You are on page 1of 2

Installation Instructions

I/O Breakout Board


Catalog Number 2071-TBIO

Install I/O Breakout Board

Mounting Screw (x2)

Tie Wrap

Terminal Block
I/O Cable

Attribute Value
Screw terminal wire range 1.5…0.2 mm2 (16…24 AWG)
Strip length 5…6 mm (0.20…0.24 in.)
Screw terminal torque value 28.2 N•cm (2.5 lb•in)
Mounting screws torque value 28.2 N•cm (2.5 lb•in)

Tie wrap and I/O cable are supplied by customer.


Connector Pinout
Signal IOD Pin IOD Pin Signal

VCMD- 20 48 OUTPUT 3-
48
VCMD+ 19 20 47 OUTPUT 3+
47
HF_PULS- 16 19 46 FAULT-
46
16
HF_PULS+ 15 45 45 FAULT+
15
44
ESTOP 10 10 44 OUTPUT 2-
43
INPUT 6 8 8 43 OUTPUT 2+
42
7
INPUT 5 7 41 42 OUTPUT 1-
6
INPUT 4 6
24 41 OUTPUT 1+
5
23
INPUT 3 5 4 24 HF_SIGN-
22
3
INPUT 2 4 21 23 HF_SIGN+
2
INPUT 1 3 22 ICMD-

24V COM 2 21 ICMD+

Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400

Publication 2071-IN002A-EN-P - July 2010 PN-79401


Copyright © 2010 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.

You might also like