Professional Documents
Culture Documents
MATERIALS
fck 32 N/mm² γs 1.15 steel Cover 35 mm
fyk 500 N/mm² γc 1.5 concrete dg 20 mm
φ 2 φef 1.15 Δc,dev 10 mm Remote
Steel class A CONNECTING BEAMS/SLABS end
DESIGN SECTION Clear height, L = 3600 mm b (mm) h (mm) L (m) (F) or (P)
h 400 mm RESTRAINTS Top left 350 500 7.5 F
b 250 mm Top F Fixed Top right 350 500 6 F
Bars per face 2 No Btm F Fixed Bottom left 350 500 7.5 F
All bars in 250 wide faces Braced Y Bottom right 350 500 6 F
. Beam stiffnesses are 70% of uncracked stiffness
Column above? Y Col below? Y
BAR ARRANGEMENTS Data on connecting beams only affects loadcases, not charting.
Type Bar Ø Asc % Link Ø Bar c/c Nbal (kN) Nuz (kN) Checks
H 40 5.03 10 120.0 0.0 0.0 Asc > 4 %
H 32 3.22 8 132.0 733.7 2880.9 ok
H 25 1.96 8 139.0 752.9 2465.0 ok
H 20 1.26 8 144.0 764.9 2230.4 ok
H 16 0.80 8 148.0 773.5 2080.2 ok
H 12 0.45 8 152.0 781.1 1963.5 ok
N:M INTERACTION CHART for 400 x 250 column, grade C32, 35 mm cover and 2 bars on 250 mm faces
3500
3000
2600
AXIAL COMPRESSION, NRd (kN)
2500 2500
2000
1750
1500
1350
1000
610
500 500
0
0 50 100 150 200 250 300
MOMENT MRd X (kNm)
M02 M01 M02 M01
LOADCASES Load case NEd (kN) (kNm) MEd (kNm) Load case NEd (kN) (kNm) MEd (kNm)
1 500 165 154 167.7 4 H25 4 610 80 70 83.2 4 H12
moment input 2 1750 120 100 129.3 4 H32 5 1350 185 162 192.2 4 H32
ok 3 2600 35 30 52.0 4 H32 6 2500 150 135 163.3 No Fit
Project Spreadsheets to EC2
Location Columns at A1, A2 etc
COLUMN CHART FOR SYMMETRICALLY REINFORCED RECTANGULAR COLUMNS BENT ABOUT THE X-X AXIS TO EN 1992-1 : 2004
CALCULATIONS
l= 0.80 ecu3 = 0.0035
h.fcd = h.accfck/gc = 18.13 N/mm² ec3 = 0.00175 ALL CALCULATIONS DERIVED FROM 0.00 0.00
fyd = 434.78 N/mm² (1-ec3/ec3u)h 200 FIGURES 3.5 AND 6.1 320.00 320.00
net fyd = 416.65 N/mm²
40 Bar diameter
d' = 65 mm d= 335 mm Asc = 0.0 mm²
N=0 quadratic a = 3627 b = 0.0123542 c = -2E+00
Interval = 8.609 (24 intervals between N=0 and Nbal)
N=0 (solve for zero N)
x Neutral axis 0.03 8.63 17.24 25.85 34.46 43.07 51.68 60.29 68.90 77.51 86.12 94.73 103.34 111.95 120.55 129.16 137.77 146.38 154.99 163.60
Fc Conc comp force 91 31314 62537 93760 124983 156206 187429 218651 249874 281097 312320 343543 374766 405989 437212 468435 499658 530881 562104 593327
ec max Limiting strain 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350
esc Steel comp strain -9.08044 -0.02285 -0.00969 -0.00530 -0.00310 -0.00178 -0.00090 -0.00027 0.00020 0.00056 0.00086 0.00110 0.00130 0.00147 0.00161 0.00174 0.00185 0.00195 0.00203 0.00211
est Steel tens strain 46.81371 0.13230 0.06450 0.04185 0.03052 0.02372 0.01919 0.01595 0.01352 0.01163 0.01012 0.00888 0.00785 0.00697 0.00623 0.00558 0.00501 0.00451 0.00406 0.00367
fsc Steel comp stress -1816105.29 -4587.81 -1956.80 -1078.09 -638.42 -374.52 -198.54 -72.82 21.48 94.83 153.52 201.54 241.56 275.42 304.44 329.60 351.61 371.04 388.30 403.75
fst Steel tens stress 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8
Fsc Steel comp force -91 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Fst Steel tens force 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
z Conc lever arm 334.99 331.55 328.10 324.66 321.22 317.77 314.33 310.88 307.44 304.00 300.55 297.11 293.67 290.22 286.78 283.33 279.89 276.45 273.00 269.56
N Fc + Fsc - Fst 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
M MOR 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
N diff 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
M diff 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
