to be connected through a data
cable to accomplish zero footprint installation.
At an aggregated site, the ZXMW NR8961 needs to operate with IP transmission
devices to accomplish multi-directional aggregated transmission.
6.1 LMT
Functions
Note
Networking
After connecting a PC to the OBU through an Ethernet cable, users can access the
equipment through the browser on the PC, see Figure 6-1.
The PC can access OBU through the LMT software embedded in each device.
Users can log in to an through its IP address from the PC and perform management
functions such as alarm management and configuration management.
6.2 EMS
Functions
The NetNumen U31 system is an EMS. Users can access the NetNumen U31 server
through a NetNumen U31 client to accomplish the unified management of all NEs in the
network.
The NetNumen U31 system provides NE-level management functions. It also supports
the function of connecting upper-layer network management systems.
NetNumen R31 performs the following NE-level management functions.
Alarm management
Configuration management
Performance management
Security management
Topology management
Networking
6.3 CLI
Functions
After logging in to the device through SSH or Telnet, you can use the command lines
provided by the device to manage and configure the device.
SSH: enabled by default.
Telnet: disabled by default.
Networking
Connect the computer to the LMT port of the device with a network cable, see Figure
6-5.
OBU 4.5 kg
SRU2 2.0 kg
HRU 5.5 kg
-48 V DC (-40.5 V ~ - 57.6 V DC) Supply power for OBU & ODU
220 V AC (100 ~ 220 V AC)
Power Consumption
OBU 38.5 W
18/26/38 GHz:
24 W (Typical value)
26 W (Maximum transmit power)
22 W (Green power mode)
16 W (Mute mode)
HRU2F 7 GHz:
55 W (Typical value)
57 W (Maximum transmit power)
53 W (Green power mode)
18 W (Mute mode)
MTTR≤1 hour
Note
10/ 11/ 13/ 15/ 18/ 23/ SRU & HRU 250 kHz ±5 ppm
26/ 28/ 32/ 38/ 42 GHz
Tx/Rx Spacing
266 (L6)
340 (U6)
168
196
245
151.614
154
208
266
283.5
294.44
300
305.56
310
311.32
500
530
490
644
728
1120
1560
644
728
1560
340 (U6)
196
245
208
266
283.5
300
310
311.32
IF Signal TX (OBU TX, ODU RX) 350 MHz OBU: 0 dBm to +2 dBm
ODU: -23 dBm to +2 dBm
IF Signal RX (ODU TX, OBU RX) 140 MHz OBU: -30 dBm to -8 dBm
ODU: -15 dBm to -8 dBm
SRU
Table 7-13 Transmitter Power & ATPC Range - SRU Part 1: 6 GHz -15 GHz
Frequency 6 7 8 10 11 13 15
Band (GHz)
QPSK 30 28 28 26.5 28 26 26
16 QAM 28 24 24 22.5 25 24 24
32 QAM 26.5 24 24 22 24 24 24
Guaranteed ±2.0 dB
Frequency 6 7 8 10 11 13 15
Band (GHz)
QPSK 9 -2 -2 2 6 -4 -4
16 QAM - 4096 9 -6 -6 2 6 -6 -6
QAM
QPSK 21 30 30 24.5 22 30 30
16 QAM 19 30 30 20.5 19 30 30
32 QAM 17.5 30 30 20 18 30 30
Table 7-14 Transmitter Power & ATPC Range - SRU Part 2: 18 GHz -42 GHz
Frequency 18 23 26 28 32 38 42
Band (GHz)
QPSK 24 24 25 25 23 23 21
64 QAM *21/20 21 19 19 17 17 16
Frequency 18 23 26 28 32 38 42
Band (GHz)
Guaranteed ±2.0 dB
QPSK- 4096 -6 -6 -1 -3 -3 -3 -3
QAM
QPSK 30 30 26 28 26 26 24
64 QAM *27/26 27 20 22 20 20 19
Note
SRU v1.3: QPSK-1024 QAM; SRU v1.4: QPSK-2048 QAM; SRU v1.5: QPSK-4096
QAM.
"*" means Data @ 7/14/28 MHz / Data @ 40/56 MHz.
SRU2
Transmitter power of SRU2 is shown in Table 7-15, Table 7-16 and Table 7-17.
Table 7-15 Transmitter Power & ATPC Range - SRU2 Part 1: 13 GHz/ 15 GHz
Frequency 13 15
Band (GHz)
16 QAM 26 25 25 24 23 26 26 26 25 23
32 QAM 26 25 25 24 23 26 26 26 25 23
64 QAM 25 25 24 23 22 25 25 25 24 22
128 QAM 25 25 24 23 22 25 25 25 24 22
256 QAM 24 24 24 23 21 24 24 24 23 21
512 QAM 24 24 24 23 21 24 24 24 23 21
1024 QAM 22 22 22 21 19 22 22 22 21 19
1024 QAM 22 22 22 21 19 22 22 22 21 19
light
2048 QAM 22 22 22 21 19 22 22 22 21 19
Guaranteed: ±2.0 dB
ATPC Range (dB): From minimum transmitter power to maximum transmitter power.
Table 7-16 Transmitter Power & ATPC Range - SRU2 Part 1: 18 GHz/ 23 GHz
Frequency 18 23
Band (GHz)
Frequency 18 23
Band (GHz)
Guaranteed: ±2.0 dB
QPSK-4096 -5 -5
QAM
ATPC Range (dB): From minimum transmitter power to maximum transmitter power.
