Professional Documents
Culture Documents
BA4560 Datasheet
BA4560 Datasheet
Operational Amplifiers
●Selection Guide
Maximum Operation Temperature
+105°C
Slew Rate BA4560RF
High Reliability Dual 4V/µs BA4560RFJ
BA4560RFV
BA4560RFVT
BA4560RFVM
-IN
VOUT
+IN
VEE
Fig. 1 Simplified schematic
○Product structure:Silicon monolithic integrated circuit ○This product is not designed protection against radioactive rays.
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 1/41 7.SEP.2012 Rev.002
TSZ22111・14・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
OUT1 1 14 OUT4
+IN1 3 CH2
6 -IN2 +IN2 5 10 +IN3
+ - - + + -
-IN2 6 CH2 CH3 9 -IN3
VEE 4 5 +IN2
OUT2 7 8 OUT3
Package
SOP8 SSOP-J8 SSOP-B8 TSSOP-B8 MSOP8 SSOP-B14
●Ordering Information
B A 4 5 6 x x x x x - xx
●Line-up
Operating Supply Supply Offset
Orderable
Topr Voltage Current Voltage Package
Part Number
(split supply) (Typ.) (max.)
SOP8 Reel of 2500 BA4560F-E2
SOP-J8 Reel of 2500 BA4560FJ-E2
-40°C to +85°C 4mA SSOP-B8 Reel of 2500 BA4560FV-E2
TSSOP-B8 Reel of 2500 BA4560FVT-E2
MSOP8 Reel of 3000 BA4560FVM-TR
6mV SOP8 Reel of 2500 BA4560RF-E2
±4.0V to ±15.0V
SOP-J8 Reel of 2500 BA4560RFJ-E2
3mA SSOP-B8 Reel of 2500 BA4560RFV-E2
-40°C to +105°C TSSOP-B8 Reel of 3000 BA4560RFVT-E2
MSOP8 Reel of 3000 BA4560RFVM-TR
SSOP-B14 Reel of 2500 BA4564RFV-E2
6mA
2.5mV SSOP-B14 Reel of 2500 BA4564WFV-E2
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 2/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 3/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
●Electrical Characteristics
○BA4560 (Unless otherwise specified VCC=+15V, VEE=-15V)
Temperature Limits
Parameter Symbol Unit Condition
Range Min. Typ. Max.
AV=20dB, RL=10kΩ
Total Harmonic Distortion THD+N 25℃ - 0.003 - %
VIN=0.05Vrms, f=1kHz
RS=100Ω, Vi=0V
- 8 - nV/ Hz
f=1kHz
Input Referred Noise Voltage Vn 25℃
RS=2.2Ω, RIAA
- - 2.2 μVrms
BW=10kHz to 30kHz
*8 Absolute value
*9 Current direction: Since first input stage is composed with PNP transistor, input bias current flows out of IC.
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 4/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4560R (Unless otherwise specified VCC=+15V, VEE=-15V, Full range -40℃ to +105℃)
Temperature Limits
Parameter Symbol Unit Condition
Range Min. Typ. Max.
25℃ - 0.5 6
Input Offset Voltage *10 Vio mV VOUT=0V
Full range - - 7
25℃ - 5 200
Input Offset Current *10 Iio nA VOUT=0V
Full range - - 200
25℃ - 50 500
Input Bias Current *11 Ib nA VOUT=0V
Full range - - 800
25℃ - 3 7 RL=∞, All Op-Amps
Supply Current ICC mA
Full range - - 7.5 VIN+=0V
25℃ ±12 ±14 - RL≧2kΩ
Maximum Output Voltage VOM V
Full range ±10 ±11.5 - Io=25mA
25℃ 86 100 - RL≧2kΩ, VO=±10V
Large Signal Voltage Gain AV dB
Full range 83 - - Vicm=0V
25℃ ±12 ±14 -
Input Common-mode Voltage Range Vicm V VOUT=±12V
Full range ±12 - -
AV=0dB, RL=10kΩ
Slew Rate SR 25℃ - 4 - V/μs
CL=100pF
AV=20dB, RL=10kΩ
Total Harmonic Distortion THD+N 25℃ - 0.003 - %
VIN=0.05Vrms, f=1kHz
RS=100Ω, Vi=0V
- 8 - nV/ Hz
f=1kHz
Input Referred Noise Voltage Vn 25℃
- 1.0 - μVrms DIN-AUDIO
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 5/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4564R (Unless otherwise specified VCC=+15V, VEE=-15V, Full range -40℃ to +105℃)
Temperature Limits
Parameter Symbol Unit Condition
Range Min. Typ. Max.