32 Bar diameter
d' = 59 mm d= 341 mm Asc = 3217.0 mm²
N=0 quadratic a = 3627 b = 397433.58 c = -7E+07
Interval = 4.964 (24 intervals between N=0 and Nbal)
N=0 (solve for zero N)
x Neutral axis 91.22 96.18 101.15 106.11 111.07 116.04 121.00 125.97 130.93 135.89 140.86 145.82 150.78 155.75 160.71 165.68 170.64 175.60 180.57 185.53
Fc Conc comp force 330822 348823 366825 384827 402829 420831 438832 456834 474836 492838 510839 528841 546843 564845 582847 600848 618850 636852 654854 672856
ec max Limiting strain 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350
esc Steel comp strain 0.00124 0.00135 0.00146 0.00155 0.00164 0.00172 0.00179 0.00186 0.00192 0.00198 0.00203 0.00208 0.00213 0.00217 0.00222 0.00225 0.00229 0.00232 0.00236 0.00239
est Steel tens strain 0.00958 0.00891 0.00830 0.00775 0.00725 0.00679 0.00636 0.00597 0.00562 0.00528 0.00497 0.00468 0.00442 0.00416 0.00393 0.00370 0.00349 0.00330 0.00311 0.00293
fsc Steel comp stress 229.11 252.48 273.55 292.65 310.04 325.95 340.55 354.00 366.43 377.95 388.66 398.64 407.96 416.65 416.65 416.65 416.65 416.65 416.65 416.65
fst Steel tens stress 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8
Fsc Steel comp force 368524 406107 440002 470725 498703 524286 547771 569405 589399 607932 625158 641213 656210 670178 670178 670178 670178 670178 670178 670178
Fst Steel tens force 699346 699346 699346 699346 699346 699346 699346 699346 699346 699346 699346 699346 699346 699346 699346 699346 699346 699346 699346 699346
z Conc lever arm 304.51 302.53 300.54 298.56 296.57 294.58 292.60 290.61 288.63 286.64 284.66 282.67 280.69 278.70 276.72 274.73 272.74 270.76 268.77 266.79
N Fc + Fsc - Fst 0.00 55.58 107.48 156.21 202.19 245.77 287.26 326.89 364.89 401.42 436.65 470.71 503.71 535.68 553.68 571.68 589.68 607.68 625.69 643.69
M MOR 204.66 212.21 219.17 225.61 231.59 237.17 242.37 247.24 251.81 256.10 260.14 263.94 267.52 270.88 272.20 273.45 274.63 275.74 276.78 277.74
Labels for chart
N diff 55.58 51.90 48.73 45.98 43.59 41.49 39.64 38.00 36.53 35.23 34.06 33.00 31.97 18.00 18.00 18.00 18.00 18.00 18.00 18.00
M diff 7.55 6.96 6.44 5.98 5.57 5.20 4.87 4.57 4.29 4.04 3.80 3.58 3.36 1.32 1.25 1.18 1.11 1.04 0.96 0.89
25 Bar diameter
d' = 55.5 mm d= 344.5 mm Asc = 1963.5 mm²
N=0 quadratic a = 3627 b = 242574.207 c = -4E+07
Interval = 5.754 (24 intervals between N=0 and Nbal)
N=0 (solve for zero N)
x Neutral axis 74.42 80.18 85.93 91.68 97.44 103.19 108.94 114.70 120.45 126.21 131.96 137.71 143.47 149.22 154.97 160.73 166.48 172.23 177.99 183.74
Fc Conc comp force 269910 290776 311642 332508 353374 374240 395106 415972 436838 457704 478570 499436 520302 541168 562034 582900 603766 624632 645498 666364
ec max Limiting strain 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350
esc Steel comp strain 0.00089 0.00108 0.00124 0.00138 0.00151 0.00162 0.00172 0.00181 0.00189 0.00196 0.00203 0.00209 0.00215 0.00220 0.00225 0.00229 0.00233 0.00237 0.00241 0.00244
est Steel tens strain 0.01270 0.01154 0.01053 0.00965 0.00887 0.00818 0.00757 0.00701 0.00651 0.00605 0.00564 0.00526 0.00490 0.00458 0.00428 0.00400 0.00374 0.00350 0.00327 0.00306
fsc Steel comp stress 159.85 197.31 229.76 258.13 283.15 305.38 325.26 343.15 359.33 374.03 387.46 399.76 411.07 416.65 416.65 416.65 416.65 416.65 416.65 416.65
fst Steel tens stress 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8
Fsc Steel comp force 156937 193713 225564 253418 277982 299807 319327 336888 352772 367208 380384 392460 403567 409044 409044 409044 409044 409044 409044 409044
