Professional Documents
Culture Documents
Oil & Gas, Supply of Electrical, Mechanical, Civil, Agents, Procurement, Fire Equipment, Hiring of Equipment, Inspection &
Certification of Lifting Equipment, Maintenance & General Contractors…
RC NO: 1259577
S/N Job Step Hazard/ Hazard CAUSE Consequences Potential Existing Recommended Controls Residual Action
Source Risk Barrier / Risk party
Sequence of working The potential to (Possible causes (The harm
Control
activities/Equipment cause harm that will which could H/M/L H/M/L
Describe all
required (Health, Injury, potentially possibly (With no (with
existing barriers
Property damage, release a occur). controls controls in
/ controls for
environment etc) hazard) in place place
each hazard
1 Working with Electrocution Broken Fatality H Inspection of Check all cables prior L
electricity cables, worn Personal equipment and to start of work to
out cables, Injury accessories prior ensure proper
Electromagnetic improper Burns condition
to work
yoke/permanent plugs used Check for no breaks in
magnetic yoke Ensure insulation
equipment is Do not apply
calibrated and insulation to damaged
certificate cables.
attached Replace damaged
cables
4 Cleaning of weld Physical damage pinch point M Ensure that all Ensure to wear proper L
joints (power protruding PPE while cleaning the
Hand injury
brush) welds/sharp weld joint with power
edges shall be
removed brush/wire brush
Use of
recommended
PPE