Technical rataon
ProRox PS 960% Pipe section
‘Old Equivalent Grade: RockTech SPI 120
Dimensions Length: 1200 mm
Internal diameter pipe insulation
"Nominal pipe size (NPS) inches (ASTM C5B5-10) mm
* a
# a
i Ea
1% 8
1% eo
2 o
2M %
3 Ey
au 102
4 ns
4% (Only avaiable in Rayong facton) 128
5 143
a 170
7 196
8 za
ue
10 218
1 300
2 326
1“ 388
16 4088
18 4596
2 S104
2 S012
24 er
% e628
2 736
0 (Only avaiable in Bukit Raa factor) Tea
32 (Only avin in Bukit Raa Factor) e152
ProRex Product Catalogue
10Applications
ProRax PS 960% is pre-formed stone wool
Pipe section. The sections are supplied split
{and hinged for easy snap-on assembly, and
ore suitable fr the thermal and acoustic
insulation of the industrial pipe work.
Compliance
ProRox PS 960" Pipe Sectione comply with
the requirements asset by internationally
rogorizod CINI 2.2.03, ASTM C547 Grade
Acype lM
Installation guidelines
‘Assembly
Fit the Proftax PS 960% closely around the
Pipe, with the lengthwise horizontal joint
tured towards the underside. The
lengthwise joints must be staggered at on
‘Tectia nsdaton
angle of atleast 30 degrees to each other.
‘The shells secured wih galvanised binding
wire (thickness 0.5mm, at least 3/m). For
insulation thickness above 100mm (or
‘temperatures > 250°C) the insulation
should be applied in atleast two layers. In
‘the cese of mult-leyerinsultion itis
recommended thatthe lengthwise and
crosswise joints are staggered
(masonry bond,
Support construction
(On pipes where mechanical loading
(eg. strong vibrations) ofthe insulation
is expected andor the temperature i
Figher than 200°C, a support structure
(epecess should be constructed. The
number of spacers depends on the
temperature and the mechanical load. Asa
CNet
‘guide, the following intermediate distances
can be used
1 Horizontal pipe work: 3 to 4m
Vertical pipe work: 5 to 6m
Finishing
All pipe sections should be finished vith @
‘metal (e.g, aluminium) cladding, Where
necessary, expansion joints are required to
cater for expansion ofthe pipes. Bath the
Iongthwise and circular joints are fastonad
with sheet-metal screws: hard aluminium or
stainless steel 1/2", 8 per mete. Close
‘expansion joints with a sta tensioning
Wie. Connections to mountings, haat and
lend caps atc. should be made watertight
‘using an eppropriete sealant.
Product properties
Performance Standard
Mean Temp) 50 | 100 | 150 | 20 250 | 300 | 350
‘Thermal Conductivity ASTMCHS
awd) 037 | 0042 | 0.048 ooss 0063 0072 | O.088
Nominal Density 120 4g/m? ASTM C32
Maximum Service ASTM Cant!
Temperature one caer
FuroCiaes AL
Reaction to Fre Surface burning characteristics; See
Fiome spread = pessed, Smoke development = possed
Less han 10 pem_ asinicant
Chloride Content Conforms ta the sianless tee carrosion specication ASTM C692/
‘sper ASTM C795 cn
STM cr1087
Molsture Absorption Less ton 1 weicht pe
‘Woter Absorption Less than 1 kg/m? EN 13472
"Note: Allinformation and data for technical parameters are based on laboratory testing.
ProRox Product Catalogue
"1