You are on page 1of 2
WiFi Range Extender View the Quick Setup Guide Video —W¥—- setup-wifi.com/ setup Step 1 Step 2 Plug-the- Extender into-a-power Go-to -yeurP-C-cr Phone-settings, ~7 "Pf Oper Wi-Fi; and tarrrit on: Search for the network name "WI-FI Extender" and click on it to connect. S!2wirtextenneR = 2 © ‘| ws | Step 3 @ http://192.168.10.1 © or scan | QR Code. oo Open a web- browser - ---------}}--------- 5 ee - | neeee - and input: Oj Oo} Step 4 When the steps are 7 complete, your Extender Click on the automatically reboots. Wei ofthe r Place it in the best location Fi nelwor for better service (halfway you want to between your router and the Poor signal area.) Step 5 (@ Password S12) [SEEPS | Famers, The Extender's default Type your Wi-Fi name is your [Wi-Fi name - password into Plus],-e.g.-HOME Wi-Fi~ is oer Plus: The password - ----- - ex Clek the remains the main router batten password. J LSet Td Our friendly customer service will work hard to put Cee en Ceo Ce tance ct) 4 888.315.3094 ee ocneS sere Fe Cue) ET Eee & WARNING Unplig the device in the evant of @ thunderstorm to prevent 5 1. My Wi-Fi says connected but | have no internet connection. > If the Wi-Fi is connected, but there is no internet, check that the router’s Wi-Fi is actively working. — Check the status of the Wi-Fi indicator light. If it stays on, it means it is connected to the router successfully, and it might be more of an IP conflict. You can try to disable Security mode so that the devices connected to both routers can interact with each other. — If the Wi-Fi indicator light keeps flashing frequently, that means the connection failed, and you may have entered the wrong password. It could also be for some other reasons, so try to restore factory settings. To do that, press the WPS button for about 10 seconds. Set up the Extender again. 2. Why are some devices at home (printer, cctv camera, TV, iPhone) Unable to connect to the Extender? > -This-means the-device does notrecognize the-Extender- > The device should be in the same network as your router. You may disable the Extender in bridge mode to see if it will work. 3. Why is the connection slower when connected to the Extender than when connected to Wi-Fi from the main router? > The Wi-Fi Extender supports 2.4G networks and not 5G. The Wi-Fi Extender is used to extend the range of your Wi-Fi (which -- -yourmain router Wi-Fi-can+t cever)- lt der — Sometimes, the signal (coverage or speed) drops due to external influences—a microwave oven, nearby cell towers nearby, a neighbor's Wi-Fi on the same channel, walls, and partitions in a building made of certain materials blocking a Wi-Fi signal. We apologize! — Try the Extender in different positions: place it at different angles or locations for a better signal. 4. Why am | unable to enter the webpage? If you cannot open the webpage, follow these steps: Open your browser on your cellphone/PC, and enter the digits “192,168.10.1" into the adress bar. Enter username and password - “admin” then log in. You can also connect the Wi-Fi Extender to your PC with an Ethernet cable, then open your browser and enter the same digit “192.168.10.1", Enter the username and password “admin” and follow same steps. If you are still unable to open the webpage, please check and try these: Check if you are connected to the Wi-Fi Extender during setup. This is necessary because before connecting to the router, the Wi-Fi Extender should have no internet access. Your mobile will usually auto-connect to the other Wi-Fi or ask if it is connected to the present ender during s: — Disable your mobile’s data during setup. — Use another mobile or PC to try. PW eC t Laas 1d > 2500sq ft Ca Ra eh Bae Rela — It should be between the modem and the area with a low signal. The position must be able to receive a good Wi-Fi signal from the modem router. 7. Should the Ethernet cable be connected from the router to the Extender? > No, you should only plug the cable from the Extender to a computer or a game console. ea se eet a Mae ls > No, it increases the range of your Wi-Fi. PMR ce mC aor > No, only with 2.46.

You might also like