Professional Documents
Culture Documents
[Release version]
Model Program Name Current Ver. New Ver. Program File Name Checksum Note
bizhub C554e/C454e/ A5C10Y0-F000-
MFP Firmware G20-M0 GX5-M1 53b3 None
C364e/C284e/C224e GX5-M1.exe
2. Where changed
2.1 Release of bizhub C554e/C454e/C364e/C284e/C224e Special program (Card Ver. GX5-M1)
2.2.1. The function to avoid mixing of other users' job when an error occurs. [ERBBL_1600865691,
ERBAU_1600877016]
1. Avoid the one user's document from being mixed with the other user's document in outputting if the first job is on
hold due to a print error.
1-1.When a user logs in while a job is on hold due to a print error, if the suspended job owner is another user, it will
be deleted. If its owner is the login user, it will not be deleted and will be resumed as soon as the error is resolved.
1-2.If a print error is resolved while no user logs in, the print jobs of authenticated users are not resumed and they
are not deleted.
1-3.When a print error is not resolved while no user logs in, if a print job without authentication information is sent to
the MFP, all suspended jobs of authenticated users will be deleted.
1-4.When a print error is not resolved while no user logs in, if a fax job is sent to the MFP, all suspended jobs of
authenticated users will be deleted.
1-5.After specified hours/days from an error, all suspended jobs of authenticated users will be deleted. (Print jobs
without authentication information and fax jobs will not.) The hours/days can be selected from among 2hours,
4hours, 8 hours, 1day, 2days and 3days in the Utility menu.
1-6.The target errors for the above job deletion include paper jam, paper empty, paper size mismatch and toner
empty.
1-7.When a user goes to the login screen after resolving a print error, the control panel displays "Please check the
suspended job in Job List. Please log in".
1-8.The Job ID(s) of the deleted job(s) is displayed on the control panel.
1-9.If print jobs without authentication information or fax jobs are on hold due to a print error while no user logs in,
they will be resumed as soon as the error is resolved.
The following software switch setting is required for enabling these features.
Dip SW No. 25 0x60: Function Version 7
The following administrator settings are required for enabling these features.
[Fax RX Job Priority] in [Job Priority Operation Settings] in [System Settings]: No
[Skip Job (Fax)] in [Job Priority Operation Settings] in [System Settings]: No
[Skip Job (Copy, Print)] in [Job Priority Operation Settings] in [System Settings]: No
[When # of Jobs Reach Maximum] in [General Settings] in [User Authentication/Account Track]: [Stop Job] or [Delete
Job] (Do not set to [Skip Job])
2."File Name" used in the prior scan job can be used in registering the next scan job.
"File Name" is cleared only when:
[Reset] key is pressed.
System Auto Reset or Mode Reset is activated.
User logs out.
3. When [Auto Rename Function] is enabled, a hyphen, hour (2 digits), minute (2 digits) and a serial number (1 digits)
are attached as a suffix to the File Name. (In total, six digits are attached.))
This feature can be enabled or disabled by the following software switch.
Dip SW No. 213 0x00: Disabled (Default)
Dip SW No. 213 0x20: Enabled
4. The font size of annotation can be selected from among 16, 18 or 20 point in the Annotation User Box settings.
This feature can be enabled or disabled by the following software switch.
Dip SW No. 213 0x00: Disabled (Default)
Dip SW No. 213 0x40: Enabled
2.2.3. Combined use with a special tool to confirm MFP security setting update status. [ERBUS_1600871204]
By installing this special firmware and using a special tool (SecurityInformationCollector), you can confirm whether MFP
security information has been updated.
[Configuration of MFP]
This feature can be enabled or disabled by the following software switch.
Dip SW No. 231 0x00: Disabled (Default)
Dip SW No. 231 0x02 Enabled
And the following settings are required for the tool to perform a device search. SSDP must be enabled.
Administrator Settings => Network Settings =>SSDP Settings => ON
3. Restrictions
Please apply the same programs adviced in this PRI.However, using with latest version programs is recommended.
Refer to the PRI of "bizhub C364(e) Series Mass-Production Program Maintenance Release8 Function Version7 (Ver.
G20-M0) (for Web Browser (LK-101v3)) " for details. (DLBT1611483EN)
Please refer to Service Manual and the PRI of "PRI of "bizhub C364(e) Series Mass-Production Program Maintenance
Release8 Function Version7 (Ver. G20-M0) (for Web Browser (LK-101v3))" for details. (DLBT1611483EN)
6. Note
Please be careful when you offer this program, which was just created for the specific customer.
OpenAPI:
OpenAPI Function Level 4.7
Detail:
Auth 1.0/1.1/2.0/2.1/2.5/3.5/3.6/3.7/4.0/4.1/4.2/4.5/4.6/4.7
Scan to Application 2.0/2.1/2.2/3.0/3.1/3.5/3.6/3.7/4.0/4.5/4.6
PullPrint 1.0/1.1/2.0/2.1/2.5/3.5/3.6/4.0/4.5/4.6/4.7
Other A 1.0/3.5/4.0
Job Management 1.0/3.5/3.6/4.0
1.0/1.1/1.2/1.3/2.0/2.1/2.5/3.5/3.6/3.7/3.8/4.0/4.1/4.2/4.5/4.6/4.
Setup
7
Link 4.5/4.6/4.7
Auth 1.0/1.1/1.5/3.5/3.6/3.7/4.0/4.1/4.2/4.5/4.7
Scan to Application 1.0/1.1/3.5/3.6/3.7/4.0/4.1/4.5/4.6/4.7
PullPrint 1.0/1.1/1.5/3.5/3.6/4.0/4.1/4.5
Web Browser
ScrSvr 1.0/3.5/4.0
Launcher 1.0/3.5/4.0
General 4.0/4.1/4.5/4.6
- Data appendix -
The following special ROM is included.
