Professional Documents
Culture Documents
Contents
Course Description .............................................................................................................................. 1
Course Introduction ..................................................................................................................... 1
Objectives ................................................................................................................................... 1
References................................................................................................................................... 1
Chapter 1 Preparations ........................................................................................................................2
1.1 Configuration Networking ......................................................................................................2
1.2 General Data Configuration Flow ........................................................................................... 3
Chapter 2 Querying the Local Office Data ........................................................................................... 5
2.1 Task Scenario ......................................................................................................................... 5
2.2 Operation Steps ..................................................................................................................... 5
Chapter 3 Querying the Interworking Data between MRFC and other NEs ........................................ 10
3.1 Task Scenario ....................................................................................................................... 10
3.2 Operation Steps ................................................................................................................... 11
Chapter 4 Querying the MRFP Local Office Data ............................................................................... 16
4.1 Task Scenario ....................................................................................................................... 17
4.2 Operation Steps ................................................................................................................... 17
Chapter 5 Querying the Interworking Data between MRFP and other NEs ........................................20
5.1 Task Scenario .......................................................................................................................20
5.2 Operation Steps ...................................................................................................................20
Chapter 6 MRFC&MRFP Operation and Maintenance ....................................................................... 25
6.1 Task Scenario ....................................................................................................................... 25
6.2 Task1 MRFP Routine Operation Commands ........................................................................ 25
6.3 Task2 MRFC Tracing Tool Operation .................................................................................... 30
6.4 Task3: Check the tone file name transfer in the message ..................................................... 32
Chapter 7 Interworking Data Configuration between MRFC and other NEs (Optional) ...................... 33
7.1 Task Scenario ....................................................................................................................... 33
7.2 Key Parameter Data Plan ..................................................................................................... 34
7.3 Task Preparation .................................................................................................................. 35
7.4 Data Configuration Operation Steps .................................................................................... 35
7.5 Data Configuration Validate ................................................................................................. 38
Chapter 8 Interworking Data Configuration between MRFP and MRFC (Optional) ............................40
8.1 Task Scenario .......................................................................................................................40
8.2 Key Parameter Data Plan .....................................................................................................40
8.3 Task Preparation .................................................................................................................. 43
8.4 Data Configuration Operation Steps ....................................................................................44
8.5 Data Configuration Validate................................................................................................. 53
i
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
ii
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
Course Description
Course Introduction
This course is applicable to product version IMS V500R021C00.
As the Huawei MRFC&MRFP hands-on guide, this course consists of four parts:
guide to configuring the MRFC&MRFP hardware data and local office data, guide
to configuring the MRFC&MRFP interconnection data, guide to configuring the
MRFC&MRFP service feature data, and guide to operating and maintaining the
MRFC&MRFP.
Objectives
After completing this course, you will be able to:
Describe how to configure MRFC&MRFP data.
Understand and configure the key command parameters by configuring or
querying MRFC&MRFP hardware data, local office data, interconnection
data, and feature data.
Properly interconnect MRFC&MRFP and other NEs by configuring
MRFC&MRFP interconnection data.
Complete the feature functions by configuring MRFC&MRFP feature data.
References
OZC075101 MRFC System Introduction and Data Configuration ISSUE9.00
OZC085201 MRP6600 Data Configuration ISSUE9.00
1
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
Chapter 1 Preparations
AS
S-CSCF
MRFC
OMS Mp NFS
H.248
NM NFS
MRFP
Mb Mb
SIP Multimedia RTP UMG
phone RTP
No. Procedure
Result:
Run LST ME to check the MRFC data on CGP. (notes: MRFC is embedded in CSCF)
Result:
Domain ID Subnet ID ME ID
6 Task: Log in to the MML command interface of the OMU client and select the CSCF.
Result:
Result:
Result:
No. Procedure
1 Task: Log in to the MML command interface of the OMU client and select the CSCF.
Result:
2 Run LST MHTTPS to query the configuration of a peer HTTP device for the MRFC on CSCF of
OMU LMT.
Result:
Result:
Host name
4 Run LST H248LNK to query the information of H.248 link data on CSCF.
Result:
5 Run LST MRFPRES to query the resource types and resource quantities supported by an MRFP on
CSCF.
