Professional Documents
Culture Documents
Labconco Filtered Fume Hoods Enclosures Catalog
Labconco Filtered Fume Hoods Enclosures Catalog
The patented* Protector ClassMate Laboratory Hoods are students using the hood. The clear back does not obstruct visibility
designed to meet the needs of instructional laboratories. Clear when hoods are placed back-to-back in an island configuration.
back and sides and taller front viewing window provide enhanced Protector ClassMate Hoods are offered in 4', 5' and 6' widths.
visibility for conducting chemistry demonstrations or observing Models with combination sashes are also available.
Durable and attractive By-pass airflow design Performance tested to Front panel may be easily Streamlined corner posts
frame is glacier white ensures relatively stable face ASHRAE 110. removed for lamp replace- provide maximum visibility
powder-coated steel velocities. ment and access to electrical and working area.
and aluminum. supply connections.
Static viewing panel above
Energy-efficient, rapid-start the sash frame creates a
fluorescent lighting is located 39" viewing height, permit-
behind a laminated safety ting the hood to be mounted
glass shield and outside the in a low or high position to
hood interior for corrosion- accommodate persons of dif-
resistance and easy replace- ferent heights and still maintain
ment. Contact Labconco the same visual accessibility.
for ordering information on
Anti-racking vertical-rising
explosion-proof lighting.
sash for smooth operation
may be raised from closed to
Ergonomic 5° angled sash 29" fully open height from the
and panel allow closer, more work surface for loading and
comfortable viewing, without cleaning. A sash stop limits
glare. the working height to 18" to
help conserve energy. Exhaust
volume and blower sizing are
Clear, tempered safety glass based on the 18" height. When
sash, viewing panel, sides, raised, the sash does not
back and baffle provide extend above the fume hood.
maximum visibility. All glass
components except vertical- Combination horizontal
rising sashes are removable sliding/vertical-rising sashes
for cleaning. Laminated safety are provided on
glass and solid composite some models.
sides and back are also avail- Two sets of inte-
able. Contact Labconco for gral sash stops
ordering information. prevent raising
the vertical sash
Color-coded service fixtures above the half-
for gas, air, water, vacuum open (15") and fully-closed
and other services have positions unless manually
remote controls for use defeated by the operator.
regardless of sash position.
Four service fixtures are pre- Pre-wired electrical compo-
plumbed on fixtured models. nents. Fluorescent lights and
Each hood is factory prepared switches are factory-wired
for up to 8 service fixtures to the hood’s junction boxes.
(four controlled from the front Two electrical duplex recep-
of the hood and four from the tacles are factory-wired on
base cabinet). fixtured models.
2
Protector ClassMate Laboratory Hoods
® ®
Total Exhaust CFM and Static Pressure Total Exhaust CFM and Static Pressure at 50%
at 18" sash opening height (60% open)* sash opening height horizontally or vertically
Catalog Number 100 fpm S.P. 80 fpm S.P. 60 fpm S.P. Catalog Number 100 fpm S.P. 80 fpm S.P. 60 fpm S.P.
S15387, S15388 570 0.24" 460 0.16" 340 0.09" 6971400, 6971401 470 0.16" 380 0.11" 280 0.06"
S15389, S15390 730 0.39" 590 0.26" 440 0.14" 6971500, 6971501 550 0.22" 440 0.14" 330 0.08"
S15391, S15392 890 0.51" 710 0.33" 540 0.19" 6971600, 6971601 680 0.30" 550 0.20" 410 0.11"
*Contact Labconco for other sash opening height data.
(All Models)
4
Accessories
Protector ClassMate ® Laboratory Hoods
®
5
Basic 47 Laboratory Hood with built-in blower S51259MF is shown with Flat
Requires
Ductwork and Solid Epoxy Work Surface S28132 and Protector Acid Storage Cabinet 9901000.
Blower
Inset: Basic 70 Laboratory Hood S28127 is shown with Flat Solid Epoxy Requires
Work Surface S28133 and two Protector Standard Storage Cabinets 9900100. Ductwork
Basic Laboratory Hoods
™
Basic 47 and 70 Laboratory Hoods are designed for modular Constructed of powder-coated steel, Basic Hoods are economi-
laboratories, classrooms and light duty applications where safe cal and have a smaller overall height and depth than traditional
ventilation is required. hoods so they fit in areas with low ceilings or narrow aisles.
Choose from 4' and 6' widths.
Front panel may be removed Versatile blower mounts on CE mark*. Contact Labconco Two-piece baffle is adjustable.
for access to blower and elec- top of the hood liner or in a for specific 230 volt, 50 Hz
trical connections. remote location. Hoods are also models that conform to CE
available without blower. (European Community) require- The right side fixture panel is
ments for electrical safety and factory-prepared for up to three
Durable and attractive electromagnetic compatibility. color-coded service fixtures, one
exterior is glacier white duplex electrical receptacle and
powder-coated steel. an airflow monitor.
Vapor-proof incandescent
lighting illuminates the
interior. Explosion-proof
models include an explosion-
proof incandescent light fixture
(bulb not included).
Vertical-rising tempered
safety glass sash protects
the operator while providing
excellent visibility.