[Correction items]
No. CSES No. Title (Outline) GX5-M1
Problem that trouble Code: C-E303 may occur when IWS application
1 non-CSES No. Done
is started up with [Overwrite HDD Data] set to [Yes].
Problem that name resolution may fail due to the response delay
2 QUBAU_1500861291 Done
from DNS server.
Problem that the print side of Back Cover is reversed when printing
3 ERBJKA1600870121 Done
by using Secure Print.
Problem that after sending FAX/Email job by using broadcast
4 ERBJTK1600871643 Done
transmission, MFP doesn't accept next FAX/Email job.
Problem that configured Daylight Saving Time isn't reflected to the
5 ERBDFS1600874352 Done
description of sending time on E-mail Notification.
Problem that when printing a specific Word file (.docx) directly from a
6 ERBJTK1600875065 Done
USB Memory, trouble code: C-E301 occurs.
ERBHK_1600874274
ERMura1600874487 Problem that scan to SMB fails on MacOSX 10.11.5 with "Server
7 Done
ERCW__1600874683 Connection Error" on the MFP log.
ERSIND1600875870
8 ERBUS_1600867182 Problem that the trouble code C-E002 may occur irregularly. Done
Problem that an address book cannot be imported from USB memory
9 ERBJ__1600873480 if the function version for GB0-K9 or later "Version Up firmware for Done
MIF devices" is 1.
problem that an error occurs if a double-byte space is entered for
10 ERBJOS1500858854 sort character when registering a destination with an address book Done
from PSWC.
Problem that the error (GeneralTagMissing) may occur if the file
11 ERBDSP1600871851 Done
format in [Fax Forwarding Settings] is changed using PSWC.
Problem that The trouble code C-E301 (detail code: 0xC14C) may
12 ERBUS_1600876120 Done
occur when performing AirPrint.
Problem that when printing a specific Word file (.docx) directly from a
13 non-CSES No. Done
USB Memory, trouble code: C-E301 occurs.
Problem that C-E301(0xC0C2) may occur when receiving an IP-FAX
14 non-CSES No. Done
during PC-FAX TX operation of an original of 3000 pages.
Problem that C-E301(0xC0A2) may occur if printing a job with 2-
15 non-CSES No. Done
sided print mode canceled from Fiery.
Problem that toner near empty is detected even though the remaining
16 ERBDFS1600867983 Done
toner amount is enough.
17 ERBUS_1600876449 Request to indicate "Please Login to Terminal" in Vendor2 mode. Done
Special characters is not available on Software Keyboard when
18 ERDSEU1600875040 Done
entering password on Authentication Browser.
19 ERBJKG1600872691 An error message appears when trying to open scanned PDF file. Done
The counter list, Activity Report, etc. are output with the missing
20 ERBJTS1600871811 Done
image.
When [Mixed original] is selected with the ADF opened, C-
21 ERBJNG1600871418 E301(0xC0C2) occurs if scanning the original that was scanned by Done
using preview function again after deleting it.
28 ERBJ__1600876179 MFP may freeze if the image log has reached the maximum allowed. Done
The MFP may not return from Low Power mode even though you
29 ERMura1600867274 touch the operation panel after printing a document during Low Done
Power mode.
There is a case that C-E301(0xC0A2) occurs when SafeQ print is
30 ERBDFS1500861482 Done
performed.
While downloading FW, the Finisher and SD firmware may not be
31 ERBJTK1500806504 Done
installed properly and "Download N.G." will be indicated for them.
32 Expansion of acquisition data by CSRC Done
The trouble code C-2650 may occur after the MFP starts by turning
33 ERBJTS1500803876 the main power switch OFF and ON or returns from power save Done
mode.
When printing a job by using thick paper from bypass tray, the image
34 ERBTR_1400751134 Done
may be printed abnormally.
When printing a large number of print jobs from BOX with User
35 non-CSES No. Done
Authentication function, the trouble code: C-E301(B051) may occur.
The trouble code: C-E301(0xC052) may occur if Forward TX function
36 non-CSES No. Done
is used repeatedly with [Job Log Settings] is set to [Yes].
When [Public User Access] is set to [ON (Without Login)], and you
37 non-CSES No. log in to the MFP as a public user, the previous user's cookie Done
remains.
The message "SSD Download N.G. 99999" may be displayed when
38 non-CSES No. Done
you install the firmware.
The problem that Date/Time Settings of administrator settings is
39 ERBUS_1600879561 Done
displayed German notation.
Due to a lot of ARP packet, the operation panel keeps showing
40 ERSIND1600868915 Done
loading screen.
The problem that when printing a specific word file, staple doesn't
41 ERBAU_1600876667 Done
work.
After installed FW:GD4-K9, only Fax numbers are displayed to the
42 ERBJTG1600878390 Done
destination column in Fax/Scan screen
The problem that staple doesn't work when printing 51 sheets or
43 ERBJKG1600876219 Done
more of B4 size.
The problem that printing speed is slow when printing by PS mobile
44 ERBHK_1600877907 Done
(iOS) or sending PDF via LPR command.
45 ERCW__1600878821 The garbled output occurs when printing from SAP. Done
The problem that certificate that expiration date is after 2038 cannot
46 ERGRA_1600878966 Done
use.
[Uji City Hall] There is a case that C-E301(0xC34D) occurs in a
47 ERBJOS1600879492 Done
machine that Job log function is set.
48 ERBJSL1600870011 Request to disable image log transfer when save to ID & Print box. Done
54 ERBDFS1600876511 SSL sessions cannot be performed after installing Windows Update. Done
* Company names and product names in this document are the registered trademarks for respective companies.