Professional Documents
Culture Documents
Dragonlock Tile Short Roofs Instr
Dragonlock Tile Short Roofs Instr
Welcome to the DRAGONLOCK: Ultimate™ terrain system. This instruction manual will outline some
basic materials you will need for 3D printing these models, specific printing information for the models in
this set, and links to additional resources.
For more information on getting started with 3D printing, help with choosing a printer, settings for many
popular printers, troubleshooting, and more; please visit our 3D Printer forums:
http://fatdragongames.proboards.com/board/21/3d-printing-dragonlock-terrain
For painting tutorials on these and other models in the DRAGONLOCK: Ultimate™ product line, please
visit our Youtube channel:
https://www.youtube.com/channel/UC5Lbnd97HV3rU98gcwHklzQ
https://www.youtube.com/channel/UC5Lbnd97HV3rU98gcwHklzQ
https://www.facebook.com/groups/528423924186756/
http://www.fatdragongames.com
Before inserting a Dragonbite™ clip, you must first remove the printing support present in each slot on all four sides of every
model. We recommend using needle-nose pliers to gently twist the support out of place (always wear eye protection when using
tools.) Clips should be printed with 15-20% infill (but can be printed with 0%.)
To connect DRAGONLOCK™ Ultimate models together, simply insert a Dragonbite™ clip into the slot of one model, then slide
the adjoining model into the opposite side. In addition to the standard v3.0 clip, there is an optional thinner clip included. If your
clips are still too tight vertically, just scale them down a few % on the Z AXIS ONLY in your slicer.
Printing info:
Filament:
•We recommend using PLA (we use eSun PLA Pro and Hatchbox PLA in the FDG office)
Layer Height:
•All models: 200 micron/.2mm
Top/Bottom layers:
•5 layers or 1 mm
Infill:
•10% (15-20% for clips)
Rafts:
•None
Brim:
•None
DRAGONLOCK™, DRAGONLOCK: Ultimate™, and Dragonbite™ are trademarks of Fat Dragon Games. @2020 Fat Dragon Games. All rights reserved.
For more information please visit: www.fatdragongames.com
FDG0300 Dragonlock
Dragonshire Tile Short Roofs
Roof_Short_Front_Center_Stone_A Roof_Short_Center_1x1_T
Roof_Short_Front_Center_Wood-
frame_A
Roof_Short_Center_1x1_X
Roof_Short_Front_Center_Stone_B Roof_Short_Front_Center
Woodframe_B
Roof_Short_Center_1xhalf_inch Roof_Short_Center_1x1_V
Roof_Short_Center_1x1_Peak
Roof_Short_Center_2x1 Roof_Short_Center_2x2
Roof_Short_Front_Riser_Stone
Roof_Short_Center_2x2_T Roof_Short_Front_Center
Stone_2i
Roof_Short_Center_2x2_V
Roof_Short_Center_2x4
Roof_Short_Center_2x2_Peak
Roof_Short_Front_Riser_Wood-
frame_
Roof_Short_Center_2x2_L
FDG0300 Dragonlock
Dragonshire Tile Short Roofs
Roof_Short_Corner_2x2 Roof_Short_Side_2x2 Roof_Short_Front_Woodframe_A
Roof_Short_Side
2xhalf_inch
Roof_Short_Side_2x1 Roof_Short_Inside_Corner_2x2
Roof_Short_Front_Center_Wood-
frame_2i
Roof_Short_Front_Woodframe_B
Roof_Short_Side_2x4
Roof_Short_Front_Stone_B
Roof_Short_Front_Stone_A
Roof_Short_Center_2x2_X
Roof_Short_Center_2xhalf_inch
FDG0300 Dragonlock
Dragonshire Tile Short Roofs
Roof_Short_End_2i_Inside
Roof_Short_End_2-5i_B Corner_A
Roof_Short_End_2i
Roof_Short_End_2-5i_A Roof_Short_End_2i_Inside
Corner_B
Roof_Short_End_2-5i_C Roof_Short_End_3i_A
Roof_Short_End_3i_B
Roof_Short_End_2-5i_D
Roof_Short_End_2i_Outside
Roof_Short_End_DoubleAngle_A Corner_B
Roof_Short_End_DoubleAngle_B Roof_Short_End_2i_Outside
Corner_A