Unassembled models
available. Components fit into
a carton less than one half its
assembled size. The compact
The right interior wall is Durable powder-coated Pre-wired electrical compo-
container is more economical to
factory-prepared to accom- 16 gauge steel liner resists nents. Incandescent lighting
ship and store than assembled
modate an accessory cupsink chemical degradation. and switches are factory-wired
hood cartons and transports
and turret (sold separately). to the hood’s junction box.
readily to remote locations.
Explosion-proof models are
Assembly is simple and fast.
furnished without switches
Unassembled models are
Compact dimensions accom- and wiring as these must
not pre-wired.
modate tight installations. conform to varying local
The 48" height, 53" with built- codes.
in blower, makes it ideal for
Performance tested to
laboratories with lower ceiling * Contact Labconco for specific models.
ASHRAE 110.
heights. Overall depth of 25"
makes it adaptable to shallow Exclusive Feature
cabinetry.
7
Basic Laboratory Hoods
™
8
Ordering Information & Dimensional Data
Basic™ 47 Laboratory Hoods
53.0"
Ordering Information & Dimensional Data
Basic™ 70 Laboratory Hoods
Guardian™ Jr. Airflow Monitor Kits Guardian™ Digital Airflow Monitor Kits
Audible/visual alarm alerts user to low face velocity. An LCD displays average face velocity. Audible/visual
For installation in a factory-prepared cutout on upper alarm alerts user to low or high face velocity. For instal-
portion of right side fixture panel. Shipping weight 6 lbs. lation in a factory-prepared cutout on upper portion of
(3 kg) right side fixture panel. Shipping weight 6 lbs. (3 kg)
4852500 Cupsink and Turret Kit 4878600 Right Side Finish Panel Kit
Polypropylene cupsink, 3" x 6", and chrome Recommended. Includes a glacier white powder-coated steel panel to
turret mount on right side wall. Plumbing provide a finished appearance to the right side of the hood. The panel
pipe is not included. Shipping weight 0.5 lb. hides the exposed plumbing when service fixtures are installed. Not for
(0.2 kg) use with 4852500 Cupsink and Turret. Shipping weight 20 lbs. (9 kg)
8.5"
Blower Module Detail (21.6 cm) 14.5" (36.8 cm)
7.0"
9.9" (17.8 cm)
(25.1 cm) Blower Outlet 16.0"
10.3" (40.6 cm)
20.5" (26.2 cm)
(52.1 cm) OD
4.25"
(10.6 cm) Blower Inlet
10.9" 3.0" 14.5"
(27.6 cm) (7.6 cm) (36.8 cm)
ID FRONT SIDE
1.0" 23.0" (58.4 cm) FRONT SIDE
(2.5 cm) 26.0" (66.0 cm)
28.25" (71.8 cm)
TOP
TOP
11
Fiberglass 30 Laboratory Hoods
12
Accessories & Dimensional Data
Fiberglass 30 Laboratory Hoods
8.9"
8.9" 13.1"
13.1"
(22.7cm)
(22.7 cm)
Duplex Electrical Receptacle Kits 8.9"
(22.7 cm)
(33.1
(33.1 cm)
cm)
13.1"
(33.1 cm) 11.7"
8.2"
8.2" 11.7"
Each kit includes duplex electrical receptacle, wiring, junction box (20.9cm)
(20.9 cm)
8.2" (29.6
(29.6 cm)
11.7"cm) 3030000
(20.9 cm) (29.6 cm)
and receptacle cover plate. For mounting on the lower right side 6.7"
6.7"
(with Built-in Blower)
(17.0cm)
(17.0 cm)6.7"
IDID Motor
Motor
fixture panel. (17.0 Exhaust
Exhaust
cm) ID Motor
Collar
Collar
Exhaust
Collar
Catalog # Kit Shipping Wt. TOP
TOP
TOP
TOP
2834800 115 volts, 20 amps AC 4 lbs. (2 kg)
2834801 115 volts, 20 amps AC, GFCI 4 lbs. (2 kg)
48.0"
48.0"
(121.9
(121.9 cm)
48.0" cm) 11.6"
36.0" 11.6"
Standard Service Fixture Kits (121.9 cm) 36.0" (29.5
(29.5 cm)
cm)
11.6"
(91.4
(91.4 cm)
cm)
36.0" (29.5 cm)
Interior 2.5°
2.5°
Interior
(91.4 cm) 30.0"
30.0"
Each kit includes one remotely-controlled service fixture with 0.25" 28.0"
28.0"
(71.1
(71.1 cm)
20.0"(50.8
cm) 20.0" (50.8cm)
cm) Height
Height
Interior
Slope
Slope
2.5° (76.2
(76.2 cm)
30.0"cm)
28.0" SashOpening
Sash Opening 29.0"
29.0" Slope
diameter valve and tubing, color-coded fixture knob and color-coded cm) 20.0" (50.8 cm)
Viewing
Viewing
(71.1
Sash Opening
Height
(73.7
(73.7 cm)
29.0"cm)
22.7"
22.7"
(57.6
(57.6 cm)
cm)
(76.2 cm)
Height
Height
Viewing 25.0"(63.5
(63.5cm)
cm) 22.7"
hose connector. For mounting on the right side fixture panel. Shipping Height
25.0"
25.0"Inside
Inside
(63.5 cm)
(73.7 cm) Sash
Sash(57.6 Frame
Frame
cm)
totoBaffle
Sash Baffle
Frame
weight 4 lbs. (2 kg.) Inside