Result:
O&M #243
%%LST MRFPRES:;%%
RETCODE = 0 Operation succeeded
= PDC_EFR
= UMTS_AMRWB
= GSM
= AMR
= AMR-WB
= iLBC
= EVRC
= EVRC0
= EVRCB
= EVRCB0
= EVS
Video codec list = H261
= H263
= H264
= MPEG4
2833 capability = Basic Capability2833
Media address type = ANY
Multistream Video capability = No
(Number of results = 1)
--- END
No. Procedure
1 Task: Log in to the MML command interface of the OMU client and select the CGP.
Result:
ME ID ME TYPE ME version
3 Log in to the MML command interface of the OMU client and select the MRP6600.
Result:
7 Run LST LANGTYPE to query the mappings between language type strings and language types.
Result:
IPv4 address IPv4 gateway IPv6 address IPv6 prefix IPv6 gateway
mask length
No. Procedure
1 Task: Log in to the MML command interface of the OMU client and select the MRP6600.
IPv4 address IPv4 gateway IPv6 address IPv6 prefix IPv6 gateway
mask length
3 Run LST VMRFP to query the information about the virtual MRFP.
Result:
Local port Peer Master Peer port PPU Module No. H248 signaling
No. address No. link No.
No. Procedure
1 Task: Log in to the MML command interface of the OMU client and select the
MRP6600.
25
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
Used by VQE
26
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
Result:
27
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
View the result and check whether the bearer status is normal.
28
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
Freed context
8 Run DSP ESN to query the device ESN. The ESN is required to obtain a license file.
Check whether the command output has Raw ESN and ESN.
9 Run DSP LICENSE to query the information about license file status on the OMU and
the host.
Check whether the License file name contains records in the command output.
Confirm that the running phase is normal.
29
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
1 Create an MRFC SIP message trace task in the CSCF signaling trace tool. The traced IP
address is the IP address of the MRFC. This IP address can be obtained by running LST
MADDR on the CSCF operation interface. This IP address is optional. The following
figure shows the SIP message trace selection.
After get the tracing message, then you check the message content and find the media
stream control related parameter.
30
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
2 Create an MRFC H248 message trace task in the CSCF signaling trace tool. The traced
media gateway flag is the flag of the MRFP. This flag can be obtained by running LST
MGW on the CSCF operation interface. The following figure shows the H248 message
trace selection.
To trace the signaling between the MRFP whose media gateway flag is 0 and the MRFC,
set the information as shown in the following figure:
After get the tracing message, and then check the message content and find the media
stream related parameter.
31
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
6.4 Task3: Check the tone file name transfer in the message
i. Implement a service in which the MRFC/MRFP is involved
ATS: Do not disturb, for instance
Other AS (simulator): Your instructor will help you to configure the simulated AS
ii. Make a service call (Do not disturb) then trace the session in SIP interface
of MRFC, and then check the tone file name in the INFO message from the
AS to the MRFC.
What is the tone file name? Where is it contained in?
For instance:
iii. Make a service call (Wrong Number) then trace the session in H248
interface of MRFC, and then check the related MOD_REQ message in the
H248 message
What is the tone file name? Where is it ?
For instance:
32
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
MR
FP
191.1.8.9
/16
MR
FC
IP
191.1.8.8 Networ
/16 A
T
191.1.8.10
/16
Items Configuration Commands Function
33
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
34
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
Then make sure date configuration of MRFC address have been completed.
Task: Run ADD AS to specify a peer AS device for an MRFC. ADD MHTTPS
Enter the corresponding key parameters in the following table
according to the planned parameter table.
ADD MGW
AS name
35
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
Domain name
Configuration script:
ADD MHTTPS: LNKNAME="mlink1", ADDRN="MADDR0",
HTTPN="server1", IPT=IPV4, IP="172.25.200.126", LPT=19500,
PPT=1951, BSUMID=8, HTTPTYPE=HTTPS,
LNKTYPE=Persistent, CAFN="cacrt.pem",
CERFN="clientcert.pem", CERKEYFN="clientkey.pem",
CERKEYPWD=******;
36
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
Entity Type
ADD MHTTPS
MGW name
Transport protocol
ADD MGW
MGW type
ADD H248LNK
ADD MRFPRES
Configuration script:
ADD MGW: EN="entity1", DN="huawei.com",
HN="host.huawei.com";
MGW name
ADD MHTTPS
Transport protocol
Link name
ADD MGW
BSU module number
Local IP address 1
ADD H248LNK
Local port number
Remote IP address 1
ADD MRFPRES
Remote port number
Configuration script:
37
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
No. Procedure
1 Task: Log in to the MML command interface of the OMU client and select the CSCF.
Task: Run DSP H248LNK to add query the status of the H.248 links of a specified MGW
(such as the UMG/SBC/MRFP).
Result:
38
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
39
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
MRFP
191.1.8.9 /16
MRFC
IP Network
191.1.8.8 /16
ATS
191.1.8.10 /16
Configuration
Items Function
Commands
40
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
1. The group id is consist with the example value, for instant AS ID is 0-5, and your group is 1,
then your example value is 0. If your group is 6, then your example value is 5.