Table 7-17 Transmitter Power & ATPC Range - SRU2 Part 1: 26 GHz/ 38 GHz
Frequency 26 38
Band (GHz)
QPSK 22 22 22 22 22 20 20 20 20 20
16 QAM 21 21 21 21 21 18 18 18 18 18
Frequency 26 38
Band (GHz)
32 QAM 21 21 21 21 21 18 18 18 18 18
64 QAM 20 20 20 20 20 17 17 17 17 17
128 QAM 20 20 20 20 20 17 17 17 17 17
256 QAM 20 20 20 20 20 16 16 16 16 16
512 QAM 19 19 19 19 19 16 16 16 16 16
1024 QAM 19 19 19 19 19 16 16 16 16 16
4096 QAM N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
Guaranteed: ±2.0 dB
QPSK-4096 -3 -3
QAM
ATPC Range (dB): From minimum transmitter power to maximum transmitter power.
Note
HRU
QPSK 33 33 33 31
16 QAM 31 31 31 30
32 QAM 30 30 30 29
64 QAM 30 30 30 27
128 QAM 30 30 30 27
256 QAM 29 29 29 26
512 QAM 27 27 27 24
1024 QAM 26 26 26 23
2048 QAM 25 25 25 22
Guaranteed ±2.0 dB
QPSK 28 28 28 26
16 QAM 26 26 26 25
32 QAM 25 25 25 24
64 QAM 25 25 25 22
128 QAM 25 25 25 22
256 QAM 24 24 24 21
512 QAM 22 22 22 19
1024 QAM 21 21 21 18
2048 QAM 20 20 20 17
Note
The values of QPSK to 1024 QAM are available for HRUv1.3/ v2.0.
The values of 2048QAM are available for HRU v2.0.
HRU2F
QPSK 32 32 32
16 QAM 32 32 32
32 QAM 32 32 32
1024 QAM 30 30 30
2048 QAM 30 30 30
Guaranteed ±2.0 dB
64 QAM 20 20 20
128 QAM 20 20 20
256 QAM 19 19 19
512 QAM 19 19 19
Frequency Band ( 7
GHz)
-6
Typical RSL with SRU/SRU2 (BER=10 )
Maximum RSL (dBm) QPSK-256 QAM: -20; 512 QAM- 2048 QAM: -22; 4096QAM: -25 @
BER <10-6 (7/8/13/15/18/23 GHz SRU/SRU2).
QPSK-256 QAM: -20; 512 QAM-2048 QAM: -23 @ BER <10-6 (26/38
GHz SRU2).
Note
13.75/ 27.5/ 55/ 110 MHz is applied for 18 GHz. 112 (110) MHz is applied for SRU2.
13/15/18/23/26/38 GHz SRU2 is available.
The values of QPSK to 1024 QAM are available for SRU v1.3/v1.4/v1.5/SRU2.
The values of 2048 QAM are available for SRU v1.4/v1.5/SRU2.
The values of 4096 QAM are available for SRU v1.5 / SRU2 13/15/18/23 GHz.
-6
Typical RSL with HRU (BER=10 )
Note
The values of QPSK to 1024 QAM are available for HRU v1.3.
The values of QPSK to 2048 QAM are available for HRU v2.0.
-6
RSL threshold: HRU2F (BER=10 )
Maximum RSL (dBm) QPSK-256 QAM: -20; 512 QAM-2048 QAM: -23; 4096QAM: -25 @
BER <10-6.
Figure 7-1 Relation Between RSL and Output Voltage of RSSI Interface
Note
Ethernet throughput is tested according to RFC2544 (frame size: 1518 bytes to 64
bytes) and header compression function is disabled while testing.
The actual throughput of each channel spacing and modulation scheme relates to
the average packet size.
The system transmission capacity is frequency independence.
13.75/27.5/55/110 MHz is applied for 18 GHz.
112 MHz is available for 13/15/18/23GHz.
Figure 7-1 Relation Between RSL and Output Voltage of RSSI Interface. 7-22
I
Tables
Table 1-1 Function List................................................................................ 1-3
Table 7-13 Transmitter Power & ATPC Range - SRU Part 1: 6 GHz -15
GHz.............................................................................................................. 7-9
Table 7-14 Transmitter Power & ATPC Range - SRU Part 2: 18 GHz -42
GHz............................................................................................................ 7-10
Table 7-15 Transmitter Power & ATPC Range - SRU2 Part 1: 13 GHz/ 15
GHz............................................................................................................ 7-12
Table 7-16 Transmitter Power & ATPC Range - SRU2 Part 1: 18 GHz/ 23
GHz............................................................................................................ 7-12
II
Table 7-17 Transmitter Power & ATPC Range - SRU2 Part 1: 26 GHz/ 38
GHz............................................................................................................ 7-13
Table 7-18 Transmitter Power & ATPC Range - HRU v1.3/v2.0............... 7-14
III
Glossary
ACM
API
ATPC
CFM
CLI
CPU
DBS
- Database System
DC
- Direct Current
DSCP
EMS
ETM
GE
- Gigabit Ethernet
IV
HTTP
HTTPS
IEEE
IF
- intermediate Frequency
IP
- Internet Protocol
ITU-T
LAN
LLDP
LMT
MIB
MIMO
- Multiple-Input Multiple-Output
MTBF
MTTR
V
NMS
OAM
ODU
- Outdoor Unit
PC
- Personal Computer
POE
PSE
QoS
- Quality of Service
RBER
RF
- Radio Frequency
SNMP
TDM
TRX
- Transceiver
VLAN
VI
WEB
- Web
XPIC
VII