NELSON
NELSON STUD WELDING Jv and: cl
SPECIFICATION: 831, Shear Connectors (SC) Cheek Standard Stock
"Nelson headed shear connectors deliver code specified shear strength values S3L
2 used in composite construction, securing conerete to steel structural Hy
‘components. Nelson shear connectors meet requirements of the following 4
codes and are also USNRC approved:
AWS D1.I Structural Welding Code ~ Steel
AWS DI-6 Structural Welding Code ~ Stainless Stel
AWS DI.5 Bridge Welding Code /
‘AASHTO Standard Specification for Highway Bridges ° Leagth
180-13918 welding ~ Studs for are stud welding
Canadian Standards Association W59~ Welded Stee! Construction
Intemational Building Code Section 19
AISC Manual of Steel Construction ~ Allowable Stress Design)
AISC Manual of Stee! Construction — Load & Resistance Factor Design
See also: ICBO Evaluation Report ER-2614 Nelson Shear Connectors
‘Shear connectors are typically used in composite steel construction for holding conerete slabs to steel members to resist
shear forces and increase shear loading capacity in stel buildings, bridges, columns caissons, containment liners, ete
‘They also act as embedment anchors on miscellaneous embedded plates, frames, angles, strip plates, attachments and
eonnections. Options for Welding Through Metal Deck are availabe for this stud,
For similar function studs, see Nelson I141, Hesded Conerote Anchors and D2L. Deformed Bae Anchors.
‘When ordering, specify Type, Diameter, Length, Material, Quantity, and Part Number
Bs 0,
:xample: SSL 3/4 x 6-3/16"; Mild Stet; 10,000 pieees; #101098015
So Pn Su 0 HSS
sda’ | S287 | osrs [4250 | sooooroes | sozooz042 | soxo06ozr | rooiorss2
zen | 3i87 [oars | 4.375 | soocoroe: | soz0ozoa | sotoo0028” | sooinraao
2émm | 3a5° | soo | 1.625 | soooo1aza | soz002082 | soroosoe wooro1065
"Burn OFF Bn of lengths shows ae Tr welding bare se. For barn of vlan ber dtl whan Hadras welc
"ough met deck ose see WELD THROUGH DECK SPECIFICATION SHEET
‘The Nelson Ferrule Shooter is available for semi-automatic dispensing of ceramic ferrules along with standard
ferrules assembled 50 pieces per “string” for easy and fast loading onto the Fetrule Shooter dispenser. Following are
the current ferrute assemblies available:
‘Stud diameter Fernie
i Gonna ToOT0Tzeb
[TE weld rough c6ek_| 10070240
7 ownhand “ooi0%26t
THE wels ough aeek | 100107262
MATERIALS: Studs are available in Low Carbon Mild Steel and 3161 Stainless Stcel. For specific grade information
and physical and chemical properties, conforming standards, and information on stud plating and heat treating, please
see General Matetial Specifications, Certified Material Test Reports (CMTR) and Certfieates of Compliance (COC)
are available and must be requested at time of order,
For ferrules and grips used in welding at an angle to plate, welding to angles, and wel
the Special Applications section of the Feirule Sisecifieations
1g toa vertical base plate, see
FLUX: All Nelson conerete anchors have a solid flux load,
Visit our website www.NelsonStuudWelding.com for list of our standard stock products
Nelson Stad Welding loc PH 1-800.NEL-WeLD E-mall: Nelson Sctacgpveteonstid com
‘7800 West Ridge Road 1-800-535-9555
yea, Ono #4085.