Professional Documents
Culture Documents
Dragonlock Minis Instr v1
Dragonlock Minis Instr v1
Welcome to the DRAGONLOCK Miniatures collection. This instruction manual will outline some basic
materials you will need for 3D printing these models and links to additional resources.
For more information on getting started with 3D printing, help with choosing a printer, settings for many
popular printers, troubleshooting, and painting tutorials, please visit our Youtube channel:
https://www.youtube.com/channel/UC5Lbnd97HV3rU98gcwHklzQ
We have several videos speccifically on settings for printing your miniatures, and how to finish them here:
https://amzn.to/2HcIxS2
https://amzn.to/2XsRgoW
https://amzn.to/2SB0Geo
General printing tips for DRAGONLOCK Miniatures
Use good quality filament (we recommend eSun PLA Pro). While cheaper filaments work fine for terrain,
you need a good quality filament for the best results when dealing with miniatures.
We have Cura profiles for use on Creality Ender and CR series printers here:
https://www.dropbox.com/sh/aor4tnprppgy9tq/AAD6ltdb-HHkqBLT7LD3LaOZa?dl=0
When using files, don’t file too hard or for long When sanding, use sandpaper that can be wet as
periods as the resulting heat from the friction can the water will help cool the plastic and keep it from
soften and deform the plastic. softening due to the friction heat.
When gluing small parts like limbs apply the super Use flush cutters to clip off built-in supports and
glue on a separate surface, and use a toothpick to create a smoother edge that will require minimal
transfer a small drop. cleanup with files/sandpaper.
DRAGONLOCK™, DRAGONLOCK: Miniatures™, and Dragonbite™ are trademarks of Fat Dragon Games. @2019 Fat Dragon Games. All rights reserved.
For more information please visit: www.fatdragongames.com