Professional Documents
Culture Documents
Thank you very much for having purchased TODA Crankshaft and connecting rod.
Before using the product, please carefully read the hereunder instructions and the manufacture's service manuals.
○ Clearance check
Please confirm if there is enough clearance between pistons, connecting rods, crankshaft and cylinder block.
Be sure to check with trial assembling.
4.1kgf-m
Please put engine oil on the threads and seating face.
The mark on the rod section should be toward front of the engine.
○ When installing, use liberal amount engine oil or assembling paste on the parts.
(Don't use lubricating / penetrating oils such as WD40. Contact surfaces and thread parts can be damaged.)
○ Please refer to the service manual for the short block assembling.
○ Since our products and components are special in terms of their use and applications,
Toda Racing does not accept any claims and/or complaints of vehicles in which our products and/or components
are mounted.
Further, Toda Racing is not responsible for any damage. Because the product is exclusively for motor sports,
please understand that we do not accept to claims on principle.