Professional Documents
Culture Documents
Properties Page 1 of 3
Core Loss
Grade
Thickness Assumed
Resistivity
mm
Density
-cm
(in.)
kg/dm 3
50Hz
50Hz
60Hz
60Hz
1.0T 1.5T 1.0T 1.5T 1.0T 1.5T 1.0T 1.5T B10 B25 B50 B100
35JN200
7.60
59
0.85 1.98 1.05 2.50 0.39 0.90 0.48 1.13 1.46 1.54 1.64 1.76
35JN210
7.60
59
0.85 2.05 1.05 2.55 0.39 0.93 0.48 1.16 1.47 1.57 1.65 1.77
35JN230
7.60
55
0.89 2.10 1.10 2.60 0.40 0.95 0.50 1.18 1.47 1.57 1.66 1.78
35JN250
7.60
54
0.93 2.25 1.20 2.75 0.42 1.02 0.54 1.25 1.48 1.57 1.66 1.78
7.65
54
1.00 2.40 1.25 2.95 0.45 1.09 0.57 1.34 1.48 1.58 1.67 1.79
35JN300
7.65
51
1.10 2.60 1.40 3.20 0.50 1.18 0.64 1.45 1.50 1.59 1.68 1.80
35JN360
7.65
47
1.25 2.95 1.60 3.60 0.57 1.34 0.73 1.63 1.51 1.61 1.69 1.81
35JN440
7.70
38
1.45 3.40 1.77 4.23 0.66 1.54 0.80 1.92 1.53 1.62 1.71 1.82
50JN230
7.60
59
0.95 2.25 1.22 2.93 0.43 1.02 0.55 1.33 1.48 1.57 1.66 1.78
50JN250
7.60
55
1.00 2.40 1.30 3.05 0.45 1.09 0.59 1.38 1.49 1.57 1.67 1.79
50JN270
7.60
55
1.05 2.50 1.35 3.17 0.48 1.13 0.61 1.44 1.49 1.57 1.67 1.80
50JN290
7.60
54
1.08 2.60 1.40 3.25 0.49 1.18 0.64 1.47 1.49 1.58 1.67 1.79
50JN310
7.65
54
1.15 2.70 1.45 3.35 0.52 1.22 0.66 1.52 1.49 1.59 1.67 1.79
7.65
51
1.30 3.00 1.64 3.75 0.59 1.36 0.74 1.70 1.50 1.59 1.68 1.80
35JN270
50JN350
50JN400
0.35
(0.0138)
0.50
(0.0197)
7.65
47
1.45 3.25 1.85 4.05 0.66 1.47 0.84 1.84 1.52 1.61 1.69 1.81
50JN470
7.70
38
1.65 3.65 2.10 4.65 0.75 1.66 0.95 2.11 1.54 1.63 1.71 1.82
50JN600
7.75
32
2.00 4.50 2.50 5.62 0.91 2.04 1.13 2.55 1.52 1.61 1.70 1.81
50JN700
7.80
28
2.52 5.50 3.30 6.90 1.14 2.49 1.50 3.13 1.55 1.65 1.73 1.84
50JN800
7.80
24
2.95 6.30 3.65 8.00 1.34 2.86 1.66 3.63 1.57 1.66 1.74 1.84
50JN1000
7.85
18
3.25 7.20 4.15 9.15 1.47 3.27 1.88 4.15 1.59 1.69 1.75 1.85
http://www.jfe-steel.co.jp/en/products/electrical/n_core/02.html
6/26/2011
JFE Steel Corporation - Products and Services - ELECTRICAL STEEL SHEETS - JFE N-Core Typical Electrical and Magnetic Properties Page 2 of 3
50JN1300
7.85
15
3.75 8.10 4.75 10.20 1.70 3.67 2.15 4.63 1.58 1.67 1.76 1.87
65JN800
7.80
28
3.25 7.00 4.20 8.90 1.47 3.18 1.91 4.04 1.56 1.64 1.72 1.82
7.85
15
4.90 9.90 6.15 13.00 2.22 4.49 2.79 5.90 1.57 1.67 1.76 1.86
0.65
65JN1600 (0.0256)
Note :1. Values above were measured according to the method JIS C 2550 (2000).
2. Test samples were consisted of half the strips sheared parallel and half sheared transverse to the rolling
direction.