2. The commands from ADD ETHIF to ADD MEDADDR only configure by one group. Other
groups cannot be configured.
MRP_SIG_IF
Interface name
MRP_MED_IF
ADD DETECTIP
192.168.1.13
IPv4 address
10.10.1.7
41
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
SIG_BFD_Standby
Session name
MED_BFD_Active
MED_BFD_Standby
192.168.1.12
ADD BFDSESSION
192.168.1.13
Local IPv4 address
10.10.1.6
10.10.1.7
192.168.1.50
Peer IPv4 address
10.10.1.49
SIG_BFD_Active
SIG_BFD_Standby
ADD IPHABFDBD Session name
MED_BFD_Active
MED_BFD_Standby
MRP_SIG_IF
Interface name
MRP_MED_IF
192.168.1.12
Local active probe IPv4 address
10.10.1.6
ADD ARPPRB 192.168.1.50
Peer gateway IPv4 address
10.10.1.49
192.168.1.14
Local standby probe IPv4
address
10.10.1.8
Probe type GWPRB(Gateway probe)
Virtual MRFP name VMRFP 0-5
Virtual MRFP MID type IP
42
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
43
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
Then make sure date configuration of MRFP local office data have been completed.
Configuration script:
SET BFD
ADD ETHIF: VMNAME="MRPHRUS_0_1",
PORTNAME=VNIC2, IFNAME="MRP_SIG_IF";
ADD ETHIF: VMNAME="MRPHRUS_0_1", ADD
PORTNAME=VNIC3, IFNAME="MRP_MED_IF"; DETECTIP
ADD
BFDSESSION
ADD
IPHABFDBD
ADD ARPPRB
ADD VMRFP
ADD MRFC
ADD H248LNK
44
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
ACT VMRFP
2 Run ADD SIGADDR to add H.248 signaling IP addresses. ADD ETHIF
Enter the corresponding key parameters in the following table
according to the planned parameter table. (this command can only
configure by one group) ADD SIGADDR
Result:
IPv4 address
ADD
IPv4 address mask DETECTIP
IPv4 gateway
ADD
BFDSESSION
Configuration script:
ADD SIGADDR: ADDRNAME="IP_Addr_01", HRUMID=451, ADD
IFNAME="MRP_SIG_IF", IPTYPE=IPV4,
IPHABFDBD
IPADDRESSV4="192.168.1.12", MASK="255.255.255.128",
IPV4GW="192.168.1.1";
ADD ARPPRB
ADD VMRFP
ADD MRFC
ADD H248LNK
ACT VMRFP
3 Run ADD MEDADDR to add media address for a specified ADD ETHIF
external network interface.
Enter the corresponding key parameters in the following table
according to the planned parameter table. (this command can only ADD SIGADDR
configure by one group)
45
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
ADD ARPPRB
ADD VMRFP
ADD MRFC
ADD H248LNK
ACT VMRFP
4 Run SET BFD to enable or disable the Bidirectional Forwarding ADD ETHIF
Detection (BFD) function.
Enter the corresponding key parameters in the following table
according to the planned parameter table. ADD SIGADDR
Enable the IPv4 BFD function
Enable the IPv6 BFD function
ADD MEDADDR
Session waiting restoration
duration(s)
Configuration script:
SET BFD: BFD=YES; SET BFD
ADD
DETECTIP
ADD
BFDSESSION
ADD 46
Confidential Information of Huawei. No Spreading without PermissionIPHABFDBD
MRFC&MRFP Practice Guide ISSUE9.00
ADD ARPPRB
ADD VMRFP
ADD MRFC
ADD H248LNK
ACT VMRFP
5 Run ADD DETECTIP to enable or disable the Bidirectional ADD ETHIF
Forwarding Detection (BFD) function.
Enter the corresponding key parameters in the following table
according to the planned parameter table. ADD SIGADDR
Interface name
IP type
ADD MEDADDR
IPv4 address
Mask
IPv4 Gateway SET BFD
IPv6 address
Prefix length
ADD
IPv6 Gateway DETECTIP
Configuration script:
ADD
ADD DETECTIP: IFNAME="MRP_SIG_IF",
IP="192.168.1.13", MSK="255.255.255.0"; BFDSESSION
ADD ARPPRB
ADD VMRFP
ADD MRFC
47
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
ADD H248LNK
ACT VMRFP
6 Run ADD BFDSESSION to add a data record for a Bidirectional ADD ETHIF
Forwarding Detection (BFD) session.