Fst Steel tens force 426847 426847 426847 426847 426847 426847 426847 426847 426847 426847 426847 426847 426847 426847 426847 426847 426847 426847 426847 426847
z Conc lever arm 314.73 312.43 310.13 307.83 305.52 303.22 300.92 298.62 296.32 294.02 291.72 289.42 287.11 284.81 282.51 280.21 277.91 275.61 273.31 271.00
N Fc + Fsc - Fst 0.00 57.64 110.36 159.08 204.51 247.20 287.59 326.01 362.76 398.06 432.11 465.05 497.02 523.37 544.23 565.10 585.96 606.83 627.70 648.56
M MOR 130.30 138.50 145.89 152.61 158.75 164.40 169.63 174.47 178.98 183.18 187.10 190.77 194.20 196.72 198.35 199.89 201.33 202.68 203.93 205.08
Labels for chart
N diff 57.64 52.72 48.72 45.43 42.69 40.39 38.43 36.75 35.30 34.04 32.94 31.97 26.34 20.87 20.87 20.87 20.87 20.87 20.87 20.87
M diff 8.20 7.39 6.72 6.14 5.65 5.22 4.84 4.51 4.20 3.92 3.67 3.43 2.52 1.63 1.54 1.44 1.35 1.25 1.15 1.06
20 Bar diameter
d' = 53 d= 347 mm Asc 1256.6 mm²
N=0 quadratic a = 3627 b = 155247.492 c = -2E+07
Interval = 6.353 (24 intervals between N=0 and Nbal)
N=0 (solve for zero N)
x Neutral axis 61.58 67.93 74.28 80.64 86.99 93.34 99.69 106.05 112.40 118.75 125.11 131.46 137.81 144.17 150.52 156.87 163.23 169.58 175.93 182.28
Fc Conc comp force 223317 246357 269398 292438 315479 338519 361560 384600 407640 430681 453721 476762 499802 522843 545883 568923 591964 615004 638045 661085
ec max Limiting strain 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350
esc Steel comp strain 0.00049 0.00077 0.00100 0.00120 0.00137 0.00151 0.00164 0.00175 0.00185 0.00194 0.00202 0.00209 0.00215 0.00221 0.00227 0.00232 0.00236 0.00241 0.00245 0.00248
est Steel tens strain 0.01622 0.01438 0.01285 0.01156 0.01046 0.00951 0.00868 0.00795 0.00731 0.00673 0.00621 0.00574 0.00531 0.00492 0.00457 0.00424 0.00394 0.00366 0.00340 0.00316
fsc Steel comp stress 79.36 135.71 182.42 221.77 255.37 284.40 309.73 332.02 351.80 369.46 385.32 399.65 412.66 416.65 416.65 416.65 416.65 416.65 416.65 416.65
fst Steel tens stress 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8
Fsc Steel comp force 49865 85270 114619 139343 160456 178695 194609 208617 221041 232136 242104 251109 259283 261788 261788 261788 261788 261788 261788 261788
Fst Steel tens force 273182 273182 273182 273182 273182 273182 273182 273182 273182 273182 273182 273182 273182 273182 273182 273182 273182 273182 273182 273182
z Conc lever arm 322.37 319.83 317.29 314.75 312.20 309.66 307.12 304.58 302.04 299.50 296.96 294.42 291.87 289.33 286.79 284.25 281.71 279.17 276.63 274.09
N Fc + Fsc - Fst 0.00 58.45 110.83 158.60 202.75 244.03 282.99 320.04 355.50 389.63 422.64 454.69 485.90 511.45 534.49 557.53 580.57 603.61 626.65 649.69
M MOR 86.65 95.27 102.88 109.70 115.86 121.49 126.66 131.43 135.85 139.96 143.79 147.35 150.68 153.06 154.95 156.73 158.38 159.92 161.35 162.66
Labels for chart
N diff 58.45 52.39 47.76 44.15 41.28 38.95 37.05 35.46 34.14 33.01 32.04 31.21 25.55 23.04 23.04 23.04 23.04 23.04 23.04 23.04
M diff 8.62 7.61 6.81 6.17 5.63 5.17 4.77 4.42 4.11 3.83 3.57 3.33 2.38 1.89 1.78 1.66 1.54 1.42 1.31 1.19
16 Bar diameter
d' = 51 d= 349 mm Asc 804.2 mm²
N=0 quadratic a = 3627 b = 99358.3951 c = -1E+07
Interval = 6.858 (24 intervals between N=0 and Nbal)
N=0 (solve for zero N)
x Neutral axis 50.69 57.55 64.41 71.27 78.12 84.98 91.84 98.70 105.56 112.41 119.27 126.13 132.99 139.85 146.70 153.56 160.42 167.28 174.14 180.99
