Professional Documents
Culture Documents
Trio 330 Catalogo
Trio 330 Catalogo
TRIO 330
The framed panel formwork
for heights of up to 3.30 m
3.30
2 ties up to 3.30 m
product range 4.30
TRIO 330_gb_ma 09.08.2006 8:30 Uhr Seite a2
TRIO 330
3
The framed panel formwork for
floor heights up to 3.30 m
TRIO 330 is an independent form-
work system with only 6 panel
sizes.
TRIO 330 has a symmetrical and 1 TRIO 330 and TRIO 270 can be
3.30
asymmetrical tie arrangement; used opposite each other.
enabling ties to be placed horizontally
or vertically. 2 TRIO 330 provides for the best
Incorrect erection is eliminated. surface finishes with the hig-
hest fresh concrete pressure. 2
TRIO 330 only requires one part for *With only 2 ties in a height of
all connections: the BFD alignment up to 3.30 m TRIO 330 complies
coupler. with DIN 18202, Table 3, Line 7 1
(German acronym for fastening, under a fresh concrete pressure
aligning and tightening) of 82.5 kN/m2.
3.30
alignment, eliminating faulty
erection.
2.70
2.70
*These values were calculated according to
the guidelines for issuing seals of approval
for framed panel formwork by the seal of
approval protection association for concre-
te formwork e.V. GSV.
TRIO 330
Clearly visible:
Only 2 ties are required for con-
creting heights of up to 3.30 m.
2
TRIO 330_gb_ma 09.08.2006 8:30 Uhr Seite 1
60
TRM 72
30
TE
60
25
24
TRM 72
TE
WDA 5 (6)
3
TRIO Steel Panels, h = 3,30m
Weight kg Item no.
150
300
575
300
1175
300
300
300
ø 24
3300
300
300
150
75 75
300
ø 24
1650
680
300
300
575
120
300
150
150 100 100 150
Detail: ø 20
77
Levering corner
300 300
300
25 25
ø 24
3300
3300
ø 24
120
ø 27
Detail:
The tapered tie hole allows
the tie to be angled at 6° in 75
any direction.
112,5 112,5
Levering corner Also with levering corner as
from the year 2002
4
Weight kg Item no.
900 600
3300
3300
Also with levering
corner as from the year 2002
720 720
300 300
300
37
600
23
600
3300
3300
300
300
300
600
300
5
Weight kg Item no.
120
For 90° inside corners.
Fitted with 18mm Finply fomlining.
300
Articulated Corner TGE/4 330 = 1,98m2 121,00 054414
120
For oblique angles from 75°, used internally
300
and externally. 300
300 584
33 292 33
290
300
575
575
300
300
1175
1175
300
300
300
300
300
300
ø 24
175
3300
3300
300
125
300
300
300
300
1650
1650
300
300
300
300
575
575
310
300
570
570
900
1170
1170
ø 24
3300
3300
1650
1650
50
1170
900
570
570
430
150
150
6
Weight kg Item no.
455
100
to shafts. Height extendable.
Complete with:
Pin 20x140, galv. and Shuttered
Cotter Pin 4/1 (7x/5x). 240
575
100
1200
600
1500
480
3300
3300
900
Struck
1080
2125
1200
55
1650
1200
25
575
569
297
Load-bearing point 300mm panel
Permissible load: 2000kg 600/720/900/1200mm panel
Detail TPP
51
(27)
21
32
98 (92)
66
3300
60
Detail TPA
36
21
96
60
50
7
Rückseite_englisch 07.08.2006 10:51 Uhr Seite 1
VARIO GT 24 MULTIFLEX
Wall, column formwork Girder slab formwork
UP Rosett Plywood
Modular scaffolding Site equipment
Brace frames
UP Rosett Formwork accessories
Shoring Custom forms
PERI GmbH
P.O. Box 12 64
89259 Weissenhorn
Tel.: 0 73 09 / 9 50 -0
Fax: 0 73 09 / 9 51 -0
info@peri.de
www.peri.de
D