30.0"(76.2
30.0" (76.2cm)
cm) 30.2" to Baffle
30.2"(76.6
(76.6 cm)
cm)
30.0" (76.2 cm)
FRONT
FRONT
FRONT 30.2" (76.6 cm)
SIDE
SIDE
SIDE
FRONT SIDE
8.9"8.9" 13.2"
13.2"
Catalog # Kit Tubing Valve Knob/Connector Color (22.7
(22.7
8.9"
(22.7cm)cm)
cm) 13.2"
(33.5
(33.5
(33.5 cm)cm)
cm)
8.2"8.2"
8.2" 11.2" 3030001
(20.9 11.2"
S28139 Cold Water (CW) Copper Brass Green (20.9
(20.9 cm)cm)
cm) 11.2"
(28.5
(28.5
(28.5 cm)cm)
cm)
(with Built-in Blower)
6.7" 6.7"
S28136 Hot Water (HW) Copper Brass Red (17.0
(17.0
(17.0
6.7"
cm)cm)
cm) IDIDID Motor
Motor
Motor
Exhaust
Exhaust
Exhaust
S28138 Deionized/ Stainless Nickel-Plated/ White Collar
Collar
Collar
Distilled Water (DI) Steel Stainless Steel TOPTOP
TOP
TOP
S28140 Vacuum (VAC) Copper Brass Yellow Motor
Motor
Motor
S28142 Air (AIR) Copper Brass Orange
S28141 Gas (GAS) Brass Brass Blue 52.0"
52.0"
52.0"
(132.1
(132.1 cm)cm)
cm)
S28135 Nitrogen (NIT) Copper Brass Brown (132.1
36.0"
36.0" 11.6"11.6"
11.6"
36.0" (29.5(29.5
(29.5 cm)cm)
cm)
(91.4
(91.4
(91.4 cm)cm)
cm)
S28137 Argon (ARG) Copper Brass Gray 28.0" 48.0"
Interior
Interior
Interior
2.5°
2.5°2.5°
Slope 30.0"
30.0"
30.0"
28.0" 20.0" (50.8 48.0" Slope
28.0"
(71.1 20.0"
20.0" (50.8
(50.8 cm)cm)
cm) 48.0"
(121.9 cm) Height
Height
Height Slope (76.2
(76.2
(76.2 cm)cm)
cm)
S28134 Steam (STM) Copper Brass Black (71.1
(71.1 cm)cm) Sash
cm) Sash
Sash Opening
Opening
Opening
(121.9
(121.9cm)
cm) 29.0"
29.0"
29.0" 22.7"22.7"
Viewing
Viewing
Viewing 25.0" 22.7"
25.0" (57.6
Height
Height 25.0"
(63.5 (57.6
(57.6 cm)cm)
cm)
Height (63.5
(63.5 cm)cm)
cm)
Inside Sash
SashSash Frame
Frame
Frame
Inside
Inside toBaffle
Baffle
totoBaffle
30.0" (76.2cm)cm)
30.0"
30.0" (76.2
(76.2 cm) 30.2" (76.6 cm)cm)
30.2"
30.2" (76.6(76.6cm)
FRONT
FRONT SIDESIDE
FRONT
FRONT SIDE
SIDE
Guardian Digital Airflow Monitor Kits
™ 8.9"8.9"
(22.7(22.7
cm) cm)
8.9"
An LCD displays average face velocity. Audible/visual alarm alerts user (22.7 cm)
8.2"8.2"
(20.9(20.9
cm) cm)
8.2" 3030002 and 3030003
to low or high face velocity. For installation in a factory-prepared cutout on (20.9 cm)
(for use with Remote Blower)
upper portion of right side fixture panel. Shipping weight 6 lbs. (3 kg) 6.7"6.7"
(17.0(17.0
cm) cm)
6.7"
ID(17.0
Exhaust
ID cm)
Exhaust
CollarCollar
ID Exhaust
Collar
Catalog # Description
TOP TOP
TOP
9743201 Guardian Digital Airflow Monitor for 115 volt, 60 Hz operation TOP
Protector XVS Ventilation Stations provide an economical alterna- than traditional hoods. They have no switches, wiring or service
tive to traditional fume hoods. With their low profile and clear fixtures that add incremental costs.
sides, top and sash, Protector XVS Ventilation Stations are well Protector XVS Stations may be connected to a remote blower
suited for classroom and educational laboratory environments and exhausted to the outside. Alternatively, they may be connected
where supervision or demonstrations are required. They may also to the FilterMate Portable Exhauster(s), which uses a carbon filter(s),
be used as weighing stations, light duty fume hoods, solvent clean- a HEPA filter(s) or HEPA/carbon filter combination to remove
ing work bays, and veterinary pathology and cytology enclosures. fumes and vapors and/or hazardous particulates from the exhaust
With smaller working heights and available in widths from 2', XVS air without ducting.
Stations exhaust less tempered room air and conserve more energy
Tempered safety glass front Sturdy glacier white and gray Upper dilution air supply Patented* rear baffle with
sash, sides and top offer powder-coated aluminum introduces room air at the top of zones of perforations promotes
excellent visibility, ambient light frame and steel rear plenum the sash to dilute contaminants horizontal laminar airflow to
and protection. Glass provides and baffle dissipate static in the upper chamber and maximize containment. The
better fire, scratch and chemical charge and provide durability bathes the back of the sash baffle pivots down and is easily
resistance than acrylic and dis- and better chemical resistance with clean air. removable for cleaning.
sipates static charge. compared to acrylic models.