25℃ - 0.5 6
Input Offset Voltage *12 Vio mV VOUT=0V
Full range - - 7
25℃ - 5 200
Input Offset Current *12 Iio nA VOUT=0V
Full range - - 200
25℃ - 50 500
Input Bias Current *13 Ib nA VOUT=0V
Full range - - 800
25℃ - 6 14 RL=∞, All Op-Amps
Supply Current ICC mA
Full range - - 15 VIN+=0V
25℃ ±12 ±14 - RL≧2kΩ
Maximum Output Voltage VOM V
Full range ±10 ±11.5 - Io=25mA
25℃ 86 100 - RL≧2kΩ, VOUT=±10V
Large Signal Voltage Gain AV dB
Full range 83 - - Vicm=0V
25℃ ±12 ±14 -
Input Common-mode Voltage Range Vicm V VOUT=±12V
Full range ±12 - -
AV=0dB, RL=10kΩ
Slew Rate SR 25℃ - 4 - V/μs
CL=100pF
AV=20dB, RL=10kΩ
Total Harmonic Distortion THD+N 25℃ - 0.003 - %
VIN=0.05Vrms, f=1kHz
RS=100Ω, Vi=0V
- 8 - nV/ Hz
f=1kHz
Input Referred Noise Voltage Vn 25℃
- 1.0 - μVrms DIN-AUDIO
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 6/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4564W (Unless otherwise specified VCC=+15V, VEE=-15V, Full range -40℃ to +105℃)
Limits
Temperature
Parameter Symbol BA4564WFV Unit Condition
Range
Min. Typ. Max.
25℃ - 0.5 2.5
Input Offset Voltage *14 Vio mV VOUT=0V
Full range - - 4
25℃ - 5 200
Input Offset Current *14 Iio nA VOUT=0V
Full range - - 200
25℃ - 50 300
Input Bias Current *15 Ib nA VOUT=0V
Full range - - 500
25℃ - 6 11 RL=∞, All Op-Amps
Supply Current ICC mA
Full range - - 13 VIN+=0V
25℃ ±12 ±14 - RL≧2kΩ
Maximum Output Voltage VOM V
Full range ±10 ±11.5 - Io=25mA
25℃ 86 100 - RL≧2kΩ, VOUT=±10V
Large Signal Voltage Gain AV dB
Full range 83 - - Vicm=0V
25℃ ±12 ±14 -
Input Common-mode Voltage Range Vicm V VOUT=±12V
Full range ±12 - -
AV=0dB, RL=10kΩ
Slew Rate SR 25℃ - 4 - V/μs
CL=100pF
AV=20dB, RL=10kΩ
Total Harmonic Distortion THD+N 25℃ - 0.003 - %
VIN=0.05Vrms, f=1kHz
RS=100Ω, Vi=0V
- 8 - nV/ Hz
f=1kHz
Input Referred Noise Voltage Vn 25℃
- 1.0 - μVrms DIN-AUDIO
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 7/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 8/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 9/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
1000 8.0
800 -40℃
BA4560F
6.0 25℃
BA4560FJ
600 BA4560FV/FVT
4.0
BA4560FVM
400 85℃
2.0
200
0 0.0
0 25 50 75 100 125 0 5 10 15 20 25 30 35
AMBIENT TEMPERTURE [ ℃] . SUPPLY VOLTAGE [V]
Fig.2
Derating Curve Fig.3
Supply Current - Supply Voltage
30
MAXIMUM OUTPUT VOLTAGE SWING [VP-P]
8.0
25
SUPPLY CURRENT [mA]
6.0
±7.5 V ±15V
20
4.0 15
±4 V
10
2.0
5
0.0 0
-50 -25 0 25 50 75 100 0.1 1 10
AMBIENT TEMPERATURE [℃] LOAD RESISTANCE [kΩ]
Fig.4 Fig.5
Supply Current - Ambient Temperature Maximum Output Voltage Swing
- Load Resistance
(VCC/VEE=+15V/-15V,Ta=25℃)
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 10/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4560
20 20
15 15
VOH
10 10
OUTPUT VOLTAGE [V]
5 5
0 0
-5 -5
VOL
-10 -10
VOL
-15 -15
-20 -20
0.1 1 10 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 ±18
LOAD RESISTANCE [kΩ] SUPPLY VOLTAGE [V]
Fig.6 Fig.7
Maximum Output Voltage Maximum Output Voltage
- Load Resistance - Supply Voltage
(VCC/VEE=+15V/-15V,Ta=25℃) (RL=2kΩ,Ta=25℃)
20 20
15 15
10 10
OUTPUT VOLTAGE [V]
VOH
VOH
5 5
0 0
-5 -5 VOL
VOL
-10 -10
-15 -15
-20 -20
-50 -25 0 25 50 75 100 0 5 10 15 20 25
AMBIENT TEMPERATURE [℃] OUTPUT CURRENT [mA]
Fig.8 Fig.9
Maximum Output Voltage Maximum Output Voltage
- Ambient Temperature - Output Current
(VCC/VEE=+15V/-15V, RL=2kΩ) (VCC/VEE=+15V/-15V,Ta=25℃)
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 11/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4560
6 6
INPUT OFFSET VOLTAGE [mV]
4 4
0 0
±15V
-2 85℃ -2
-4 -4
-6 -6
±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 -50 -25 0 25 50 75 100
SUPPLY VOLTAGE [V] AMBIENT TEMPERATURE [℃]
Fig.10 Fig.11
Input Offset Voltage - Supply Voltage Input Offset Voltage - Ambient Temperature
(Vicm=0V, Vout=0V) (Vicm=0V, Vout=0V)
80 60
.
