You are on page 1of 1

0PRATE FUEL, LUBRICATION, BALLAST AND OTHER PUMPING SISTEM AND ASOSIATED

CONTROL SISTEMS

Air leake in to packing= a water seal line to the


Basic procedure= A responsible person
Bungkering prosedur for= Continues
Bungkering prosedur on=the bunkering flag
During marpol by PSC= An oil film
During marpol by port state=The oily water
Here are some capacities of=140 mᶾ/hourse X 30 metres
Here are same capasities=5 m3/hourse X 25 metres
How are bigle well “W”= By perforated plating
How is the opening= By spring
How is air leak= A water seal line to the packing
If the heated medium of= Carbon formation
If you find it difficult to= All of thiese.
If you have a fuel= Zero (0)
In the event of amajor oil= he would lose his job
Prior to bunkering= Do a complete sounding of all
Telephones are being= Stop the bunkering until
To avoid over bunkering= Continuously monitor remote gauge reading
Under ISM,during= All activities concerning the safety(SMS)
Under ISM,the company= By chart and/or job description
Under ISM,what kind= Adequate resources and shore
Under OPA-90= An English speaking person avable on
What are item “S”= Strainer to stop dirt from entering the
What are item “V”= Non-return screw dwon valves
What is show top right= An eye bolt
What is the usual= 85 degre C
What is this component called= A lion return valve
What rigging= A wire sling
What type of screw is number 4= A round head screw
What type of valve are fitted= Non-return screw dwon valves
What type of pump do you= A piston pump
What are items “W”= Cargo hold bilge wells
What type of filters are=Perforated plate filters
What is item “5”= A mesh type strainer
What are items “S”= Strainer to stop dirt from entering
When bunkering through= blank flanges should be
When are the high sea= when the ship is shallow water
When planning bunkering= To minimize the risk of incompatibility
Whe you start a purifier=A magnetic coupling
Which of the parts is the pump shaft= No 2
Which way does the fluid= C from to B
Why do main engine makers= To improve sealing surface
Why is omportant= To ged the oil in to the cylinder when the
Why are conventional=Because the cargo holds are cleaner
Why is it necessary=To avoid the intrudaction
You are in charge of a night= Stop bankering,and establish
You have checked= Clean the system and change the oil

You might also like