No plastic-to-plastic bonding
is used. Ergonomic angled sash allows
a closer view, reduces glare and
provides a more comfortable
operating position than vertical
sashes.
15
Protector XVS Ventilation Stations
® ™
Requires
Ductwork and
Blower
• Modified ASHRAE 110-1995 conformity 8 Feet Tall 12" 775 0.42" 620 0.27" 465 0.15"
†
as low as 50 fpm independently verified * * Static pressure when one center exhaust opening is used.
by ECT, Inc.†† †
Static pressure when two outer exhaust openings are used. Requires “T” Connector 3981600, not included. Contact Labconco.
††
Contact Labconco for more information.
Nominal Catalog Overall Overall (A) (B) (C) (D) (F) (G) (I) (J) (K) Ship. Wt.
Width Number Height (E) Depth (H) in./cm in./cm in./cm in./cm in./cm in./cm in./cm in./cm in./cm lbs./kg
in./cm in./cm
2 Feet 4862010 22.8/57.9 29.0/73.7 24.0/61.0 12.0/30.5 21.6/54.9 28.6/72.6 22.3/56.6 19.0/48.3 23.4/59.4 8.0/20.3 — 105/48
2 Feet 4862030 32.0/81.3 29.0/73.7 24.0/61.0 12.0/30.5 21.6/54.9 37.8/96.0 31.5/80.0 27.7/70.4 23.4/59.4 10.0/25.4 — 135/61
3 Feet 4863010 22.8/57.9 29.0/73.7 36.0/91.4 18.0/45.7 33.6/85.3 28.6/72.6 22.3/56.6 19.0/48.3 23.4/59.4 8.0/20.3 — 135/61
A A
3 Feet 4863030
Enclosure Width Enclosure Width
32.0/81.3 29.0/73.7 36.0/91.4 18.0/45.7 33.6/85.3 37.8/96.0 31.5/80.0 27.7/70.4 23.4/59.4 10.0/25.4 — 160/73
3.2" (8.1 cm) for B 3.2" (8.1 cm) for B
4 Feet
3912401 4864010 22.8/57.9 29.0/73.7 48.0/121.9 24.0/61.0 45.6/115.8 28.6/72.6
3912401 22.3/56.6 19.0/48.3 23.4/59.4 8.0/20.3 — 160/73
4 Feet 4864030 32.0/81.3 29.0/73.7 48.0/121.9 24.0/61.0 45.6/115.8 37.8/96.0 31.5/80.0 27.7/70.4 23.4/59.4 10.0/25.4 — 185/84
5 Feet 4865010 22.8/57.9 29.0/73.7 60.0/152.4 30.0/76.2 57.6/146.3 28.6/72.6 22.3/56.6 19.0/48.3 23.4/59.4 8.0/20.3 10.0/25.4 290/132
5 Feet 4865030 32.0/81.3 29.0/73.7 60.0/152.4 30.0/76.2 57.6/146.3 37.8/96.0 31.5/80.0 27.7/70.4 23.4/59.4 12.0/30.5 10.0/25.4 340/154
5 Feet* 4865060
Accessory Accessory Exhaust Transition
32.0/81.3 35.5/90.2 60.0/152.4 30.0/76.2 57.6/146.3 37.8/96.0
Exhaust Transition 31.5/80.0 27.7/70.4 30.0/76.2 12.0/30.5 10.0/25.4 380/172
6 Feet Adapter4866010
3912401 Centerline Adapter 3912401 Centerline
22.8/57.9 29.0/73.7 72.0/182.9 36.0/91.4 69.6/176.8 28.6/72.6 22.3/56.6 19.0/48.3 23.4/59.4 8.0/20.3 10.0/25.4 340/154
6 Feet 4866030 32.0/81.3 29.0/73.7 72.0/182.9 36.0/91.4 69.6/176.8 37.8/96.0 31.5/80.0 27.7/70.4 23.4/59.4 12.0/30.5 10.0/25.4 395/179
6 Feet* 4866060 32.0/81.3 35.5/90.2 72.0/182.9 36.0/91.4 69.6/176.8 37.8/96.0 31.5/80.0 27.7/70.4 30.0/76.2 12.0/30.5 10.0/25.4 440/220
8 Feet 4868010 22.8/57.9 29.0/73.7 96.0/243.8 48.0/121.9 93.6/237.7 28.6/72.6 22.3/56.6 19.0/48.3 23.4/59.4 8.0/20.3 24.0/61.0 455/206
8 Feet 4868030 32.0/81.3 29.0/73.7 96.0/243.8 48.0/121.9 93.6/237.7 37.8/96.0 31.5/80.0 27.7/70.4 23.4/59.4 12.0/30.5 24.0/61.0 520/236
C C
8 Feet* 4868060
Sash Opening32.0/81.3 35.5/90.2 96.0/243.8 48.0/121.9 93.6/237.7
Sash Opening 37.8/96.0 31.5/80.0 27.7/70.4 30.0/76.2 12.0/30.5 24.0/61.0 580/263
TOP
* Includes waste chute VIEW TOP VIEW
17
7.0" (17.8 cm)
A
Protector Demonstration Hoods
®
Protector Demonstration Hoods are low • Two utility ports with iris openings that Models S28143 & S28144
profile, light-duty fume hoods designed to allow passage of tubing, electrical cords require:
provide 360° of close observation of proce- and interface cables from inside to back • Connection to a remote blower,
dures during educational demonstrations. exterior for connection to services. house exhaust or FilterMate
• Flexible exhaust options. 2" x 10" rectan- Portable Exhauster. See pages 20-21
All models feature: gular exhaust collars on the top and for FilterMate. See pages 26-27 and
• Deep 23" interior that easily accommo- bottom allow the Protector Demonstration back cover for Remote Blowers and
dates a variety of apparatus. Hood to be connected to ductwork for ductwork.
