The First lab Switch we need to create basic configuration on two switches and make 3 vlans

on switch (vlan 2 HR,vlan 3 ACC, VLan4 IT)

And make ping from pc1 to pc2 and make telnet from pc1 to Switch 1

Switch 1:

Switch>enable

Switch# configure Terminal

Switch(config)# Hostname S1

Switch(config)# Vlan 2

Switch(config-vlan)#name HR

Switch(config-vlan)#vlan 3

Switch(config-vlan)#name ACC

Switch(config-vlan#vlan 4

Switch(config-vlan)#name IT

Switch(config-vlan)#exit

Switch(config)#int Vlan 1

Switch(config-IF)# ip address 10.0.0.2 255.255.255.0

Switch(config)# NO Shut

Switch(config)#exit

Switch(config)#int Fa0/1

Switch(config-if)#switchport mode access

Switch(config-IF)#Switchport acces vlan 1

Switch(config)#exit

Switch#wr

---------------------------------------------------------------------------------------------------------------------------
Swittch 2

Switch>enable

Switch# configure Terminal

Switch(config)# Hostname S2

Switch(config)# Vlan 2

Switch(config-vlan)#name HR

Switch(config-vlan)#vlan 3

Switch(config-vlan)#name ACC

Switch(config-vlan#vlan 4

Switch(config-vlan)#name IT

Switch(config-vlan)#exit

Switch(config)#int Vlan 1

Switch(config-IF)# ip address 10.0.0.3 255.255.255.0

Switch(config)# NO Shut

Switch(config)#exit

Switch(config)#int Fa0/1

Switch(config-if)#switchport mode access

Switch(config-IF)#Switchport acces vlan 1

Switch(config)#exit

Switch#wr