70
50
INPUT BIAS CURRENT [nA]
INPUT BIAS CURRENT [nA]
±4V
60
-40℃ 40
50 25℃
40 30
±7.5V
30 ±15V
20
20
85℃
10
10
0 0
±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 -50 -25 0 25 50 75 100
SUPPLY VOLTAGE [V] AMBIENT TEMPERATURE [℃]
Fig.12 Fig.13
Input Bias Current - Supply Voltage Input Bias Current - Ambient Temperature
(Vicm=0V, Vout=0V) (Vicm=0V, Vout=0V)
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 12/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4560
30 30
.
20
-40℃
10 10
25℃ ±4V ±7.5V
0 0
±15V
-10 -10
85℃
-20 -20
-30 -30
±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 -50 -25 0 25 50 75 100
SUPPLY VO LTAG E [ V] AMBIENT TEMPERATURE [°C]
Fig.14 Fig.15
Input Offset Current - Supply Voltage Input Offset Current - Ambient Temperature
(Vicm=0V, Vout=0V) (Vicm=0V, Vout=0V)
5 150
COMMON MODE REJECTION RATIO [dB]
4
INPUT OFFSET VOLTAGE [mV]
85℃ 125
3
2 25℃
100
-40℃
1
0 75
-1
50
-2
-3
25
-4
-5 0
0 2 4 6 8 -50 -25 0 25 50 75 100
COMMON MODE INPUT VOLTAGE [V] AMBIENT TEMPERATURE [°C]
Fig.16 Fig.17
Input Offset Voltage Common Mode Rejection Ratio
-Common Mode Input Voltage - Ambient Temperature
(VCC=8V, Vout=4V) (VCC/VEE=+15V/-15V, Vicm=-12V to +12V)
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 13/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4560 .
150 6
POWER SUPPLY REJECTION RATIO [dB]
.
125 5
75 3
50 2
25 1
0 0
-50 -25 0 25 50 75 100 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16
AMBIENT TEMPERATURE [℃] SUPPLY VOLTAGE [V]
Fig.18 Fig.19
Power Supply Rejection Ratio Slew Rate - Supply Voltage (CL=100pF,
- Ambient Temperature RL=2kΩ, Ta=25℃)
(VCC/VEE=+4V/-4V to +15V/-15V)
80 1
INPUT REFERRED NOISE VOLTAGE
60 0.1
20kHz
[nV/√Hz]
40 0.01
1kHz
20 0.001
20Hz
0 0.0001
1 10 100 1000 10000 0.1 1 10
FREQUENCY [Hz] OUTPUT VOLTAGE [Vrms]
Fig.20 Fig.21
Equivalent Input Noise Voltage - Frequency Total Harmonic Distortion - Output Voltage
(VCC/VEE=+15V/-15V, RS=100Ω, Ta=25℃) (VCC/VEE=+15V/-15V, AV=20dB,
RL=2kΩ, 80kHz-LPF, Ta=25℃)
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 14/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4560
30 50 200
MAXIMUM OUTPUT VOLTAGE SWING [VP-P]
180
PHASE
25 40 160
VOLTAGE G AIN[dB]
140
20
PHASE [deg]
30 120
GAIN
.