• Patented* Clean-Sweep™ air foil that exhausting to the outside or to a Filter- • Work surface and supporting base.
allows air to sweep the work surface for Mate Portable Exhauster for filtered See page 25 for Cart. See page 25 for
maximum containment. Airflow open- removal of fumes and/or particulates. work surface.
ings pull inflow air from under the air Using the bottom exhaust collar keeps Accessories include (see pages
foil so that clean air continually flows ductwork hidden, maximizing room 25-27 and back cover):
through the air foil creating a constant visibility.
• Fluorescent Task Lights.
barrier of protection from contaminants. All models conform to • Exhaust Transition Adapters.
• Upper containment sash foil that bleeds the following regulations
• Exhaust Dampers.
air into the enclosure to direct concen- and standards:
trations of contaminants away from the • Guardian Airflow Monitors.
• SEFA 1-2010
operator’s breathing zone. • Modified ASHRAE 110-1995 • Cart.
• Upper dilution air supply that introduces • ANSI Z9.5-2011 • Remote Blowers.
room air at the top of the sash to dilute • UL 61010-1 (115 volt models)
concentrations in the upper chamber • CAN/CSA C22.2 No. 61010.1
and bathes the back of the sash with Contact Labconco at 800-821-5525 or
(115 volt models)
clean air. 816-333-8811 for blower sizing assistance
• CE Conformity Marking and ordering information on accessories not
• Clear rear baffle that directs air streams (230 volt models)
included in this brochure.
to the back of the interior for removal • SEFA 8-2010, Cabinet Surface Finish Tests
through the exhaust connection. The
baffle may be pivoted downward for Nominal Overall Sash Opening Total Exhaust CFM and Static Pressure
cleaning. Width Height Height 100 fpm S.P. 80 fpm S.P. 60 fpm S.P.
• Side-entry air foils that allow air to 3 Feet 22.8" 8" 185 0.10" 145 0.06" 110 0.04"
sweep across the interior glass surfaces
3 Feet 32.0" 10" 230** 0.15" 185 0.10" 140 0.06"
to enhance containment.
• Sturdy glacier white and gray powder- Exclusive Feature * U.S. Patent No. 6,461,233
coated aluminum frame. ** FilterMate Portable Exhauster with two filters provides up to 220 CFM and with single filter provides up to 270 CFM.
18
Ordering Information & Dimensional Data
Protector® Demonstration Hoods
Protector Demonstration Hood Systems – include Cart with Work Surface, Lower Transition Adapter and FilterMate Portable Exhauster for
use with two Carbon Filters or one Carbon Filter and one HEPA Filter in any combination.*
3944300, 3945000
& 3945020
3944301, 3945001
& 3945021
20. 0" 3945000
3944300, 29. 3" 3945001
3944301,
A
3 Feet S28479 115 volts, 60 Hz, 10 amps LOADI NG HEIGHT
& 3945020
22.3"
20.0"
LOADING
& 3945021
31.
29.6"3"
HEIGHT
22.8" 125/57
B
A INTERIOR
LOADING HEIGHT
HEIGHT INTERIOR
LOADING HEIGHT
HEIGHT
3 Feet S79524B 115 volts, 60 Hz, 10 amps BC 22.3"
22.8"
ENCLOSUREHEIGHT
INTERIOR HEIGHT
32.0"6"
31.
ENCLOSURE
INTERIOR
32.0"
HEIGHT
HEIGHT
135/61
3 Feet 3945020** 28.8"
230 volts, 50/60 Hz, 5 amps DC 22. 6"
HEIGHT W/ HEIGHT
ENCLOSURE MONITOR
37.9"
32.0"
22.8"
HEIGHT W/ HEIGHT
ENCLOSURE MONITOR 125/57
8.0"
28.6" 10.
37.9"0"
E
D
3 Feet 3945021** 230 volts, 50/60 Hz, 5 amps SASH OPENING
HEIGHT
58.
8.0" 8"
W/ MONITOR SASH
HEIGHT OPENI
10.
