You are on page 1of 1

HP Cisco Comment

system-view config terminal


quit exit
save write
reset saved-config write erase
reboot reload Initiated from User View only
display current show run
display int brief sh ip int br
display logbuffer show log
display link-aggregation show etherchannel/port-channel
display this show current interface config
sysname hostname
port link-mode bridge switchport
port link-mode route no switchport
port link-type access switchport mode access
port access vlan x switchport access vlan x
port link-type trunk switchport mode trunk
port trunk permit vlan x switchport trunk allowed vlan x
port link-aggregation group x channel-group x
interface Bridge-Aggregation x int port-channel x

You might also like