15 100
20 80
10 60
10 40
5
20
0 0 0
2 3 4 5 6 7
13
10 104
10 5
100
10 106
1000 10
1.E+02 10
1.E+03 10
1.E+04 10
1.E+05 10
1.E+06 10
1.E+07
FREQUENCY [KHz] SUPPLY VOLTAGE [V]
Fig.22 Fig.23
Maximum Output Voltage Swing – Frequency Voltage Gain - Frequency
(VCC/VEE=+15V/-15V, RL=2kΩ, Ta=25℃) (VCC/VEE=+15V/-15V, AV=40dB, RL=2kΩ, Ta=25℃)
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 15/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4560R
1000 5.0
-40℃
25℃
800 BA4560RF 4.0
BA4560RFJ
BA4560RFV/FVT
600 3.0
BA4560RFVM
400 2.0
105℃
200 1.0
0 0.0
0 25 50 75 100 125 0 5 10 15 20 25 30 35
AMBIENT TEMPERTURE [℃] . SUPPLY VOLTAGE [V]
Fig.24 Fig.25
Derating Curve Supply Current - Supply Voltage
5.0 30
MAXIMUM OUTPUT VOLTAGE SWING [VP-P]
±15V
25
4.0
SUPPLY CURRENT [mA]
20
3.0
±4 V
15
2.0 ±7.5 V
10
1.0
5
0.0 0
-50 -25 0 25 50 75 100 125 0.1 1 10
AMBIENT TEMPERATURE [℃] LOAD RESISTANCE [kΩ]
Fig.26 Fig.27
Supply Current - Ambient Temperature Maximum Output Voltage Swing
- Load Resistance
(VCC/VEE=+15V/-15V, Ta=25℃)
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 16/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4560R
20 20
15 15
VOH
10 10
OUTPUT VOLTAGE [V]
5 5
0 0
-5 VOL
-5
-10 -10
VOL
-15 -15
-20 -20
0.1 1 10 ±4 ±6 ±8 ±10 ±12 ±14 ±16
LOAD RESISTANCE [kΩ] SUPPLY VOLTAGE [V]
Fig.28 Fig.29
Maximum Output Voltage Maximum Output Voltage
- Load Resistance - Supply Voltage
(VCC/VEE=+15V/-15V, Ta=25℃) (RL=2kΩ, Ta=25℃)
20 20
15 15
10 10
OUTPUT VOLTAGE [V]
VOH
VOH
5 5
0 0
-5 -5
VOL VOL
-10 -10
-15 -15
-20 -20
-50 -25 0 25 50 75 100 125 0 5 10 15 20 25
AMBIENT TEMPERATURE [℃] OUTPUT CURRENT [mA]
Fig.30 Fig.31
Maximum Output Voltage Maximum Output Voltage
- Ambient Temperature - Output Current
(VCC/VEE=+15V/-15V, RL=2kΩ) (VCC/VEE=+15V/-15V, Ta=25℃)
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 17/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4560R
6 6
INPUT OFFSET VOLTAGE [mV]
±4V
2 2
-40℃ ±7.5V
25℃
0 0
105℃
-2 -2 ±15V
-4 -4
-6 -6
±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 -50 -25 0 25 50 75 100 125
SUPPLY VOLTAGE [V] AMBIENT TEMPERATURE [℃]
Fig.33
Fig.32 Input Offset Voltage - Ambient Temperature
Input Offset Voltage - Supply Voltage (Vicm=0V, Vout=0V)
(Vicm=0V, Vout=0V)
200 200
.
.
180 180
INPUT BIAS CURRENT [nA]
INPUT BIAS CURRENT [nA]
160 160
140 140
120 120
±4V
25℃ ±7.5V
100 -40℃ 100
80 80
60 60
40 40
105℃ ±15V
20 20
0 0
±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16
SUPPLY VOLTAGE [V] SUPPLY VOLTAGE [V]
Fig.34 Fig.35
Input Bias Current - Supply Voltage Input Bias Current - Ambient Temperature
(Vicm=0V, Vout=0V) (Vicm=0V, Vout=0V)
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 18/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4560R
.
60 60
INPUT OFFSET CURRENT [nA]
0 0
±7.5V
-20 25℃ -20
-40 -40
-60 -60
±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 -50 -25 0 25 50 75 100 125
SUPPLY VOLTAGE [V] AMBIENT TEMPERATURE [°C]
Fig.36 Fig.37
Input Offset Current - Supply Voltage Input Offset Current - Ambient Temperature
(Vicm=0V, Vout=0V) (Vicm=0V, Vout=0V)
5 150
COMMON MODE REJECTION RATIO [dB]
4
INPUT OFFSET VOLTAGE [mV]
125
3
2
100
1
0 75
-1 -40℃
50
-2
25℃
-3 25
105℃
-4
-5 0
0 2 4 6 8 -50 -25 0 25 50 75 100 125
COMMON MODE INPUT VOLTAGE [V] AMBIENT TEMPERATURE [°C]
Fig.38 Fig.39
Input Offset Voltage Common Mode Rejection Ratio
-Common Mode Input Voltage - Ambient Temperature
(VCC=8V, Vout=4V) (VCC/VEE=+15V/-15V, Vicm=-12V to +12V)
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 19/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4560R .