Fc Conc comp force 183841 208713 233585 258456 283328 308200 333071 357943 382815 407686 432558 457430 482301 507173 532045 556916 581788 606660 631532 656403
ec max Limiting strain 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350
esc Steel comp strain -0.00002 0.00040 0.00073 0.00100 0.00122 0.00140 0.00156 0.00169 0.00181 0.00191 0.00200 0.00208 0.00216 0.00222 0.00228 0.00234 0.00239 0.00243 0.00247 0.00251
est Steel tens strain 0.02060 0.01773 0.01547 0.01364 0.01214 0.01087 0.00980 0.00888 0.00807 0.00737 0.00674 0.00618 0.00569 0.00523 0.00483 0.00445 0.00411 0.00380 0.00351 0.00325
fsc Steel comp stress -22.39 61.53 127.58 180.92 224.90 261.78 293.15 320.16 343.66 364.29 382.55 398.82 413.42 416.65 416.65 416.65 416.65 416.65 416.65 416.65
fst Steel tens stress 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8
Fsc Steel comp force -9005 24743 51304 72754 90437 105266 117881 128742 138192 146489 153832 160377 166246 167545 167545 167545 167545 167545 167545 167545
Fst Steel tens force 174836 174836 174836 174836 174836 174836 174836 174836 174836 174836 174836 174836 174836 174836 174836 174836 174836 174836 174836 174836
z Conc lever arm 328.72 325.98 323.24 320.49 317.75 315.01 312.26 309.52 306.78 304.03 301.29 298.55 295.80 293.06 290.32 287.58 284.83 282.09 279.35 276.60
N Fc + Fsc - Fst 0.00 58.62 110.05 156.37 198.93 238.63 276.12 311.85 346.17 379.34 411.55 442.97 473.71 499.88 524.75 549.62 574.50 599.37 624.24 649.11
M MOR 57.75 66.68 74.39 81.21 87.34 92.90 97.99 102.69 107.04 111.08 114.85 118.35 121.63 124.08 126.20 128.19 130.04 131.75 133.33 134.77
Labels for chart
N diff 58.62 51.43 46.32 42.56 39.70 37.49 35.73 34.32 33.17 32.21 31.42 30.74 26.17 24.87 24.87 24.87 24.87 24.87 24.87 24.87
M diff 8.93 7.72 6.82 6.12 5.56 5.09 4.70 4.35 4.04 3.76 3.51 3.27 2.45 2.12 1.99 1.85 1.71 1.58 1.44 1.30
12 Bar diameter
d' = 49 d= 351 mm Asc 452.4 mm²
N=0 quadratic a = 3627 b = 55889.0972 c = -8E+06
Interval = 7.389 (24 intervals between N=0 and Nbal)
N=0 (solve for zero N)
x Neutral axis 39.18 46.57 53.96 61.35 68.74 76.13 83.52 90.91 98.30 105.68 113.07 120.46 127.85 135.24 142.63 150.02 157.41 164.80 172.18 179.57
Fc Conc comp force 142109 168906 195703 222500 249297 276094 302891 329688 356485 383282 410079 436876 463673 490470 517266 544063 570860 597657 624454 651251
ec max Limiting strain 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350 0.00350
esc Steel comp strain -0.00088 -0.00018 0.00032 0.00070 0.00101 0.00125 0.00145 0.00161 0.00176 0.00188 0.00198 0.00208 0.00216 0.00223 0.00230 0.00236 0.00241 0.00246 0.00250 0.00254
est Steel tens strain 0.02785 0.02288 0.01927 0.01652 0.01437 0.01264 0.01121 0.01001 0.00900 0.00812 0.00736 0.00670 0.00611 0.00558 0.00511 0.00469 0.00430 0.00395 0.00363 0.00334
fsc Steel comp stress -193.48 -54.61 46.24 122.79 182.88 231.31 271.18 304.56 332.92 357.32 378.52 397.13 413.59 416.65 416.65 416.65 416.65 416.65 416.65 416.65
fst Steel tens stress 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8 434.8
Fsc Steel comp force -43764 -12351 10459 27774 41368 52322 61338 68889 75304 80823 85620 89829 93551 94244 94244 94244 94244 94244 94244 94244
Fst Steel tens force 98346 98346 98346 98346 98346 98346 98346 98346 98346 98346 98346 98346 98346 98346 98346 98346 98346 98346 98346 98346
z Conc lever arm 335.33 332.37 329.42 326.46 323.50 320.55 317.59 314.64 311.68 308.73 305.77 302.82 299.86 296.90 293.95 290.99 288.04 285.08 282.13 279.17
N Fc + Fsc - Fst 0.00 58.21 107.82 151.93 192.32 230.07 265.88 300.23 333.44 365.76 397.35 428.36 458.88 486.37 513.16 539.96 566.76 593.56 620.35 647.15
