You are on page 1of 1
10. aL 12, 13, u. ‘The specific output per kg mass flow rate of a sas turbine (having fixed efficiencies of compressor and turbine and fixed higher and lower temperature) with increase in pressure ratio will A. Increase frst at fast rate and then slow BB. Increase first at slow rate and then fast C. Decrease continuously D. First increase, reach maximum snd then decrease Isothermal compression efficiency, even when running at high speed, ean be approached by using A. Multistage compression B. Cold water spray . Both (A) and (B) above D. Fully insulating the eylinder Gas turbines for power generation are normally used A. To supply base load requirements B. To supply peak load requiremen's ©. Toenable start thermal power plant D, In emergency Gas turbines use following type of sir compressor A. Centtifugal type B. Reciprocating type ©. Lobe type D. Axial flow type Pick up the wrong statement A. Pulse-jet requires no ambient air for propulsion B. Ramjet engine has no turbine C. Turbine drives compressor in a Turbojet D. Bypass turbojet engine increases the th fool economy ust without adversely affecting, the propulsive efficiency and 1 m of air at atmospheric condition weighs approximately A. 05 ke, B. 10 kg. C13 ke D. 22 ke ‘The inter-cooler pressure, for minimum work requited, for a two stage reciprocating air compressor, is given by (where p; = Intake pressure of air, pg = Inter-cooler pressure, and py = Delivery pressure of air) A p= pixpa B. ps = pi/ps © map xm D. pe = ps/m Page 2

You might also like