150 5.0
POWER SUPPLY REJECTION RATIO [dB]
.
125
4.0
1.0
25
0 0.0
-50 -25 0 25 50 75 100 125 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16
AMBIENT TEMPERATURE [℃] SUPPLY VOLTAGE [V]
Fig.40 Fig.41
Power Supply Rejection Ratio Slew Rate - Supply Voltage
- Ambient Temperature (CL=100pF, RL=2kΩ, Ta=25℃)
(VCC/VEE=+4V/-4V to +15V/-15V)
80 1
TOTAL HARMONIC DISTORTION [%]
INPUT REFERRED NOISE VOLTAGE
20kHz
60 0.1
[nV/√Hz] .
40 0.01 1kHz
20 0.001
20Hz
0 0.0001
1 10 100 1000 10000 0.1 1 10
FREQUENCY [Hz] OUTPUT VOLTAGE [Vrms]
Fig.42 Fig.43
Equivalent Input Noise Voltage - Frequency Total Harmonic Distortion - Output Voltage
(VCC/VEE=+15V/-15V, RS=100Ω, Ta=25℃) (VCC/VEE=+15V/-15V, AV=20dB,
RL=2kΩ, 80kHz-LPF, Ta=25℃)
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 20/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4560R
MAXIMUM OUTPUT VOLTAGE SWING [VP-P]
30 60 0
25 50 -30
PHASE
PHASE [deg]
15 30 GAIN
-90
10 20 -120
5 10 -150
0 0 -180
10
10 2
100
10 3
1000
10 4
10000
10 10 5
100000 6
1000000
10 102 1.E+03
1.E+02 103 104 1.E+05
1.E+04 105 106
1.E+06 107
1.E+07
FREQUENCY [Hz] FREQ UENCY [Hz]
Fig.44 Fig.45
Maximum Output Voltage Swing - Frequency Voltage Gain - Frequency (VCC/VEE=+15V/-15V,
(VCC/VEE=+15V/-15V, RL=2kΩ, Ta=25℃) AV=40dB, RL=2kΩ, Ta=25℃)
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 21/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4564R
1000 12.0
800
PO WER DISSIPATION [mW]
BA4564RFV -40℃
8.0
600 25℃
6.0
400
4.0
105℃
200
2.0
0 0.0
0 25 50 75 100 125 0 5 10 15 20 25 30 35
AMBIENT TEMPERATURE [℃]
SUPPLY VOLTAGE [V]
Fig.46
Fig.47
Derating Curve
Supply Current - Supply Voltage
12.0 30
MAXIMUM OUTPUT VOLTAGE SWING [VP-P]
10.0 25
SUPPLY CURRENT [mA]
±15V
8.0 20
6.0 15
±4V
4.0 10
±7.5V
2.0 5
0.0 0
-50 -25 0 25 50 75 100 125 0.1 1 10
AMBIENT TEMPERATURE [℃] LOAD RESISTANCE [kΩ]
Fig.48 Fig.49
Supply Current - Ambient Temperature Maximum Output Voltage Swing
- Load Resistance
(VCC/VEE=+15V/-15V, Ta=25℃)
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 22/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4564R
20 20
15 15
VOH
10 10
OUTPUT VOLTAGE [V]
5 5
0 0
-5 -5
VOL
-10 -10
VOL
-15 -15
-20 -20
0.1 1 10 ±4 ±6 ±8 ±10 ±12 ±14 ±16
LOAD RESISTANCE [kΩ] SUPPLY VOLTAGE [V]
Fig.50 Fig.51
Maximum Output Voltage Maximum Output Voltage
-Load Resistance -Supply Voltage
(VCC/VEE=+15V/-15V, Ta=25℃) (RL=2kΩ, Ta=25℃)
20 20
15 15
10 10
OUTPUT VOLTAGE [V]
VOH VOH
5 5
0 0
-5 VOL -5 VOL
-10 -10
-15 -15
-20 -20
-50 -25 0 25 50 75 100 125 0 5 10 15 20 25
AMBIENT TEMPERATURE [℃] OUTPUT CURRENT [mA]
Fig.52 Fig.53
Maximum Output Voltage Maximum Output Voltage
- Ambient Temperature - Output Current
(VCC/VEE=+15V/-15V, RL=2kΩ) (VCC/VEE=+15V/-15V,Ta=25℃)
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 23/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4564R
6 6
INPUT OFFSET VOLTAGE [mV]
-40℃ ±4V
±7.5V
25℃ 2
2
0 0
105℃
±15V
-2 -2
-4 -4
-6 -6
±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 -50 -25 0 25 50 75 100 125
SUPPLY VOLTAGE [V] AMBIENT TEMPERATURE [℃]
Fig.54 Fig.55
Input Offset Voltage - Supply Voltage Input Offset Voltage - Ambient Temperature
(Vicm=0V, Vout=0V) (Vicm=0V, Vout=0V)
200 200
.
