You are on page 1of 3
CONCRETE MIX DESIGN DATA Project : AHM PLANT 6 Contractor _: PT. TOTAL SOLUSI KONSTRUKSI PT. ADHIMIX RMC INDONESIA PLANT DELTAMAS ‘TAHUN 2022 ‘ ADHIMIX RMC INDONESIA CONCRETE MIX DESIGN DATA PROJECT : AHM PLANT 6 CONTRACTOR __: PT. TOTAL SOLUSIKONSTRUKSI SPECIFICATION: Class of Concrete FC 25 NFA ‘Minimum compresive strength 25 MPa when tested at the age 28 days using O15 cm x 30 cm cylinder sample . Slump on site 12,0+/-2,0 em Maximum size of coarse aggregate 25 mm . MATERIAL Spec. Gravity Fine Aggregate Manufacturing Sand SSD 2.62 Coarse Aggregate Crushed Stones SSD 258 Cement Curah Type I ( Ordinary Portland Cement ) 3.5 Water 1.00 Additives TypeD (Retarder) 119 TypeF — ( Superplasticiser) 14 DESIGN CALCULATION ‘Water cement ratio 053 Free water required 182 kgim3 1820, dm3 Cement 343 kg/m3 109.0 dm Additives TypeD 1.03 kg/m3 087 dm3 TypeF 223 kgim3 197 dm3 Paste volume 293.8 — dm3 Aggregate volume 706.2 dm3 Fine Aggregate Manufacturing Sand 053 x 7062 x 208 = 976 kgim3 Coarse Aggregate 047 x 7062 x 258 = 860 kgim3 Bekasi, 06 September 2022 Approved By : Prepared By : Me ME ‘Tri Nugroho S Manager Plant AVENUE Office Tower Li. 26, JI. Raya Posor Minggu Kav. 16 | ADHIMIX Pancoran, Jakarta 12780 | Telp. (62-21) 7994 666 | Fox. (62-21) 799 1666 E-molt: beton@adhimix.co.id | Website: www.achimix.co.id, www.retailadhimixcoid | GROUP ADHIMIX RMC INDONESIA CONCRETE MIX DESIGN DATA PROJECT : AHM PLANT 6 CONTRACTOR 1 PT, TOTAL SOLUSI KONSTRUKSI SPECIFICATION —_: Class of Conerete : FC30NFA Minimum compresive strength 30 MPa when tested atthe age 28 days using O15 cm x 30 cm cylinder sample Slump on site 12,0+/- 2,0 em Maximum size of coarse aggregate 25 mm . Manager Plant MATERIAL Spee. Gravity ine Aggregate Manufacturing Sand ssD 262 Coarse Aggregate Crushed Stones SSD 2.58 Cement Curah Type ( Ordinary Portland Cement ) 315 Water 1.00 Additives TypeD (Retarder) 119 TypeF — ( Superplasticiser ) 114 DESIGN CALCULATION Water cement ratio 047 Free water required 187 kg/m3 187.0 dm Cement 402 ky/m3 127.7 dm3 Additives TypeD 1.21 kg/m3 1.02 dm3 Type F 2.82 kg/m3 248 ém3 Paste volume 318.2 dm3 Aggregate volume 681.8 dm3 Fine Aggregate Manufacturing Sand Ost x sla x 262 913 ke/m3 Coarse Aggregate 049 x «(6818x258 = 860 kg/m3 Bekasi, 06 September 2022 Approved By : Prepared By : LIAVENUE Office Tower Lt. 26, JJ, Raya Pasar Minggu Kav. 16 | ADHIMIX Pancoran, Jakarta 12780 | Telp. (62-21) 7994 666 | Fax. (62-21) 799 GROUP E-mail: beton@adhimik.co.ld | Website: www.adhimix.co.id, www.tetalladhimix.co.

You might also like