Make:
How | Built a Raspberry Pi Tablet
By Michael Castor Posted January 7th, 2014 3:14 pm Category CNC Machining,
Computers & Mobile, Machining, Raspberry Pi 14 Comments
360 view of my DIY PiPad Raspberry Pi tablet.
It seems that every day a manufacturer comes out with a new tablet computer.
Thinner, lighter, faster, but it seems that they alll look about the same and
accomplish roughly the same things. When | set out to build my Raspberry Pi
tablet | wanted something different. | wanted an all-in-one system that was usable,portable, and Linux based. Additionally, it had to look good. Since | wanted to use
it on flights the device couldn't freak out the TSA or the old lady sitting next to
me.
My custom PiPad tablet.
Early in 2013 | started accumulating parts. The Raspberry Pi runs off of SV so!
knew it could be powered from a cell phone charger. Most touchscreens | could
find were 12V though, making the electrical work more complex. After a bit of
searching | finally found what | was looking for: a touchscreen monitor with a 5V
HDMI to LVDS converter from a site called Chalk-Elec.com. | plugged the screen
in as soon as | received it and to my delight it worked perfectly with the Pi, even
the capacitive touchscreen. Now I knew my dream of a Raspberry Pi tablet was
possible
According to Parkinson's Law, “Work expands so as to fill the time available for its
completion.” Thus was the case for my Pi tablet. Two weeks before Maker Faire
Bay Area | was helping a guy in the Shed Tech Support queue that needed some
help with his Maker Faire project. Helping him got my creative juices flowing and |
decided | wanted a Maker Faire project too. Crazy — right? | had all the parts and
now | had an ambitious deadline that couldn't allow for expansion. Fortunately |
had started some preliminary design work so | *kind of* knew what | was goingfor. | happened to have access to a CNC machine, some 1/2” Baltic birch
plywood, and a relatively large sheet of scrap carbon fiber laying around to form
the basis of the frame.
Cut files were created in Vectric's Aspire. Components were scanned and
traced for fitment.
The files were cut on my CNC machine.Due to time constraints and cut path layer confusion, | used a hobby knife.
to cut the frame.Cutting access ports in the frame with a hobby knife.Cutting through layers of plywood.
Test fitting.Trying on the top cover.A bit from the top of the frame has to be cut out too.
It fits!Cutting in the rest of the components.Frame with all cuts complete.
Looking good on this side.This side looks good too.I later found out this was far too much foam tape.
Measuring for the SD card slot.Clearing out the SD card slot with a coping saw.
=
Smoothing out the SD slot with a strip of sand paper.Everything fits nicely!
—Almost ready for the top frame.
It took a bit of sanding to get the LCD to fit correctly.Everything fits! Time to stain.
All hardware was removed for finishing.Anice bead of glue.
Final component installation. Notice the missing Ethernet and USB port?The completed setup running RaspBMC (the touchscreen driver doesn't
work in RaspBMC.)
View Al
(Full parts listing and design files can be found here.)
After several 4am nights | completed the Raspberry Pi tablet (aka, PiPad) the day
before my flight. The build wasn’t without its issues (| had to remove one USB port
and the Ethernet jack due to clearance problems.), but everything worked and I
was happy with the results. But what about the TSA?My PiPad caught the attention of the flight attendant, but only because she liked the
movie | was watching.
This image was taken while on my flight to San Francisco. It didn’t raise an
eyebrow going through security. On the plane though, a flight attendant kept
walking by looking closely at the home-built gadget | had on my lap. At one point |
could feel her looking over my shoulder and was sure she was going to say
something. She nudged me (| thought it was over at this point) and said, “I love
that movie — you're coming up to the best part!” It turns out that she’d been
catching glimpses of “Talladega Nights” that | had playing using RaspBMC. I've
taken the PiPad on most flights since and no one has said a word.Eben Upton signed the carbon fiber back of my PiPad!
I'd e-mailed Raspberry Pi Foundation founder Eben Upton a few times for work,
but didn’t have the chance to meet him at Maker Faire Bay Area. | finally
managed to catch up with him at Maker Faire New York though. Eben is probably
the most humble, down to earth person I've ever met. | really can’t say enough
about him. After a long chat | showed him the PiPad. He gave it several
compliments and after a few minutes of playing with it, he graciously signed the
back at my request. His signature looks amazing on the carbon fiber!
Overall I'm very happy with my Raspberry Pi tablet. It does what | want it to do
and has been a great way to demonstrate the capabilities of the Raspberry Pi at
Maker Faires. (Perhaps you noticed it?) The 10,000mAh battery provides a usable
six hours of run-time and the device gets constant compliments from makers.
(Including Bunnie Huang}) | do wish | would have used a battery that provides
power while plugged in. Other changes I'd make would be mostly software
related. It's difficult to double-click on icons reliably and the N-Trig touch driver
isn’t supported by RaspBMC, (but can be compiled into the kernel if | could ever
get it figured out). I've also considered adding a camera and an IR sensor... maybe
if | build another one