Professional Documents
Culture Documents
99
Nr. 50093719 promag / dosimag
CV 5.0
Electromagnetic
Complementary data sheet
Flow Measuring System
Technical Information
• Promag 30 TI 026D/06/e
• Promag 30 (Model '99) TI 043D/06/en
• Promag 33 TI 027D/06/en
• Promag 39 TI 034D/06/e
Operating Manuals
• Promag 30 BA 008D/06/e
• Promag 30 (Model '99) BA 039D/06/en
• Promag 31 BA 019D/06/e
• Promag 33 BA 009D/06/en
• Promag 33 PROFIBUS BA 029D/06/en
• Promag 39 BA 024D/06/e
• Dosimag BA 023D/06/en
Endress + Hauser
Nothing beats know-how
Threaded Process Connections Mounting Set
Mounting Various process connections are avail- Other process connections (separate
Process Connections able for the Promag A and Dosimag A mounting set) are mounted onto the
sensors. These are mounted directly 1" thread adapter by the customer using
onto the sensor in the factory with four union nuts:
screws: • internal thread
• Tri-Clamp • external thread
• Flange connection (Promag A only) • PVC adhesive coupling
• 1" thread adapter (to which other • hose connection
process connections, consisting of a • weld nipple
seperate mounting set, are mounted).
Promag A
DN 2...25
Threaded process connections
(mounted in the factory)
Tri-Clamp
Dosimag A
DN 2...25
weld nipple
Note!
Seal profiles and materials depend on the selection
of process connection.
2
Replacing Seals with Replacing Seals with
Seal Replacement Threaded Process Connections Mounting Sets
Note! Note!
Note! Note!
Seals, and especially gaskets (aseptic Seals, and especially gaskets (aseptic
version), must be replaced periodically. version), must be replaced periodically.
The time between replacement depends The time between replacement depends
heavily on the cleaning intervals as well heavily on the cleaning intervals as well
as the fluid temperature and the clean- as the fluid temperature and the clean-
ing process. ing process.
Torques
Stainless steel
(1.4404 / 1.4435 / 8
316L)
Plastic
5
(PVC / PVDF)
Face-to-Face Lengths
Dimensions Sensor dimensions and face-to-face
lengths with various process connec-
tions are found in the appropriate
documentation (see specifications on
the front page).
3
Seal Set Determining the order code (example)
Product Structure
A seal set consists of either two Promag A
ENDRESS+HAUSER
or four seals: PROMAG A
sd033y02
de:
Order Code:
25 –– E
33AT25 H1
EH1BA41A21F
Ser.No.: 2X 123456
2X 1234
K-factor:
0.5328
0.5328/-5
Sizes DN8 1
DN8 1.4435 PN40 Dosimag A
Materials:
Materials PFA HAST-C V
Werkstoffe:
Werkstoff ®
130°C
TM max.
: IP67
08 DN 2 (1/12") to DN 8 (5/16") EPD/MSÜ R/B FSENDRESS+HAUSER
ECC
3
28 - 03
DOSIMAG A
SONDERPRODUKTE
DDAT08-E1A2A
Order Code:
15 DN 15 (1/2") Ser.No.: 3L 159753
20...30VDC 12W IP67
Code designation
for process connection
Subject to modification
Endress+Hauser
GmbH+Co.
Instruments International
P.O. Box 2222
D-79574 Weil am Rhein
Germany
Tel. (07621) 975-02
Tx 773926
Fax (07621) 975345
http://www.endress.com
Endress + Hauser
Nothing beats know-how
SD 033D/06/en/05.99
CV 5.0