• Prior to the adjustment, sufficiently warm up the machine. 1. Set the engine key to the "ON" position (the engine is not started). 2. Set the engine key to the "ON" position (the engine is not started).
3. Press the "CHECK" switch of the cluster gauge.
(The screen can be changed whenever this switch is pressed.) Then, the message "STEP3" is displayed on the display screen of the cluster.
4. Start the engine, and press the "ZERO" switch of the
cluster gauge. Then, the engine speed is acceler- MEMORY ated gradually.
5. When the engine speed reaches the high idling, it is
decreased gradually.
6. When the engine speed reaches the low idling, the
message "G-5" is displayed on the display screen of the cluster.
7. Return the "ADJUSTMENT" switch to the "RUN" po-
sition.
Adjustment of engine speed
A. Adjustment switch: "TEST" position "STEP 3" ENG. B. Inching switch: START C. "Zero" switch: Press D. Engine automatic adjustment E. Adjustment switch: "RUN" position