Professional Documents
Culture Documents
Adjuster
Handle
Set
PRV Screw
Body
Application/Features:
The Gardner Denver Water Jetting Systems Pressure
Regulating Valve (PRV) is designed primarily for use on
fixed-speed pumps (e.g. electric motor pumps) as a means of Inlet
controlling the system pressure. The PRV is a “needle-type”
valve which allows excess flow to be released from the system (9/16" HP)
and recirculated back to the pump. Water flow is controlled by
turning the adjuster handle on top of the PRV. The hoses attach
to the inlet/outlet in the valve body. Overhaul of the Pressure
Regulating Valve is easy and takes only a few minutes with the Dump
PRV Overhaul Kit, and may be done without removing the PRV Port
from the system. It is essential that a pressure gauge is utilized (3/8" NPT)
for adjusting system pressure using the PRV.
15
9 1 2277126 O-RING, 1-3/4", 2-129-90
10 6 1678181 SCREW, SHC, 1/2"-13 x 1"
1 11 1 3177091 PLUG, 40K REGULATOR CAP
7
12 1 3177129 CAP, 40K FLOW CONTROL VALVE
2 13 1 3177130 VALVE ADJUSTING ROD, 40K
3 14 4 1678182 SCREW, SHC, 1/4"-20 x 3/4"
16 15 2 1678183 SET SCREW, OVAL POINT 5/16"-18 x 3/4"
6 16 1 3177099 RETAINER, FLOW CONTROL, 40K
5
- 1 3177127548 40K PRV OVERHAUL KIT*
4
2 1 2280188001 SEAL, BACKUP, 3/4" x 1/2" x 1/8"
3 1 2280188 POLYSEAL, BACKUP, 3/4" x 1/2" x 1/8"
4 1 3177132 SEAT, 40K FLOW CONTROL VALVE
5 1 2280214001 SEAL, BACKUP, 1-1/4" x 1" x 1-1/8"
TORQUE TO 6 1 2280214 POLYSEAL, 1-1/4" x 1" x 1/8"
9 10 75 FT. LBS.
8 (LUBRICATED) 7 1 3177131 VALVE, 40K FLOW CONTROL VALVE
9 1 2277126 O-RING, 1-3/4", 2-129-90
11