Enter the corresponding key parameters in the following table
according to the planned parameter table. ADD SIGADDR
Session name
IP type
ADD MEDADDR
Local IPv4 address
Peer IPv4 address
Local IPv6 address
SET BFD
Peer IPv6 address
Interface name
ADD
Detection time multiplier
DETECTIP
Min TX interval(ms)
ADD
Min RX interval(ms)
BFDSESSION
Check packet loss rate in a
period ADD
Probe failure threshold in a IPHABFDBD
period (%)
ADD ARPPRB
Probe times in a period
Description
Configuration script: ADD VMRFP
ADD BFDSESSION: BFDSESSION="SIG_BFD_Active",
IPTYPE=IPV4, LIPV4="192.168.1.12", ADD MRFC
PIPV4="192.168.1.50";
ADD BFDSESSION: BFDSESSION="SIG_BFD_Standby",
ADD H248LNK
IPTYPE=IPV4, LIPV4="192.168.1.13",
PIPV4="192.168.1.50";
ADD BFDSESSION: BFDSESSION="MED_BFD_Active", ACT VMRFP
IPTYPE=IPV4, LIPV4="10.10.1.6", PIPV4="10.10.1.49";
ADD BFDSESSION:
BFDSESSION="MED_BFD_Standby", IPTYPE=IPV4,
LIPV4="10.10.1.7", PIPV4="10.10.1.49";
7 Run ADD IPHABFDBD to configure a Bidirectional Forwarding ADD ETHIF
Detection (BFD) session for the active/standby arbitration
48
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
Session name
Configuration script:
ADD MEDADDR
ADD IPHABFDBD: BFDSESSION="SIG_BFD_Active";
ADD IPHABFDBD: BFDSESSION="SIG_BFD_Standby";
ADD IPHABFDBD: BFDSESSION="MED_BFD_Active"; SET BFD
ADD IPHABFDBD: BFDSESSION="MED_BFD_Standby";
ADD DETECTIP
ADD BFDSESSION
ADD
IPHABFDBD
ADD ARPPRB
ADD VMRFP
ADD MRFC
ADD H248LNK
ACT VMRFP
8 Run ADD ARPPRB to configure the virtual MRFP. ADD ETHIF
Enter the corresponding key parameters in the following table
according to the planned parameter table.
ADD SIGADDR
Interface name
Local active probe IPv4
address
ADD MEDADDR
Peer gateway IPv4 address
Probe type
Local standby probe IPv4
SET BFD
address
49
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
ACT VMRFP
9 Run ADD VMRFP to send ARP probes maps to a maximum of ADD ETHIF
100 IPv4 addresses of the peer end.
Enter the corresponding key parameters in the following table
according to the planned parameter table. ADD SIGADDR
Virtual MRFP Name
Virtual MRFP MID type
ADD MEDADDR
Virtual MRFP MID
Configuration script:
ADD VMRFP: VMRFPNM="VMRFP1", MIDTYPE=IP, SET BFD
MID="192.168.1.12:2945", MMGCDFLAG=NO;
ADD DETECTIP
ADD BFDSESSION
ADD IPHABFDBD
ADD ARPPRB
50
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
ADD VMRFP
ADD MRFC
ADD H248LNK
ACT VMRFP
10 Run ADD MRFC to add an MRFC data record. ADD ETHIF
Enter the corresponding key parameters in the following table
according to the planned parameter table.
ADD SIGADDR
Virtual MRFP name
MRFC name
MRFC MID type ADD MEDADDR
MRFC MID
Master/Slave flag
SET BFD
Configuration script:
ADD MRFC: VMRFPNM="VMRFP1", MRFCNM="MRFC1",
MIDTYPE=IP, MID="192.168.1.11:2945", MSS=MASTER;
ADD DETECTIP
ADD BFDSESSION
ADD IPHABFDBD
ADD ARPPRB
ADD VMRFP
ADD MRFC
ADD H248LNK
ACT VMRFP
51
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
ADD MEDADDR
Configuration script:
ACT VMRFP: VMRFPNM="VMRFP1"; SET BFD
52
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
ADD DETECTIP
ADD BFDSESSION
ADD IPHABFDBD
ADD ARPPRB
ADD VMRFP
ADD MRFC
ADD H248LNK
ACT VMRFP
No. Procedure
1 Task: Log in to the MML command interface of the OMU client and select the MRFP.
2 Run DSP VMRFP to display the major information about a virtual MRFP, including:
Status of the virtual MRFP: un-registered, waiting for link establishment, waiting for
disconnection, waiting for registration, in service, and out of service
MRFC currently selected by the virtual MRFP
Result:(check the Run State of the VMRFP normal or not)
53
Confidential Information of Huawei. No Spreading without Permission
MRFC&MRFP Practice Guide ISSUE9.00
3 Run DSP H248LNK to query the status information of a specified H.248 signaling link.
Result:(check the Run State of Link normal or not)
54
Confidential Information of Huawei. No Spreading without Permission