M MOR 34.44 43.62 51.35 58.08 64.10 69.56 74.57 79.20 83.50 87.51 91.25 94.74 98.00 100.64 103.02 105.25 107.31 109.22 110.96 112.55
Labels for chart
N diff 58.21 49.61 44.11 40.39 37.75 35.81 34.35 33.21 32.32 31.59 31.01 30.52 27.49 26.80 26.80 26.80 26.80 26.80 26.80 26.80
M diff 9.18 7.73 6.74 6.02 5.46 5.01 4.63 4.30 4.01 3.74 3.49 3.26 2.64 2.38 2.22 2.06 1.91 1.75 1.59 1.43
0 0 0 0 0 0
LOADCASES 167.659091 129.306818 52 83.2440909 192.179545 163.295455
MIN M 0 58
0 2881
607116865.xls 08/24/2022
4
607116865.xls 08/24/2022
Nuz
573.75 594.15 614.54 634.94 655.33 675.73 696.12 716.52 736.91 757.31
1813333 1813333 1813333 1813333 1813333 1813333 1813333 1813333 1813333 1813333 1813333
0.00269 0.00264 0.00259 0.00255 0.00252 0.00249 0.00246 0.00243 0.00240 0.00238 0.00175
0.00238 0.00235 0.00232 0.00229 0.00227 0.00225 0.00223 0.00221 0.00219 0.00217 0.00175 0.00217
-0.00112 -0.00115 -0.00118 -0.00121 -0.00123 -0.00125 -0.00127 -0.00129 -0.00131 -0.00133 -0.00175
416.65 416.65 416.65 416.65 416.65 416.65 416.65 416.65 416.65 416.65 331.87
-205.4 -212.0 -217.9 -223.2 -228.1 -232.5 -236.6 -240.4 -243.9 -247.1 -331.9
0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0
135.00 135.00 135.00 135.00 135.00 135.00 135.00 135.00 135.00 135.00 135.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0
0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0
Nuz
591.50 612.68 633.85 655.03 676.20 697.38 718.55 739.73 760.90 782.08
1813333 1813333 1813333 1813333 1813333 1813333 1813333 1813333 1813333 1813333 1813333
0.00264 0.00260 0.00256 0.00252 0.00248 0.00245 0.00242 0.00240 0.00237 0.00235 0.00175
0.00238 0.00235 0.00232 0.00229 0.00227 0.00225 0.00223 0.00221 0.00219 0.00217 0.00175
-0.00112 -0.00115 -0.00118 -0.00121 -0.00123 -0.00125 -0.00127 -0.00129 -0.00131 -0.00133 -0.00175
416.65 416.65 416.65 416.65 416.65 416.65 416.65 416.65 416.65 416.65 331.87
-205.8 -212.3 -218.1 -223.4 -228.2 -232.6 -236.7 -240.4 -243.9 -247.1 -331.9
670178 670178 670178 670178 670178 670178 670178 670178 670178 670178 533806
-331050 -341454 -350842 -359356 -367113 -374210 -380727 -386733 -392285 -397434 -533806
141.00 141.00 141.00 141.00 141.00 141.00 141.00 141.00 141.00 141.00 141.00
2814.56 2824.97 2834.35 2842.87 2850.63 2857.72 2864.24 2870.24 2875.80 2880.95 2880.95
47.82 46.35 45.03 43.83 42.73 41.73 40.81 39.97 39.18 38.46 0.00
10.40 9.39 8.51 7.76 7.10 6.52 6.01 5.55 5.15 0.00 0
-1.47 -1.32 -1.20 -1.09 -1.00 -0.92 -0.85 -0.78 -0.73 -38.46 0
Nuz
601.85 623.48 645.11 666.74 688.37 710.00 731.63 753.27 774.90 796.53
1813333 1813333 1813333 1813333 1813333 1813333 1813333 1813333 1813333 1813333 1813333
0.00262 0.00258 0.00254 0.00250 0.00247 0.00244 0.00241 0.00238 0.00236 0.00234 0.00175
0.00238 0.00235 0.00232 0.00229 0.00227 0.00225 0.00223 0.00221 0.00219 0.00217 0.00175
-0.00112 -0.00115 -0.00118 -0.00121 -0.00123 -0.00125 -0.00127 -0.00129 -0.00131 -0.00133 -0.00175
416.65 416.65 416.65 416.65 416.65 416.65 416.65 416.65 416.65 416.65 331.87
-206.0 -212.4 -218.2 -223.5 -228.3 -232.7 -236.7 -240.5 -243.9 -247.1 -331.9
409044 409044 409044 409044 409044 409044 409044 409044 409044 409044 325809
-202252 -208563 -214261 -219430 -224142 -228454 -232415 -236066 -239443 -242574 -325809
144.50 144.50 144.50 144.50 144.50 144.50 144.50 144.50 144.50 144.50 144.50
2424.63 2430.94 2436.64 2441.81 2446.52 2450.83 2454.79 2458.44 2461.82 2464.95 2464.95
29.88 28.97 28.15 27.40 26.72 26.10 25.52 25.00 24.51 24.05 0.00
