Professional Documents
Culture Documents
for Electronics
Industry
To ensure all facilities
and systems are well
maintained to deliver
efficient and reliable
performance.
Power quality analyzer
Application:
• Capture transient with high sampling frequency
• Uncovering hard-to-find or intermittent issues from VFD drive
• Discover the costs of energy loss specifically caused by poor power qual-
ity with the Energy loss calculator function.
• Measures harmonics and inter harmonics for voltage and current, as well
as unbalance, flicker and rapid voltage changes with high accuracy
• Calculates mechanical power and efficiency without mechanical
Benefits:
• One-touch reporting
• IEC61000-4-30 Compliance Class A
• Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for
use at the service entrance
• Quickly see how much money you’re losing due to energy waste in terms
of real dollars
Energy Loss calculator
Models 438-II
Specifications
Measure V, I, kW, Cos/DPF, kWhr •
Measure MIN/MAX and AVG values •
10-day logging •
Waste energy monetization •
THD measurement (V & I) •
Harmonics 1 to 25 for V & I •
Power harmonics •
Oscilloscope function •
Voltage dips and swells •
Comprehensive logging capability •
Advanced features Motor Load performance study
Models ii900
Specifications
Number of microphones 64 digital MEMS
Frequency band 2 kHz to 52 kHz
Operation distance range 0.5 to > 50 meters
Field of view 63°+/- 5°
Minimum frame rate 12.5 FPS
Resolution 1280 x 800(1,024,000 pixels)
Touchscreen Capacitive Air leak Detection for solve actuator Malfunction
Acoustic image SoundMap™ image
Image format .jpg or .png
Video format .mp4
Rechargeable batteries 02 with each lasting 6 hours
Standard palettes 3: Grayscale, Ironbow, Blue-Red
Warranty 2 years
Benefits:
• Good camera quality – 40mK thermal sensitivity and up to 640 x 480 resolution to capture better quality images
• See the details you need with optional smart lenses: 2x and 4x telephoto, wide angle and macro lenses
• Optimize images, generate customizable reports and export images to the format of your choice with Smart-
View® desktop software
• Subject to Export Control
Benefits:
• Handles fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms
• Uses features like autostep, custom units, user-entered values during test, one-point and two-point switch test-
ing.
• Creates and runs automated as-found/as-left procedures to satisfy quality programs or regulations, and records
and documents results
• Powers transmitters during test using loop supply with simultaneous mA measurement
Application:
• Check the voltage unbalance at the input terminals of the frequency speed drive so you can ensure the phase
unbalance is not too high
(> 6 to 8 %)
• help troubleshooting PLC characteristics of signals to diagnose potential issues and uncover root cause in a
straightforward manner.
• Verify the electrical signal quality in AS-i, CAN, Foundation Fieldbus H1, Profibus and RS-232/485
• Bus Health function, a user can provide a health check on a specific bus communication between the control unit
and a motor drive
Benefits:
• Dual-input digital oscilloscope and multimeter
• 40 MHz or 20 MHz oscilloscope bandwidth
• IntellaSet™ technology automatically and intelligently adjusts numerical readout based on the measured signal
• Recorder Event Detect captures elusive intermittent signals on repetitive waveforms up to 10 KHz
• Rugged design to withstand 3g Vibration, 30g shock, and rated IP51 according to EN/IEC60529
• Highest safety rating in the industry: safety rated for CAT IV 600 V
Models 810
Diagnostic Specifications
Unbalance, looseness, misalignment and bearing
Standard Faults failures
Motors, fans, blowers, belts and chain drives, gear-
boxes, couplings, centrifugal pumps, piston pumps,
sliding vane pumps, propeller pumps, screw pumps,
Analysis For rotary thread/gear/lobe pumps, piston compressors,
centrifugal compressors, screw compressors, closed
coupled machines, spindles
Motor Rotational Speed Range 200 rpm to 12000 rpm
Plain-text diagnosis, fault severity (slight, moderate,
Diagnosis Details serious, extreme), repair details, cited peaks, spectra
Benefits:
• Features Automatic Frequency Control (AFC) to minimize the effect of inter-
ference
Building grounding test
• Performs stakeless earth ground rod testing (two clamps)
• Provides R* measurement that calculates earth ground impedance at 55 Hz
to more accurately reflect the earth ground resistance that a fault-to earth
ground would see
• Features IP56 rating for outdoor use
• Offers adjustable limits for quicker testing
Models 1625-2
Specifications
3 / 4-pole / soil • Stakeless test method in the facility
Selective 1 clamp •
Stakeless 2 clamps •
2-pole •
Automatic Frequency Control (AFC) 94 Hz to 128 Hz •
R* measurement (55 Hz) •
Adjustable limits •
Memory •
AC leakage current •
Benefits:
USP battery test report
• Highest safety rating in the industry – CAT III 600 V, 1000 V dc max. rated
for safe measurements all around the battery power supply equipment.
• Easily import data from the Product to a PC. All measurement data, battery
profile and analysis information can be used to easily generate reports.
• Test the battery health condition with IEEE1188 standards.
Models BT521
Specifications
Battery resistance range (3 to 3000 mΩ) •
V dc ( 6V to 1000V) •
V ac (45 Hz to 500 Hz with 800 Hz filter) •
Frequency (displayed with V ac and A ac) •
AC voltage ripple (20 KHz max) •
Temperature •
Interactive Test Probe set, with •
Extender •
Temperature •
Meter mode •
Sequence mode •
Singapore
Fluke South East Asia Pte Ltd
www.fluke.com/en-sg
Address: 1 Clementi Loop, #06-02/03/04, Singapore 129808
For sales / product enquiry: +65-6799-5566 / fsea.info@fluke.com
For servicing and calibration: +65-6799-5588 / service.asean@fluke.com
Malaysia
Fluke Electronics (M) Sdn Bhd
www.fluke.com/en-my
Address: Suite D-3A-4, Level 3A, Block D, South Gate Commercial Centre, No. 2, Jalan Dua Off Jln Chan Sow Lin, 55200 Kuala Lumpur
For sales / product enquiry: +60-3-9223-1216 / fsea.info@fluke.com
Indonesia
BUT. Fluke South East Asia Pte Ltd
www.fluke.com/id-id
Address: South Quarter Building Tower C, Level 10, #10-10B, Jl. R.A. Kartini Kav. 8, Jakarta Selatan, Indonesia
For sales / product enquiry: +62 21 5098 2621 / fsea.info@fluke.com
Vietnam
Representative office of Fluke South East Asia Pte Ltd
www.fluke.com/vi-vn
Address: 3rd Floor, VOV Building, 07 Nguyen Thi Minh Khai Street, Ben Nghe Ward, District 1, Ho Chi Minh City, Vietnam
For sales / product enquiry: +84-28-2220-5371 / fsea.info@fluke.com
Philippines
www.fluke.com/en-ph
Thailand
www.fluke.com/en-th
www.linkedin.com/company/fluke-southeastasia
www.instragram.com/fluke.sea
10