68.0"0"
32.0"
NG
W/ MONITOR
135/61
E
F SASH OPENING
HEIGHT W/ CART SASH OPENI
HEIGHT NG
W /CART
58.6"
64. 8" 73. 9"
68.0"
F
* Filters are required but not included. See page 22 for ordering information. ** International electrical configurationG HEIGHT W/ CART &
MONITOR
HEIGHT
HEIGHT
MONITOR
W/WCART
/CART
&
64.6" 73.9"
G HEIGHT W/ CART & HEIGHT W/ CART &
MONITOR MONITOR
OPTIONAL LOWER
TRANSITION CART
OPTIONAL 29.1" TRANSITION
LOWER HANDLE
ADAPTER
TRANSITION ADAPTER CART
(73.9
29.1"cm) TRANSITION HANDLE
ADAPTER (73.9 cm) ADAPTER
A B C D E F G
S28143, 19.0" (48.3 cm) 22.3" (56.4 cm) 22.8" (57.9 cm) 28.6" (72.6 cm) 8.0" (20.3 cm) 58.8" (149.4 cm) 64.6" (164.1 cm)
S28479 & loading interior enclosure height w/ sash height height
3945020 height height height monitor opening w/cart w/cart &
monitor
S28144, 27.7" (70.4 cm) 31.5" (80.0 cm) 32.0" (81.3 cm) 37.9" (96.3 cm) 10.0" (25.4 cm) 68.0" (172.7 cm) 73.9" (187.7 cm)
S79524B & loading interior enclosure height w/ sash height height
3945021 height height height monitor opening w/cart w/cart &
monitor
19
FilterMate Portable Exhausters
™
20
Ordering Information & Dimensional Data
FilterMate™ Portable Exhausters
Models S28147, S28149, Models S28150 & 3970021 Models S28148 & 3970023
3970020 & 3970021 12.0" (30.5 cm)
12.1" (30.7 cm) 12.0" (30.5 cm) 12.0" (30.5 cm)
5.4"
5.4" (13.7 cm)
5.4" 5.4"
12.1" (30.7 cm) (13.7 cm) (13.7 cm) 12.0" (30.5 cm) (13.7 cm)
14.2"
cm) 4.88" (12.4 cm)
(36.114.2" 15.2"
14.0" DIA. INLET
(36.1 cm) 4.88" (12.4 cm) (38.6
15.2"cm) 14.9"
(35.6 cm) 5.4" 18.6" 4.88" 5.4"
DIA. INLET (38.6 cm) (37.8 cm) (12.4 cm)
4.88" (12.4 cm) DIA. INLET (13.7 cm) (47.218.6"
cm) (13.7 cm)
DIA. INLET
(47.2 cm)
14.0" 14.9" 4.88"
(35.6 cm) (37.8 cm) (12.4 cm)
4.88" (12.4 cm) DIA. INLET
DIA. INLET
TOP
TOP VIEW
6.06" (15.4 cm) EXHAUST ID 5.0"
TOP
TOP VIEW
THIMBLE CONNECTION
6.06" TO OUTSIDE
(15.4 cm) EXHAUST ID 5.0"
THIMBLE CONNECTION TO TOP OUTSIDEVIEW
TOP VIEW TOP VIEW
2.5" (6.4 cm) TOP
SPEED 3.5" (8.9 cm)
2.5" (6.4 cm) TOP VIEW
CONTROL 3.5" (8.9 cm)
79" (200.7 cm) 4.5"
2.5" (6.4 cm) 12.0" (30.5 cm) 2.5" (6.4 cm) 115V-15A POWER CORD (11.4 cm)
4.5" 2.5" (6.4 cm)
SPEED (11.4 cm) SPEED
2.5" (6.4 cm) (115V
CONTROL MODEL) CONTROL
SPEED
5.4"22.7" 118" (299.7 cm) 250V-10A CONTROL
79" (200.7POWER
250V-10A cm) CORD 79" (200.7 cm) 22.7"
20.2" (13.7
(57.7cm)
cm) 115V-15A POWER CORD 20.2" 115V-15A
79" (200.7POWER
cm) CORD
W/OUT PLUG 12.0" (30.5 cm) (57.7 cm)
2.1" (30.7 cm) (51.3 cm) (115V MODEL)
(230V MODEL) (51.3 cm) (115V MODEL)
115V-15A POWER CORD
14.2" 24.7"
(36.1 cm) 4.88" (12.4 cm) 15.2"
22.7"
118" (299.7 cm) 250V-10A
(62.7
(115V
118" MODEL)
(299.7 cm)
DIA. INLET 250V-10A POWER CORD 24.7"cm)
5.4" 20.2" 250V-10A
118" POWER
(299.7 cm) CORD 22.7"
5.4" 20.2" (38.6cm)
(57.7 cm) 20.2" (62.7 cm)
18.6" W/OUT PLUG (13.7 cm) W/OUT
250V-10APLUG
POWER CORD (57.7 cm)
(13.7 cm)(51.3 cm) (51.3
20.2"cm) (51.3 cm)
(47.2 cm) (230V MODEL) (230V MODEL)
W/OUT PLUG
(51.3 cm) 8A POWER OUTLET
14.9" (115V or 230V 4.88"MODEL) (230V MODEL)
(37.8 cm) (12.4 cm)
23.0" (58.4 cm) 10A FUSE 23.0" (58.4 cm)
DIA. INLET
SIDE VIEW REAR VIEW 8A POWER OUTLET 8A POWER OUTLET R
SIDE VIEW
6.06" (15.4 cm) EXHAUST ID 5.0" (115V or 230V MODEL) (115V
8A or 230V
POWER MODEL)
OUTLET
23.0" (58.4
THIMBLE CONNECTION TO cm)
OUTSIDE 23.0" (58.4 cm)
10A FUSE 10A
(115VFUSE
23.0" (58.4 cm) or 230V MODEL)
REAR VIEW 23.0" (58.4 cm) 10A FUSE
SIDE
SIDE VIEW TOP VIEW SIDE
SIDE VIEW TOP VIEW REAR VIEW
SIDE
SIDE VIEW R
W REAR VIEW
SIDE VIEW
3.5" (8.9 cm)
4.5" 2.5" (6.4 cm)
2.5" (6.4 cm) SPEED (11.4 cm) SPEED
SPEED CONTROL
CONTROL CONTROL
79" (200.7 cm) 79" (200.7 cm)
79" (200.7 cm) 115V-15A POWER CORD
115V-15A POWER CORD 115V-15A POWER CORD
(115V MODEL) (115V MODEL)
(115V MODEL)
118" (299.7 cm) 250V-10A 24.7" 118" (299.7 cm)
22.7" 118" (299.7 cm) 22.7" 250V-10A POWER CORD
250V-10A POWER CORD (62.7 cm) 20.2" 250V-10A POWER CORD (57.7 cm)
(57.7 cm) 20.2" W/OUT PLUG (51.3 cm) W/OUT PLUG
W/OUT PLUG (230V MODEL)
(51.3 cm) (230V MODEL) (230V MODEL)
Below is an Application Matrix that pro- and, if so, estimate filter life. To begin the • Organic Filters are suitable for vapors
vides examples of appropriate uses for process, please complete the Chemical from solvents including acetone, ethyl
carbon and/or HEPA filters expended Usage Assessment Form available on acetate, toluene and xylene.