6.31 5.70 5.17 4.71 4.31 3.96 3.65 3.38 3.13 0.00 0
-0.91 -0.82 -0.75 -0.68 -0.62 -0.57 -0.53 -0.49 -0.45 -24.05 0
Nuz
609.25 631.20 653.16 675.11 697.07 719.02 740.98 762.94 784.89 806.85
1813333 1813333 1813333 1813333 1813333 1813333 1813333 1813333 1813333 1813333 1813333
0.00261 0.00256 0.00252 0.00249 0.00245 0.00242 0.00240 0.00237 0.00235 0.00233 0.00175
0.00238 0.00235 0.00232 0.00229 0.00227 0.00225 0.00223 0.00221 0.00219 0.00217 0.00175
-0.00112 -0.00115 -0.00118 -0.00121 -0.00123 -0.00125 -0.00127 -0.00129 -0.00131 -0.00133 -0.00175
416.65 416.65 416.65 416.65 416.65 416.65 416.65 416.65 416.65 416.65 331.87
-206.1 -212.5 -218.3 -223.6 -228.4 -232.7 -236.8 -240.5 -243.9 -247.1 -331.9
261788 261788 261788 261788 261788 261788 261788 261788 261788 261788 208518
-129527 -133549 -137181 -140477 -143483 -146234 -148762 -151092 -153248 -155247 -208518
147.00 147.00 147.00 147.00 147.00 147.00 147.00 147.00 147.00 147.00 147.00
2204.65 2208.67 2212.30 2215.60 2218.60 2221.36 2223.88 2226.21 2228.37 2230.37 2230.37
19.44 18.85 18.32 17.83 17.39 16.99 16.61 16.27 15.96 15.66 0.00
4.02 3.63 3.30 3.01 2.75 2.53 2.33 2.16 2.00 0.00 0
-0.59 -0.53 -0.48 -0.44 -0.40 -0.37 -0.34 -0.32 -0.29 -15.66 0
Nuz
615.16 637.38 659.59 681.81 704.02 726.24 748.46 770.67 792.89 815.10
1813333 1813333 1813333 1813333 1813333 1813333 1813333 1813333 1813333 1813333 1813333
0.00259 0.00255 0.00251 0.00248 0.00244 0.00242 0.00239 0.00236 0.00234 0.00232 0.00175
0.00238 0.00235 0.00232 0.00229 0.00227 0.00225 0.00223 0.00221 0.00219 0.00217 0.00175
-0.00112 -0.00115 -0.00118 -0.00121 -0.00123 -0.00125 -0.00127 -0.00129 -0.00131 -0.00133 -0.00175
416.65 416.65 416.65 416.65 416.65 416.65 416.65 416.65 416.65 416.65 331.87
-206.3 -212.6 -218.4 -223.6 -228.4 -232.8 -236.8 -240.5 -243.9 -247.1 -331.9
167545 167545 167545 167545 167545 167545 167545 167545 167545 167545 133452
-82939 -85505 -87823 -89926 -91845 -93601 -95216 -96704 -98081 -99358 -133452
149.00 149.00 149.00 149.00 149.00 149.00 149.00 149.00 149.00 149.00 149.00
2063.82 2066.38 2068.70 2070.80 2072.72 2074.48 2076.09 2077.58 2078.96 2080.24 2080.24
12.61 12.22 11.88 11.57 11.28 11.02 10.78 10.56 10.35 10.16 0.00
2.57 2.32 2.10 1.92 1.76 1.61 1.49 1.38 1.28 0.00 0
-0.38 -0.35 -0.31 -0.29 -0.26 -0.24 -0.22 -0.21 -0.19 -10.16 0
Nuz
621.08 643.55 666.03 688.51 710.98 733.46 755.93 778.41 800.88 823.36
1813333 1813333 1813333 1813333 1813333 1813333 1813333 1813333 1813333 1813333 1813333
0.00258 0.00254 0.00250 0.00247 0.00243 0.00241 0.00238 0.00236 0.00233 0.00231 0.00175
0.00238 0.00235 0.00232 0.00229 0.00227 0.00225 0.00223 0.00221 0.00219 0.00217 0.00175
-0.00112 -0.00115 -0.00118 -0.00121 -0.00123 -0.00125 -0.00127 -0.00129 -0.00131 -0.00133 -0.00175
416.65 416.65 416.65 416.65 416.65 416.65 416.65 416.65 416.65 416.65 331.87
-206.4 -212.7 -218.5 -223.7 -228.4 -232.8 -236.8 -240.5 -243.9 -247.1 -331.9
94244 94244 94244 94244 94244 94244 94244 94244 94244 94244 75066
-46677 -48115 -49415 -50595 -51671 -52657 -53563 -54399 -55172 -55889 -75066
151.00 151.00 151.00 151.00 151.00 151.00 151.00 151.00 151.00 151.00 151.00
1954.25 1955.69 1956.99 1958.17 1959.25 1960.23 1961.14 1961.98 1962.75 1963.47 1963.47
7.18 6.97 6.77 6.59 6.43 6.28 6.14 6.02 5.90 5.79 0.00
1.44 1.30 1.18 1.08 0.99 0.91 0.84 0.77 0.72 0.00 0
-0.22 -0.20 -0.18 -0.16 -0.15 -0.14 -0.13 -0.12 -0.11 -5.79 0
607116865.xls 08/24/2022
Ac = 100000 Stiffnesses 70% Min As
Project Spreadsheets to EC2 LOADCASES As nbal nu 1/r0 L = 3.6 TL M/θ = 680555.5556 0.115