3. W15/50 indicates the core loss at 50Hz and 1.5T. B50 indicates the magnetic flux density at 5000A/m.
4. The specimens were tested as sheared.
5. The values shown above are the typical ones, not for guarantee.
Core Loss
Magnetic Flux Density
T
Grade
Thickness Assumed
Resistivity
mm
Density
-cm
3
(in.)
kg/dm
35JNE230
7.65
55
0.98 2.15 1.20 2.70 0.44 0.97 0.54 1.22 1.51 1.59 1.69 1.82
7.65
47
1.02 2.30 1.27 2.90 0.46 1.04 0.58 1.31 1.53 1.60 1.70 1.83
7.70
41
1.14 2.60 1.42 3.25 0.52 1.18 0.64 1.47 1.54 1.65 1.72 1.85
7.65
47
1.18 2.70 1.51 3.45 0.53 1.22 0.68 1.56 1.53 1.61 1.70 1.83
7.70
41
1.41 3.10 1.80 3.95 0.64 1.41 0.82 1.79 1.55 1.64 1.73 1.85
7.75
36
1.43 3.20 1.81 4.00 0.65 1.45 0.82 1.82 1.56 1.65 1.74 1.86
60Hz
60Hz
1.0T 1.5T 1.0T 1.5T 1.0T 1.5T 1.0T 1.5T B10 B25 B50 B100
0.35
35JNE250
(0.0138)
35JNE300
50JNE300
50JNE350
50JNE470
0.50
(0.0197)
Note :1. Values above were measured according to the method JIS C 2550 (2000).
2. Test samples were consisted of half the strips sheared parallel and half sheared transverse to the rolling
direction.
3. W15/50 indicates the core loss at 50Hz and 1.5T. B50 indicates the magnetic flux density at 5000A/m.
4. The specimens were tested as sheared.
5. The values shown above are the typical ones, not for guarantee.
Core Loss
Grade
Resistivity
Thickness Assumed -cm
mm
Density
http://www.jfe-steel.co.jp/en/products/electrical/n_core/02.html
60Hz
50Hz
60Hz
400Hz
6/26/2011
JFE Steel Corporation - Products and Services - ELECTRICAL STEEL SHEETS - JFE N-Core Typical Electrical and Magnetic Properties Page 3 of 3
(in.)
20JNEH1200
0.20
20JNEH1500 (0.0080)
kg/dm3
1.0T
1.0T
7.65
55
11.0
4.85
1.78
7.65
47
12.5
5.67
1.79
Note :1. Values above were measured according to the method JIS C 2550 (2000).
2. Test samples were consisted of half the strips sheared parallel and half sheared transverse to the rolling
direction.
3. W15/50 indicates the core loss at 50Hz and 1.5T. B50 indicates the magnetic flux density at 5000A/m.
4. The specimens were tested as sheared.
5. The values shown above are the typical ones, not for guarantee.
Core Loss
Grade
Thickness Assumed
Resistivity
mm
Density
-cm
(in.)
kg/dm 3
60Hz
60Hz
1.0T 1.5T 1.0T 1.5T 1.0T 1.5T 1.0T 1.5T B10 B25 B50 B100
50JNA300
7.75
36
1.21 2.66 1.55 3.44 0.55 1.21 0.70 1.56 1.59 1.66 1.74 1.86
50JNA350
0.50
50JNA500 (0.0197)
7.80
32
1.40 3.10 1.88 4.05 0.64 1.41 0.85 1.84 1.60 1.68 1.75 1.86
7.80
20
2.08 4.60 2.60 6.02 0.94 2.09 1.18 2.73 1.59 1.68 1.74 1.84
50JNA600
7.85
17
2.30 5.10 3.00 6.65 1.04 2.31 1.36 3.02 1.60 1.67 1.75 1.86
Note :1. Values above were measured according to the method JIS C 2550 (2000).
2. Test samples were consisted of half the strips sheared parallel and half sheared transverse to the rolling
direction.
3. W15/50 indicates the core loss at 50Hz and 1.5T. B50 indicates the magnetic flux density at 5000A/m.
4. The specimens were tested after stress relief annealing.
Annealingcondition: 750C (1380F) 2hrs. under neutral atmosphere.
5. The values shown above are the typical ones, not for guarantee.
http://www.jfe-steel.co.jp/en/products/electrical/n_core/02.html
6/26/2011