180 180
INPUT BIAS CURRENT [nA]
160 160
INPUT BIAS CURRENT [nA]
140 140
-40℃ 25℃ ±4V ±7.5V
120 120
100 100
80 80
60 60
105℃ ±15V
40 40
20 20
0 0
±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 -50 -25 0 25 50 75 100 125
SUPPLY VOLTAGE [V] AMBIENT TEMPERATURE [℃]
Fig.56 Fig.57
Input Bias Current - Supply Voltage Input Bias Current - Ambient Temperature
(Vicm=0V, Vout=0V) (Vicm=0V, Vout=0V)
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 24/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4564R
60 60
40 40
0 0
±7.5V
-20 -20
25℃
-40 -40
-60 -60
±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 -50 -25 0 25 50 75 100 125
SUPPLY VOLTAGE [V] AMBIENT TEMPERATURE [°C]
Fig.58 Fig.59
Input Offset Current - Supply Voltage Input Offset Current - Ambient Temperature
(Vicm=0V, Vout=0V) (Vicm=0V, Vout=0V)
150
COMMON MODE REJECTION RATIO [dB]
5
4
125
INPUT OFFSET VOLTAGE [mV]
-40℃
3
25℃
2 100
105℃
1
0 75
-1
50
-2
-3 25
-4
0
-5
-50 -25 0 25 50 75 100 125
0 2 4 6 8
AMBIENT TEMPERATURE [°C]
COMMON MODE INPUT VOLTAGE [V]
Fig.61
Fig.60 Common Mode Rejection Ratio
Input Offset Voltage - Ambient Temperature
- Common Mode Input Voltage (VCC/VEE=+15V/-15V, Vicm=-12V to +12V)
(VCC=8V, Vout=4V)
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 25/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4564R
.
150 5.0
POWER SUPPLY REJECTION RATIO [dB]
.
125
4.0
25 1.0
0 0.0
-50 -25 0 25 50 75 100 125 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16
AMBIENT TEMPERATURE [℃] SUPPLY VOLTAGE [V]
Fig.62 Fig.63
Power Supply Rejection Ratio Slew Rate - Supply Voltage
- Ambient Temperature (CL=100pF, RL=2kΩ, Ta=25℃)
(VCC/VEE=+4V/-4V to +15V/-15V)
80 1
TOTAL HARMONIC DISTORTION [%]
INPUT REFERRED NOISE VOLTAGE
60 0.1 20kHz
[nV/√Hz] .
