Professional Documents
Culture Documents
Shipping is changing drastically and not all changes are liked by shipowners, ship managers, and seafarers.
But if there was one change that is being welcomed by all is this…
Shipping industry now takes every personal injury or death very seriously.
For tanker operators, the oil Majors even require a death onboard any of their vessels to be reported to them.
The KPI for Personal injuries and deaths need to be set to zero, an absolute zero.
But one area where we keep hearing about the loss of life or injuries for that related to embarking and disembarking of pilots.
We keep hearing the tragic news of the death of pilots while embarking and disembarking from the ships.
All of these accidents are avoidable.
Well, we can ensure that the boarding arrangements are adequate and safe for pilot embarkation and disembarkation.
The principle requirement for the pilot ladders is governed by Regulation 23, chapter V of the SOLAS.
There are few other references that talk about the construction of pilot ladders.
But if we need to bring the accidents due to pilot ladders to zero, we need to address three things.
We need to ensure that pilot ladders onboard are made of the required material and as per the guidelines
We need to make sure that the pilot ladders are maintained properly
We need to make sure that the pilot ladders are used or rigged correctly
The first requirement is that the pilot ladder need to be certified by the manufacturer.
This means that the pilot ladder now no more can be made by the ship staff.
These need to be supplied and the manufacturer need to certify these to be complying with the SOLAS.
Side ropes
All these requirements are clearly defined in the IMPAHQ poster that all the vessels are required to have on the bridge.
Requirements for the maintenance of Pilot ladders
As per SOLAS ch V/Reg 23, all pilot ladders used for pilot transfer shall be clearly identified with a tag or other permanent marking.
The marking could be by attaching a piece of canvas and stenciling the number on it.
Other SOLAS requirement is that the appliances shall be kept clean, properly maintained and regularly inspected.
The inspection of pilot ladders needs to be done as per the PMS routine of the company.
But what do we mean by properly maintained and what can we do to ensure that pilot ladder is appropriate for the use?
1. Ropes
The first thing that needs to be checked is the condition of ropes.
Most of the pilot ladder incident that occurs is usually because of the parting of either the ladder rope or the side ropes.
Why do these rope part and what can be done to avoid this?
Manila rope has an absorbing quality which ensures that the rope is always non-slippery.
That makes it the first choice for the purposes like stage rigging and use in the making of pilot ladders.
But this quality is also a concern when it comes to absorbing seawater and sunlight which may harden it or rot it over a longer period of exposure.
A manila rope which might look in excellent condition but which has been exposed to sunlight, sea water or even chemicals might have lost its
internal strength.
Negligence of the seafarers to inspect and discard any obvious damaged rope and pilot ladder is one thing.
But a bad rope with the excellent visual condition can also be the cause of pilot ladder ropes giving way.
The best way to avoid degrading of the pilot ladder rope is to minimize its exposure to seawater, sunlight, and chemicals by securing it nicely when
not required.
However considering that the visual inspection of manila ropes used in the pilot ladder can sometimes give a false indication of its condition &
strength, I am personally of the opinion that pilot ladder should be changed with a new one after a fixed interval of time, irrespective of its condition.
2. Steps
At an interval required as per the PMS of the ship, the pilot ladder should be opened up and laid on the deck.
The close inspection of each of the pilot ladder steps must be made to identify any steps that show the early signs of cracking.
Apart from that, each step must be secured firmly and should be straight and not inclined towards any side.
And the first thing that needs to be considered is the location of the pilot ladder deployment area.
within the parallel body length of the ship and as far as practicable, within the midship half length of the ship
Each step must rest firmly against the ship’s side.
The second consideration is how the pilot ladder is secured to the ship.
If the pilot ladder is stored on a winch, the pilot ladder must not be hanging from the winch. This must be secured on the deck with the shackles.
When the freeboard of the ship is more than 9 meters, we are required to use the combination arrangement for pilot embarking.
In this case, the pilot ladder and manropes need to be secured at a point about 1.5 meters above the bottom platform of the accommodation ladder.
This is usually achieved by attaching portable magnets the ship’s side and securing the pilot ladder to these magnets.
There are a few other points that we need to be aware of while securing the pilot ladder.
Pilot ladder needs to be secured with appropriate shackles to a strong point on the deck. Use of ropes to secure the pilot ladder is a big no-no.
The crew must check that the pilot ladder step is not resting on the fish plate. This can snap down once someone puts his weight on the pilot ladder.
In fact, any of the pilot ladder steps must not be resting on any of the ship’s structure.
The pilot would be lucky if he gets warning for inappropriate securing of the pilot ladder after climbing for a few steps.
There have been incidents where the pilot ladder step snapped down and the pilot fell from a considerable height.
Access to deck
Once the pilot boards the ship the area where he would keep his first few steps need to be clear.
IMO Resolution A. 1045(27) gives the dimension of this area that needs to be kept clear of any obstructions.
The dimensions of the are that need to be kept clear are
Conclusion
In layman’s mind, the embarking and disembarking of pilot would be a routine and non-risky task.
All these incidents can be avoided by having a set of best practices related to use of pilot ladders.
Pilot ladders onboard should be of correct specification and ship staff should have certificates for the pilot ladders onboard.
Exposure to sunlight and seawater should be minimised as far as possible. On longer voyages, the pilot ladder should be kept under shelter such as
in deck store.
The condition of ladder ropes, steps as well as other fittings should be checked at least monthly and before use.