Professional Documents
Culture Documents
SYSDRILL
Assembly Report
Assembly Description
Name No. Overall Length Acc. Length (m) OD (in) ID (in) Weight (lb/ft) Acc. Weight (klb)
(m)
5in DP to Surface 1 9,45 211,58 5,0 4,276 19,50 44,93
8 x 5in HWDP 8 73,28 202,13 5,0 2.500 50,82 44,33
6 1/2in HydroMech 1 5,10 128,85 6.500 2.500 121,47 32,11
10 x 5in HWDP 10 92,10 123,75 5,0 2.500 50,54 30,08
4 1/2"IF x 6-5/8" R 1 0,80 31,65 8.281 2.813 123,00 14,80
8" NMDC 1 9,05 30,85 8.125 3.500 150,16 14,48
8" NMDC with MWD 1 8,57 21,80 8.250 3.500 156,68 10,02
8" Landing Sub 1 0,93 13,23 8,000 3.250 80,64 5,62
12-1/8" String Stabil 1 2,00 12,30 8.250 2.813 175,87 5,37
8" Float Sub 1 0,70 10,30 8,000 3,0 169,99 4,22
8" Motor with 12-1/ 1 9,32 9,60 8,000 3,0 120,18 3,83
12.25in Bit 1 0,28 0,28 12.250 166,76 0,15
Stabilisers
Name Item Length (m) Blade OD (in) Hydraulic OD (in) Blade Centre (m) Blade Count Blade Width (in) Blade Wrap (in)
Jars
Name Dist from Bit (m) Air Weight Below Jar Internal Jar Latch Down Jar Latch Up Jar Pump Open Jar Stroke Length
(klbf) Friction (klbf) (klbf) (klbf) Area (in2) (in)
6 1/2in HydroMech 128,85 32,11 40,00 84,00
Motor
Name Manufacturer Serial Number Bend Angle (deg)
Bit
Name Type Manufacturer Serial Number IADC Code Bit TFA (in2) Nozzle Details
(32nds)
12.25in Bit Bit 9004409 S322 1,154 5 x 16, 1 x 15
Prepared by
Date Printed:
616418243.xls
2
SYSDRILL
Assembly Report
12,30
Prepared by
Date Printed:
616418243.xls