40 0.01 1kHz
20 0.001
20Hz
0 0.0001
1 10 100 1000 10000 0.1 1 10
FREQUENCY [Hz] OUTPUT VOLTAGE [Vrms]
Fig.64 Fig.65
Equivalent Input Noise Voltage - Frequency Total Harmonic Distortion - Output Voltage
(VCC/VEE=+15V/-15V, RS=100Ω, Ta=25℃) (VCC/VEE=+15V/-15V, AV=20dB,
RL=2kΩ, 80kHz-LPF, Ta=25℃)
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 26/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4564R
MAXIMUM OUTPUT VOLTAGE SWING [VP-P]
30 60 -200
PHASE -170
25 50
PHASE [deg]
-110
15 30
GAIN
-80
10 20
-50
5 10
-20
0 0
2 3 4 5 6 7
1.E+01
10 102
1.E+02 103
1.E+03 104
1.E+04 105
1.E+05 106
1.E+06 10
1.E+02 10
1.E+03 10
1.E+04 10
1.E+05 10
1.E+06 10
1.E+07
FREQUENCY [Hz] FREQUENCY [Hz]
Fig.66 Fig.67
Maximum Output Voltage Swing – Frequency Voltage Gain - Frequency
(VCC/VEE=+15V/-15V, RL=2kΩ, Ta=25℃) (VCC/VEE=+15V/-15V, AV=40dB, RL=2kΩ, Ta=25℃)
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 27/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4564W
1000 12.0
800
POWER DISSIPATION [mW]
BA4564WFV -40℃
8.0
600 25℃
6.0
400
4.0
105℃
200
2.0
0 0.0
0 25 50 75 100 125 0 5 10 15 20 25 30 35
AMBIENT TEMPERATURE [℃]
SUPPLY VOLTAGE [V]
Fig.68
Fig.69
Derating Curve
Supply Current - Supply Voltage
12.0 30
MAXIMUM OUTPUT VOLTAGE SWING [VP-P]
10.0 25
SUPPLY CURRENT [mA]
±15V
8.0 20
6.0 15
±4V
4.0 10
±7.5V
2.0 5
0.0 0
-50 -25 0 25 50 75 100 125 0.1 1 10
AMBIENT TEMPERATURE [℃] LOAD RESISTANCE [kΩ]
Fig.70 Fig.71
Supply Current - Ambient Temperature Maximum Output Voltage Swing
- Load Resistance
(VCC/VEE=+15V/-15V, Ta=25℃)
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 28/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4564W
20 20
15 15
VOH
10 10
OUTPUT VOLTAGE [V]
5 5
0 0
-5 -5
VOL
-10 -10
VOL
-15 -15
-20 -20
0.1 1 10 ±4 ±6 ±8 ±10 ±12 ±14 ±16
LOAD RESISTANCE [kΩ] SUPPLY VOLTAGE [V]
Fig.72 Fig.73
Maximum Output Voltage Maximum Output Voltage
-Load Resistance -Supply Voltage
(VCC/VEE=+15V/-15V, Ta=25℃) (RL=2kΩ, Ta=25℃)
20 20
15 15
10 10
OUTPUT VOLTAGE [V]
VOH VOH
5 5
0 0
-5 VOL -5 VOL
-10 -10
-15 -15
-20 -20
-50 -25 0 25 50 75 100 125 0 5 10 15 20 25
AMBIENT TEMPERATURE [℃] OUTPUT CURRENT [mA]
Fig.74 Fig.75
Maximum Output Voltage Maximum Output Voltage
- Ambient Temperature - Output Current
(VCC/VEE=+15V/-15V, RL=2kΩ) (VCC/VEE=+15V/-15V, Ta=25℃)
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 29/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4564W
6 6
INPUT OFFSET VOLTAGE [mV]
-40℃ ±4V
±7.5V
25℃ 2
2
0 0
105℃
±15V
-2 -2
-4 -4
-6 -6
±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 -50 -25 0 25 50 75 100 125
SUPPLY VOLTAGE [V] AMBIENT TEMPERATURE [℃]
Fig.76 Fig.77
Input Offset Voltage - Supply Voltage Input Offset Voltage - Ambient Temperature
(Vicm=0V, Vout=0V) (Vicm=0V, Vout=0V)
200 200
.
180 180
INPUT BIAS CURRENT [nA]
160 160
INPUT BIAS CURRENT [nA]
140 140
-40℃ ±4V ±7.5V
25℃
120 120
100 100
80 80
60 60
105℃ ±15V
40 40
20 20
0 0
±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 -50 -25 0 25 50 75 100 125
SUPPLY VOLTAGE [V] AMBIENT TEMPERATURE [℃]
Fig.78 Fig.79
Input Bias Current - Supply Voltage Input Bias Current - Ambient Temperature
(Vicm=0V, Vout=0V) (Vicm=0V, Vout=0V)
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 30/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4564W
60 60
40 40
0 0
±7.5V
-20 -20
25℃
-40 -40
-60 -60
±0 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16 -50 -25 0 25 50 75 100 125
SUPPLY VOLTAGE [V] AMBIENT TEMPERATURE [°C]
Fig.80 Fig.81
Input Offset Current - Supply Voltage Input Offset Current - Ambient Temperature
(Vicm=0V, Vout=0V) (Vicm=0V, Vout=0V)
150
COMMON MODE REJECTION RATIO [dB]
5
4
125
INPUT OFFSET VOLTAGE [mV]
-40℃
3
25℃
2 100
105℃
1
0 75
-1
50
-2
-3 25
-4
0
-5
-50 -25 0 25 50 75 100 125
0 2 4 6 8
AMBIENT TEMPERATURE [°C]
COMMON MODE INPUT VOLTAGE [V]
Fig.83
Fig.82 Common Mode Rejection Ratio
Input Offset Voltage - Ambient Temperature
- Common Mode Input Voltage (VCC/VEE=+15V/-15V, Vicm=-12V to +12V)
(VCC=8V, Vout=4V)
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 31/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4564W
.