in the FilterMate Portable Exhauster . our website at www.labconco.com or call • Formaldehyde Filters are suitable for
Whether or not any ductless enclosure is us at 800-821-5525 or 816-333-8811. vapors from formaldehyde, formalin
appropriate for your application requires Carbon and HEPA Filters are available and gluteraldehyde.
consideration of factors such as the in a variety of types and, in some cases, • Ammonia Filters are suitable for
time-weighted exposure limits of your may be used in carbon/HEPA filter com- ammonia and low molecular weight
materials. Using Labconco’s exclusive bination. An online Chemical Guide, amines.
chemical assessment program, our tech- available at www.labconco.com, allows
• HEPA Filters, 99.99% efficient, are suit-
nical specialists can help you determine if you to search individual chemicals to
able for removing particulates such as
a Labconco ductless enclosure is the right determine their suitability for use with a
powders and pollen. They should not
ventilation product for your application carbon-filtered enclosure.
be used to capture biohazardous
materials or volatile organic material.
Application Matrix
Filter Type FilterMate & Protector Work Station FilterMate
Configuration Organic Ammonia Formaldehyde Carbon & HEPA* HEPA
Asbestos handling •
Clean room/critical environment •
Combination dry and liquid chemicals •
Drug compounding/research • •
Endoscopy instrument cleaning •
Histology/cytology tissue staining, coverslipping •
Histology/pathology
• •
Hormone research • •
Non-biohazardous microbiological samples with trace chemicals** •
Particulates in conjunction with chemical agents •
Pathology/tissue grossing • •
Photo-engraving •
Plastics production •
Pollen handling • •
Soldering • •
Solvent cleaning •
Solvent welding/gluing •
Weighing chemical powders • •
* Carbon filter type varies based on application
**The FilterMate Portable Exhauster is not designed to accommodate changing and disposing of biohazardous filters and materials and, therefore, should not be used as part of a biosafety enclosure.
3923400 Organic Carbon Filter, Type AC. Contains 12 pounds of granular activated carbon media. 14/6
3923401 Formaldehyde Carbon Filter, Type ST-1. Contains a minimum of 14 pounds of impregnated carbon media. 17/8
3923402 Ammonia Carbon Filter, Type AC. Contains a minimum of 16 pounds of impregnated carbon media. 21/10
3707900 Replacement HEPA Filter, 99.99% efficient on particles 0.3 micron in size. 10/5
3776002 Replacement Bag-In/Bag-Out Bag to ensure containment of particulate matter during HEPA filter changing. 1/0.5
1968800 Orange Cinching Strap for Bag-In/Bag-out Bag. 1/0.5
*Labconco strongly recommends ordering and keeping an extra set of filters to have readily available when filters become saturated and require replacement.
Sign up for the Filter Reminder Email Service at www.labconco.com.
22
Canopy Hoods
Dimensional Data
8.0"
4' MODEL 48.0" (121.9 cm) (20.3 cm)
6' MODEL 72.0" (182.9 cm) 30.0" (76.2 cm)
4' MODEL 10.81"
(27.5 cm) ID
Requires 6' MODEL 12.81" 2.0" (5.1 cm)
Ductwork and (32.5 cm) ID
Blower
23
Flat Work Surfaces & Accessories
Spillstopper ™ &
Flat Work Surface D
Accessories
A
B
E
C
(A) 4005100 Cold Water Faucet with Rigid Gooseneck Factory-drilled 1361100 Sepia Bronze-Coated Cold and Hot Water Mixing Faucet
mounting hole in work surface is required. Shipping weight 4 lbs. (1.8 kg) with Swivel Gooseneck Not shown. Factory-drilled mounting hole in
(A) 4005900 Cold Water Faucet with Rigid Gooseneck and Vacuum work surface is required. Shipping weight 4 lbs. (1.8 kg)
Breaker Factory-drilled mounting hole in work surface is required. 1361200 Chrome-Plated Cold and Hot Water Mixing Faucet with
Shipping weight 4 lbs. (1.8 kg) Swivel Gooseneck Not shown. Factory-drilled mounting hole in work
(B) 4005200 Oval Polypropylene Cupsink Mounts in work surface with surface is required. Shipping weight 4 lbs. (1.8 kg)
cupsink cutout. 3" x 6". 1.5" NPSM** thread. Shipping weight 4 lbs. (1.8 kg) (D) 4005000 Service Fixture Specify air, gas or vacuum. Factory-drilled
4005201 Cupsink Cover Black solid epoxy resin cover for oval cupsink mounting hole in work surface is required. Shipping weight 4 lbs. (1.8 kg)
cutout. Provides a continuous work surface when a cupsink is not in use. (E) 4005800 Electrical Receptacle Pedestal-type, 115 volt, 15 amp
7.4" wide x 4.4" deep x 0.3" thick (19 x 12 x 0.8 cm). Shipping weight 2 lbs. duplex. Factory-drilled mounting hole in work surface is required.
