Professional Documents
Culture Documents
Buzzer & Display(optional)---------------------------- Function test after installation----------------------- 16 4. It is strongly recommended to check the position
3
Parking Assist of the sensors before the actual drilling of the
self-test function ----------------------------------------- 3 Installation diagram-------------------------------------- 17 holes.
Learning function ---------------------------------------- 4 Troubleshooting------------------------------------------ 20 System 5. Perform test after finishing the installation.
Automatic car mute function ------------------------- 4 Warranty terms-------------------------------------------- 20
User's Manual
2/4-sensor automatic recognition ------------------ 4 Warranty card---------------------------------------------- 21
Attention----------------------------------------------------- 7
Disclaimer
Sensor maintenance ------------------------------------ 7
The parking assist system is designed as a driver
assistance device, and should not be used as a
substitute for safe parking practices. The area into
which the vehicle is driving or to be reversed must
be constantly visually monitored while parking.
1
About the product Key features Buzzer & Display (optional)
Parking assist system is an ultrasonic distance 4 front sensor system The alert buzzer can be upgraded to display. These pictures are for reference only, the actual
monitoring system. It electronically detects the area Buzzer can be upgraded to LED/LCD displays display may vary.
in front of your vehicle while parking, and alerts you
Can also work as a 2-sensor system Only some displays have set button or digital indication. Digital indicator and volume
with audible tones if the system detects an obstacle.
Compatible with front metal bar adjustable function depend on the display you choose.
The system will show the accurate distance in
meters or feet (upgrade to LED/LCD display). Automatic car audio mute function
This product is 4-sensor systems for front bumper Self-test function
protection. They can also work as 2-sensor systems. Anti-false alert technology
Combined with functions such as automatic audio All weather design(-40°C/-40°F ~ +85°C/185°F)
mute, self-test and learning function, they are ideal Buzzer
for cars with front metal bar.
LED display (optional) LCD display (optional)
This product can upgrade to displays, The modern
display can be easy to install on the dashboard or
on top of the rear-view mirror.
Each part of this product has passed the most
stringent test before releasing to the market. It is Technical specifications
reliable at a wide temperature range (-40°C/-40°F
~ +85°C/185°F) and becomes very useful when
you are parking in poor weather conditions. Input voltage: 9~16V DC
Operating current: <250mA
With the help of our parking assist system, you can Self-test function
enjoy a convenient and easy parking experience. Sensor installation height: 45~60cm
Detection range: 0.3m/1.0ft~0.9m/2.9ft
Operating temperature: -40°C ~ +85°C
1. All sensors are working normally 2. Damaged sensor is detected
-40°F ~ +185°F
Buzzer SPL: 70~90dB No beep
Be...Be...Be...
* Beep three times.
* Other sensors keep working.
2 3
Learning function How does the system work
Turn ignition on, press footbrake and connect the green learning wire to a +12V power supply (i.e. pink wire Driving forward, press footbrake
in the fuse connector). The system will perform learning procedure.**
The buzzer will give 2 audible tones. This indicates that the
Be Be learning function is successful and the system will ignore the front
protrusion. Then disconnect the green wire and insulate it.
Note: if the vehicle does not have front metal bar or other front protrusion, the above procedure is not needed.
When reverse gear is engaged, the system will This 4-sensor system can be used as a 2-sensor
automatically mute the car audio. system.
This function aims to help the driver to reverse This has to be done by connecting the 2 central
safely without distraction. sensors (F&G) or 2 outside sensors (E&H).
No beep Be Be Be
4 5
Attention Sensor maintenance
6 7
Brief installation diagram
Parking light
12V
Parking Assist
System ACC
Buzzer
Installation Manual Footbrake
ECU
8 9
Packing list Sensor installation
H > 45cm/1.5ft
H < 60cm/2.0ft
Manual
* The actual sensor and display may vary from the image shown above
Installation tools
1.5m/5.0ft
L1 L2 L1
35cm/1.2ft<L1<45cm/1.5ft
1.0m/3.3ft 50cm/1.6ft<L2<76cm/2.5ft
45cm/1.5ft<H<60cm/2.0ft
30' ~ 60'
109 11
2 3 4
Check the size of the hole
saw packed in the product
matches the diameter of
the sensors before drilling
any holes.
E
F
G
H
12 13
Buzzer installation
6 A
H H
G G
F F
E E
14 15
Function test after installation Installation diagram
4 sensor system
(Optional)
or
Fuse
Pink (ACC)
Jump switch for audio mute Red (Reversing light +12V)
White (Footbrake light + 12V)
Positive output (+) Blue (Audio mute wire)
Negative output (-) Green (Learning function wire)
Function test is possible by
holding a wooden board (30 Black (GND)
x100cm/1x3.3ft) standing at
1.0m/3.3
ft the front of the car, and drive ECU
the car forward and
backward to test each
function respectively as
shown in this manual.
Note:
4 sensors display range: 0.3m/1ft ~ 0.9m/3.0ft.
ft
1.0m/3.3
16 17
2 sensor system 2 sensor system
(Optional) (Optional)
or or
Fuse Fuse
Pink (ACC) Pink (ACC)
Jump switch for audio mute Red (Reversing light +12V) Jump switch for audio mute Red (Reversing light +12V)
White (Footbrake light + 12V) White (Footbrake light + 12V)
Positive output (+) Blue (Audio mute wire) Positive output (+) Blue (Audio mute wire)
Negative output (-) Green (Learning function wire) Negative output (-) Green (Learning function wire)
ECU ECU
Note: Note:
E & H sensor display range: 0.3m/1ft ~ 0.8m/2.6ft. G & F sensor display range: 0.3m/1ft ~ 0.9m/3.0ft.
18 19
Troubleshooting Warranty terms
After installation, the system doesn't work The unit is warranted for a limited period of time
a) Are all wires connected properly? from the date of purchase. In the unlikely event b) Damage to the system caused by accident or
b) Is the vehicle's ignition ON? of a defect arising in this product when used in improper use in any manner whatsoever not
c) Is the footbrake pressed? accordance with the manufacturer's instructions, the fault, including but not limited to damage
the parts would be repaired or replaced free of by water or as a result of excess voltage applied
Damaged sensor detected charge. to the system or if misused or repaired or altered
a) Are all sensors plugged into the ECU correctly a) It is required to show warranty card when in any way other than by or it's authorized agent.
and tightly? making any warranty claims. c) False information displayed in the panel of the
b) Is the sensor wire broken? b) The model and the unit's serial number must dash board that is caused by car with CAN bus
c) Is the sensor covered by mud or snow? be the same as the information on the warranty system.
d) Is the sensor damaged? card.
21
20