Professional Documents
Culture Documents
Copier B/W
Issued by Canon Europa N.V.
Hardware
Location:
Hopper Assembly
Subject:
Measure against void or blank image
Detail:
<Symptom>
When outputting an image right after supplying Toner in Service Mode (COPIER > FUNCTION > INSTALL >
TONER-S) at the time of installation, void or a blank image sometimes occurs.
<Cause>
When executing TONER-S in Service Mode, the sufficient amount of Toner is not supplied from the Hopper
Assembly [2] to the Developing Assembly [3].
Servicing work:
In case that the foregoing symptom occurs, re-execute the following Service Mode: COPIER > FUNCTION >
INSTALL > TONER-S.
(1/1)