(0.9 kg) Shipping weight 4 lbs. (1.8 kg)
(C) 1432600 Trap, PVC 1.5” diameter drum with coupling nut. For use with
cupsink. Shipping weight 10 lbs. (4.5 kg)
* Basic Hoods are not as wide or as deep as the work surfaces that support them.
** National Pipe Straight Mechanical
24
Accessories
Protector XVS Ventilation Stations & Protector® Demonstration Hoods
®
3975500 60.0" w x 26.7" d 5' Protector XVS - 29.0" deep models 140/64
3975501 60.0" w x 35.5" d 5' Protector XVS - 35.5" deep models 180/82
3975600 72.0" w x 26.7" d 6' Protector XVS - 29.0" deep models 170/77
3975601 72.0" w x 35.5" d 6' Protector XVS - 35.5" deep models 220/100
3975800 96.0" w x 26.7" d 8' Protector XVS - 29.0" deep models 240/109
3975801 96.0" w x 35.5" d 8' Protector XVS - 35.5" deep models 290/132
25
Accessories
Protector XVS Ventilation Stations & Protector® Demonstration Hoods
®
3912402
Catalog3912402
# Description Shipping Wt. lbs./kg
3912402
3912400 Upper Exhaust Transition Adapter, 2.0" x 10.0" rectangular to 5.0" diameter
3912403 5/2
3912400 3912401
round for connection to 5" ID hose. Included with FilterMate Portable Exhauster.
3912401 Upper Exhaust Transition Adapter, 2.0" x 10.0" rectangular to 6.0" diameter 5/2
3912401
round for connection to 6" OD duct.
3912402 Lower Exhaust Transition Adapter, 2.0" x 10.0" rectangular to 5.0" diameter 5/2
round for connection to 5" ID hose.
3912402
3912403
3912403 Included with Protector Demonstration Hood System.
3912403 Lower Exhaust Transition Adapter, 2.0" x 10.0" rectangular to 6.0" diameter 5/2
round for connection to 6" OD duct.
3912402 3912403
3927500 5" ID, clear urethane, smooth bore with white helix, static dissipative, 3/1
suitable for pharmaceutical and clean room applications.
3927600 6" ID, black thermoplastic rubber hose with 6.09" ID cuffs, suitable for 3/1
pharmaceutical and clean room applications. May be used to duct to the outside.
Requires 3927400 Adapter, sold separately. See page 27.
26
Accessories
Protector XVS Ventilation Stations & Protector® Demonstration Hoods
®
Ductwork
Equivalent Shipping Wt.
Catalog # Description Resistance † lbs./kg
4708600 Thermoplastic Duct, 6.625" OD, 6.25" ID, 10' length 10' 25/11
4708900 Female PVC Duct Coupling, 6" nominal diameter, 0' 4/2
connects two sections of Thermoplastic Duct
4708700 90° PVC Elbow, 6" nominal diameter, has belled end connections 12' 1/0.5
to directly receive Thermoplastic Duct or Male Duct Coupling
3924000 Manual Exhaust Damper, powder-coated steel, 6" nominal diameter 1' 1/0.5
4724200 Manual Exhaust Damper, PVC, 6" nominal diameter 1' 1/0.5
4861800 Flexible Duct Connection, 7" nominal diameter, 1' 8/4
for use with 6" nominal diameter duct
3927400 Adapter, 5" round to 6" round, for use with 3927600 Hose 1' 1/0.5
4861700 Blower Transition Adapter, 4.25" x 7.75" rectangle to 6" diameter round 1' 3/1
4722200 Zero Pressure Weathercap, 6" nominal diameter, fits atop Thermoplastic Duct 5' 20/9
†
Equivalent resistance is measured in feet of straight duct.
Remote Blowers
A remote blower is required when ducting the Protector XVS Ventilation Station or Protector Demonstration Hood to the
outside. The direct drive blower has a 1/4 hp TEFC-type motor and overcomes external static pressure of 0.5" at 420 CFM.
Housing and impeller are corrosion-resistant, phenolic-coated steel. Blower inlet is 5.94" OD and is sized to accept 6" nominal
diameter PVC duct. Blower outlet is 4.25" x 7.4" OD. Dimensions: 14.6" w x 13.5" d x 13.25" high.
5.0"
(12.7 cm)
5.9"
(15.1 cm)
OD
7.4" 7.1"
(18.75 cm) (18.1 cm)
8.25"
(21.0 cm)
27
Accessories
Protector XVS Ventilation Stations & Protector ® Demonstration Hoods
®
© 2016 by Labconco Corporation Printed in the U.S.A. Product design subject to change without notice. Rev 040816 BN0630162