Location Columns at A1, A2 etc Job No FB625 5027 0.000 2.205 0.00001442 I/L col = 1.45E+05 TR M/θ = 850694.4444 0.4025
COLUMN CHART FOR SYMMETRICALLY REINFORCED RECTANGULAR COLUMNS BENT ABOUT THE X-X AXIS TO EN 1992-1 : 2004 Made by RMW 3217 0.405 1.771 0.00001417 L0 = 2.127 BL M/θ = 680555.5556 0.598
Originated from TCC52.xls v4.0 on CD © 2004-22 TCC Date 24-Aug-22 1963 0.415 1.471 0.00001402 i = 115.47 BR M/θ = 850694.4444 0.1403
1257 0.422 1.301 0.00001392 an = 1 k top = 0.1 1 0.3105
804 0.427 1.193 0.00001384 q1 = 0.005 k btm = 0.1 1 0.575
LOADCASE 1 M imp 452 0.431 1.108 0.00001376
N= 500 M0e = 66 n= 0.276 Min M = 10 2.6591
Nuz Mmax Status Nuz Mmax lu M lu N lu Mdif lu Ndif kr kφ 1/r .10³ M2 MEd As min 0 167.7 ω λlim Slender ? trans Ac I "i " λ
40 0 0.0 Fails 0 0.0 #DIV/0! 0.00 0 0 0 0.875 1.460 0.0184 0.0 167.7 FAILS 12 167.7 1.205 97.22 0 170372 2.81E+09 128.4926 16.56 A
32 2880.95 267.1 ok 0 2880.9 267.1178 263.94 470.7079 3.579176 32.99881 1.000 1.458 0.0207 0.0 167.7 ok 16 167.7 0.771 83.94 0 145038 2.33E+09 126.8344 16.77 0.81303
25 2464.95 194.5 ok 25 2465.0 194.4821 194.20 497.0224 2.521813 26.34336 1.000 1.455 0.0204 0.0 167.7 ok 0.5000 20 167.7 0.471 73.35 0 127489 1.97E+09 124.3901 17.10 C
20 2230.37 152.0 Fails 0 2230.4 151.9931 150.68 485.903 2.377643 25.54605 1.000 1.453 0.0202 0.0 167.7 ok 25 167.7 0.301 66.64 0 117593 1.76E+09 122.2002 17.41 1.7
16 2080.24 124.1 Fails 0 2080.2 124.0892 124.08 499.8813 2.123554 24.87168 1.000 1.451 0.0201 0.0 167.7 ok 32 167.7 0.193 61.97 0 111259 1.61E+09 120.3266 17.68
12 1963.47 101.9 Fails 0 1963.5 101.8538 100.64 486.3679 2.380979 26.79694 1.000 1.449 0.0199 0.0 167.7 ok 40 167.7 0.108 58.07 0 106333 1.49E+09 118.5114 17.95
25 167.7
LOADCASE 2 M imp
N= 1750 M0e = 48 n= 0.965 Min M = 35 9.3068
Nuz Mmax Status Mmax lu M lu N lu Mdif lu Ndif kr kφ 1/r .10³ M2 MEd As min 0 129.3 λlim Slender ?
40 0 0.0 Fails 0 #DIV/0! 0.00 0 0 0 0.562 1.460 0.0118 0.0 129.3 FAILS 12 129.3 51.96 0 1.7
32 2880.95 189.1 ok 32 189.0957 191.24 1728.802 -15.4633 152.9958 0.590 1.458 0.0122 0.0 129.3 ok 16 129.3 44.87 0
25 2464.95 127.3 Fails 0 127.2605 138.06 1645.976 -12.4109 119.5562 0.479 1.455 0.0098 0.0 129.3 ok 20 129.3 39.21 0
20 2230.37 90.4 Fails 0 90.39848 93.76 1723.261 -12.3889 98.61232 0.382 1.453 0.0077 0.0 129.3 ok 25 129.3 35.62 0
16 2080.24 64.9 Fails 0 64.87737 69.58 1716.727 -11.6372 82.39298 0.297 1.451 0.0060 0.0 129.3 ok 32 129.3 33.12 0
12 1963.47 43.1 Fails 0 43.1452 47.97 1720.115 -13.8432 85.73378 0.212 1.449 0.0042 0.0 129.3 ok 40 129.3 31.04 0
32 129.3
LOADCASE 3 M imp
N= 2600 M0e = 14 n= 1.434 Min M = 52 13.8273
Nuz Mmax Status Mmax lu M lu N lu Mdif lu Ndif kr kφ 1/r .10³ M2 MEd As min 0 52.0 λlim Slender ?
40 0 0.0 Fails 0 #DIV/0! 0.00 0 0 0 0.350 1.460 0.0074 0.0 52.0 FAILS 12 52.0 42.63 0 1.7
32 2880.95 83.5 ok 32 83.48732 85.50 2588.223 -16.9631 99.04831 0.247 1.458 0.0051 0.0 52.0 ok 16 52.0 36.81 0
25 2464.95 0.0 Fails 0 #DIV/0! 0.00 2464.952 0 0 0.035 1.455 0.0007 0.0 52.0 ok 20 52.0 32.17 0
20 2230.37 0.0 Fails 0 #DIV/0! 0.00 2230.369 0 0 0.000 1.453 0.0000 0.0 52.0 ok 25 52.0 29.22 0
16 2080.24 0.0 Fails 0 #DIV/0! 0.00 2080.236 0 0 0.000 1.451 0.0000 0.0 52.0 ok 32 52.0 27.17 0
12 1963.47 0.0 Fails 0 #DIV/0! 0.00 1963.466 0 0 0.000 1.449 0.0000 0.0 52.0 FAILS 40 52.0 25.47 0
32 52.0
LOADCASE 4 M imp
N= 610 M0e = 32 n= 0.336 Min M = 12.2 3.2441
Nuz Mmax Status Mmax lu M lu N lu Mdif lu Ndif kr kφ 1/r .10³ M2 MEd As min 0 83.2 λlim Slender ?
