Professional Documents
Culture Documents
Quick Guide LAN Connection For NMS Enatel SM36 - ENATEL
Quick Guide LAN Connection For NMS Enatel SM36 - ENATEL
2. Install UTP cable (connection Straight-Through) from Ethernet Port SM-36 to Port PC/Notebook
DOC QG-ENG-22012016
3. Setting IP PC/Notebook for Peer to Peer Connection
IP Default SM-36 : 010.010.005.010
Setting IP PC/Notebook : 10.10.5.11
4. Access Web base buka web browser insert IP Address at address bar (eg. 10.10.5.10) -> Enter
Password Log in , default password User Name : Admin, Pass : Admin1
DOC QG-ENG-22012016
5. Setting IP via Webbase,
- go to Network Setting , (following Customer Requirement) eg. IP : 192.168.5.10, Subnet Mask : 255.255.255.0
- for write setting to the SM-36, Click ICMP Ping Enabled -> Write ALL -> Reset Network Microcontroller
- Make sure Setting IP has ben update (see Network Setting and Network Connection Details must Same)
DOC QG-ENG-22012016
- After IP Setting SM-36, setting again IP PC for try PING connection or Peer to Peer Web Base
Eg : SM-36 IP : 192.168.5.10, Subnet Mask : 255.255.255.0
: PC IP : 192.168.5.11, Subnet Mask : 255.255.255.0
6. Capture Result Setting SM36 Via Webbase, and use the label sticker at the end of the cable. (LAN Cable SM-36)
DOC QG-ENG-22012016