Professional Documents
Culture Documents
MANAGEMENT
Battery Distribution Cluster Battery Distribution Cluster Battery Disconnect Switch
Single Outboard Motor Dual Outboard Motor Used in battery distribution clusters.
The Single Engine Battery Distribution Dual Engine Battery Distribution Tested to UL 1107 and rated at 275A
Cluster includes dedicated battery Cluster has the same features as the continuous, 455A intermittent, and
switches for each bank and a voltage Single Cluster but designed for twin 1250A cranking. Each switch has four
sensitive relay (VSR). The VSR allows engine installations. The assembly removable sides suitable for up to 1/0
for two or more batteries to be charged includes Port Start, Starboard Start, wire size for easy cable attachment.
at the same time. When the engine is Emergency Parallel and House battery Requires 3/8-inch (10mm) terminal
started and the start battery reaches switches, and two voltage sensitive connector.
13.7V, the relay closes combining relays.
batteries allowing them to be charged
Battery 33100-ZY3-000AH
simultaneously. A red LED indicator Disconnect Switch
light on the VSR will turn on when in Battery 33300-ZY3-010AH
Distribution
the closed charging mode. When the
Cluster, Dual
engine is stopped and the voltage Outboard Motor
drops to 12.8V, the relay will open
separating the batteries. This
eliminates the possibility of draining the
wrong battery and also protects
sensitive electrical equipment from
harmful engine start-up spikes.
Measures 51 ½” x 5 ½” x 3 ¼”.
Battery 33200-ZY3-010AH
Distribution
Cluster, Single Battery Distribution Studs
Outboard Motor
Kit includes 2 each — 3/8” (10mm)
studs mounted in a plastic housing with
removable access doors for unlimited
Battery Distribution Cluster
battery cable routing options. Used to
Triple Outboard Motor connect additional battery cables to
Triple Engine Battery Distribution extend the length of the standard
Cluster has the same features as the engine battery cable.
Dual Cluster but is designed for triple
engine installations. The assembly Studs are tin-plated copper with tin-
includes Port Start, Center Start, plated brass nuts with stainless steel
Starboard Start, Emergency Parallel lockwashers. Plastic housing is high
and House battery switches, and three temperature and impact rated
polycarbonate. Kit includes stainless
voltage sensitive relays.
steel mounting hardware.
Battery Charger/Maintainer
Battery PAL Magnum charger is UL
listed. It is perfect for battery storage or
Battery Tender—Indoor for boat and personal watercraft battery
Maintains fully charged battery without charging. Charges at a 3 amp rate and
overcharging. switches automatically to 25-60 mA
when battery voltage reaches
Includes: 2 alligator clips and quick approximately 13.5 volts. The battery
disconnect plug. 6 foot power cord with charger uses red and green LED lights
65 inch charging cord. to indicate charge or maintenance
functions. Built-in overload protection.
Completely waterproof body. Mounts to
Battery Tender— 31670-HPE-001
the wall near an AC outlet. AC cord is
Indoor (not for sale
19 inches long. DC output cords with
in California or 25 Ft. Extension Cord
Oregon; see P/N alligator clips are 4 feet long.
Extends the length of the charger’s
31670-BMS-004)
reach from 12 feet to 37 feet. Works
with both indoor and outdoor battery Battery Charger/ GUEST-2603
Maintainer
tenders. Package includes 4 cords.