40 0 0.0 Fails 0 #DIV/0! 0.00 0 0 0 0.847 1.460 0.0178 0.0 83.2 FAILS 12 83.2 88.02 0 1.7
32 2880.95 275.9 ok 0 275.8734 275.74 607.6846 1.035687 18.00178 1.000 1.458 0.0207 0.0 83.2 ok 16 83.2 76.00 0
25 2464.95 202.9 ok 0 202.8697 202.68 606.8299 1.250128 20.86603 1.000 1.455 0.0204 0.0 83.2 ok 20 83.2 66.41 0
20 2230.37 160.3 ok 0 160.3198 159.92 603.6108 1.423808 23.04043 1.000 1.453 0.0202 0.0 83.2 ok 25 83.2 60.34 0
16 2080.24 132.4 ok 0 132.429 131.75 599.368 1.57773 24.87168 1.000 1.451 0.0201 0.0 83.2 ok 32 83.2 56.10 0
12 1963.47 110.3 ok 12 110.2883 109.22 593.5556 1.747383 26.79694 1.000 1.449 0.0199 0.0 83.2 ok 40 83.2 52.58 0
12 83.2
LOADCASE 5 M imp
N= 1350 M0e = 74 n= 0.744 Min M = 27 7.1795
Nuz Mmax Status Mmax lu M lu N lu Mdif lu Ndif kr kφ 1/r .10³ M2 MEd As min 0 192.2 λlim Slender ?
40 0 0.0 Fails 0 #DIV/0! 0.00 0 0 0 0.662 1.460 0.0139 0.0 192.2 FAILS 12 192.2 59.16 0 1.7
32 2880.95 226.6 ok 32 226.5978 240.63 1193.191 -17.3802 194.2697 0.751 1.458 0.0155 0.0 192.2 ok 16 192.2 51.09 0
25 2464.95 164.5 Fails 0 164.5376 172.71 1248.84 -11.3189 140.181 0.688 1.455 0.0140 0.0 192.2 ok 20 192.2 44.64 0
20 2230.37 130.2 Fails 0 130.2141 134.91 1290.824 -9.04234 113.9029 0.633 1.453 0.0128 0.0 192.2 ok 25 192.2 40.56 0
16 2080.24 108.5 Fails 0 108.516 110.08 1331.622 -8.49622 99.75246 0.585 1.451 0.0118 0.0 192.2 ok 32 192.2 37.71 0
12 1963.47 91.5 Fails 0 91.48754 97.47 1276.396 -7.50964 92.32033 0.537 1.449 0.0107 0.0 192.2 ok 40 192.2 35.34 0
32 192.2
LOADCASE 6 M imp
N= 2500 M0e = 60 n= 1.379 Min M = 50 13.2955
Nuz Mmax Status Mmax lu M lu N lu Mdif lu Ndif kr kφ 1/r .10³ M2 MEd As min 0 163.3 λlim Slender ?
40 0 0.0 Fails 0 #DIV/0! 0.00 0 0 0 0.375 1.460 0.0079 0.0 163.3 FAILS 12 163.3 43.48 0 1.7
32 2880.95 99.4 Fails 0 99.39784 101.71 2485.301 -16.2084 102.9222 0.287 1.458 0.0059 0.0 163.3 ok 16 163.3 37.54 0
25 2464.95 0.0 Fails 0 #DIV/0! 0.00 2464.952 0 0 0.087 1.455 0.0018 0.0 163.3 ok 20 163.3 32.80 0
20 2230.37 0.0 Fails 0 #DIV/0! 0.00 2230.369 0 0 0.000 1.453 0.0000 0.0 163.3 ok 25 163.3 29.80 0
16 2080.24 0.0 Fails 0 #DIV/0! 0.00 2080.236 0 0 0.000 1.451 0.0000 0.0 163.3 ok 32 163.3 27.71 0
12 1963.47 0.0 Fails 0 #DIV/0! 0.00 1963.466 0 0 0.000 1.449 0.0000 0.0 163.3 FAILS 40 163.3 25.97 0
0 163.3
COLUMN CHART FOR SYMMETRICALLY REINFORCED RECTANGULAR COLUMNS
BENT ABOUT THE X-X AXIS TO EN 1992-1 : 2004
-=- k2 5 -=-
1.15 1.15
1 0.85
0 0
0.005 0.005
1 ?
5 ?
8 12
4.00% 4.00%
Disclaimer
All advice or information from MPA-The Concrete Centre is intended for those who will evaluate the significance and limitations of its contents
and take responsibility for its use and application. No liability (including that for negligence) for any loss resulting from such advice or
information is accepted by MPA-The Concrete Centre or its subcontractors, suppliers or advisors. Users should note that all MPA-The
Concrete Centre software and publications are subject to revision from time to time and they should therefore ensure that they are in
possession of the latest version.
This spreadsheet should be used in compliance with the accompanying publication 'User Guide RC Spreadsheets: v4' available from The
Concrete Centre www.concretecentre.com/rcdesign Tel +44 (0)1276 606800
Status of spreadsheet This spreadsheet is shareware but may not be used for commercial purposes until the user has
registered with The Concrete Centre using the licence validation form available on The Concrete
Public release version
Centre website www.concretecentre.com/rcdesign