150 5.0
POWER SUPPLY REJECTION RATIO [dB]
.
125
4.0
1.0
25
0 0.0
-50 -25 0 25 50 75 100 125 ±2 ±4 ±6 ±8 ±10 ±12 ±14 ±16
AMBIENT TEMPERATURE [℃] SUPPLY VOLTAGE [V]
Fig.84 Fig.85
Power Supply Rejection Ratio Slew Rate - Supply Voltage
- Ambient Temperature (CL=100pF, RL=2kΩ, Ta=25℃)
(VCC/VEE=+4V/-4V to +15V/-15V)
80 1
TOTAL HARMONIC DISTORTION [%]
INPUT REFERRED NOISE VOLTAGE
60 0.1 20kHz
[nV/√Hz] .
40 0.01 1kHz
20 0.001
20Hz
0 0.0001
1 10 100 1000 10000 0.1 1 10
FREQUENCY [Hz] OUTPUT VOLTAGE [Vrms]
Fig.86 Fig.87
Equivalent Input Noise Voltage - Frequency Total Harmonic Distortion - Output Voltage
(VCC/VEE=+15V/-15V,RS=100Ω, Ta=25℃) (VCC/VEE=+15V/-15V, AV=20dB,
RL=2kΩ,80kHz-LPF, Ta=25℃)
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 32/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
○BA4564W
MAXIMUM OUTPUT VOLTAGE SWING [VP-P]
30 60 -200
PHASE
25 50 -170
PHASE [deg]
-110
15 30
GAIN
-80
10 20
-50
5 10
-20
0 0
1.E+01
10 102
1.E+02 103
1.E+03 104
1.E+04 105
1.E+05 106
1.E+06 102
1.E+00 3
1.E+02
10 4
105 1.E+06
101.E+04 106 107
1.E+08
FREQUENCY [Hz] FREQUENCY [Hz]
Fig.88 Fig.89
Maximum Output Voltage Swing – Frequency Voltage Gain - Frequency
(VCC/VEE=+15V/-15V, RL=2kΩ,Ta=25℃) (VCC/VEE=+15V/-15V, AV=40dB, RL=2kΩ, Ta=25℃)
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 33/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
●Application Information
Test circuit1 NULL method
VCC, VEE, EK, Vicm Unit: V
VF3 OFF ON 0 0
Input Bias Current OFF 15 -15 3
VF4 ON OFF 0 0
VF5 15 -15 0 0
Large Signal Voltage Gain ON ON ON 4
VF6 15 -15 0 0
Common-mode Rejection Ratio VF7 3 -27 0 0
ON ON OFF 5
(Input common-mode Voltage Range) VF8 27 -3 0 0
Power Supply VF9 4 -4 0 0
ON ON OFF 6
Rejection Ratio VF10 15 -15 0 0
-Calculation-
1. Input Offset Voltage (Vio)
VF1
Vio [V]
1 + Rf / Rs 0.1μF
Rf=50kΩ
2. Input Offset Current (Iio)
VF2 - VF1 500kΩ 0.1μF
Iio [A]
Ri × (1 + Rf / Rs) SW1 VCC EK
+15V
Rs=50Ω
3. Input Bias Current (Ib) Ri=10kΩ
500kΩ
DUT
VF4 - VF3 Ri=10kΩ NULL
Ib [A] Rs=50Ω
SW3
1000pF
2 × Ri × (1 + Rf / Rs) Vicm RL
V VF
SW2 VEE
50kΩ -15V
4. Large Signal Voltage Gain (Av)
ΔEK × (1+ Rf/Rs)
Av 20 × Log [dB]
VF5 - VF6 Fig. 90 Test circuit1 (one channel only)
SW No. SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8 SW9 SW10 SW11 SW12 SW13 SW14
Supply Current OFF OFF OFF ON OFF ON OFF OFF OFF OFF OFF OFF OFF OFF
High Level Output Voltage OFF OFF ON OFF OFF ON OFF OFF ON OFF OFF OFF ON OFF
Low Level Output Voltage OFF OFF ON OFF OFF ON OFF OFF OFF OFF OFF OFF ON OFF
Slew Rate OFF OFF OFF ON OFF OFF OFF ON ON ON OFF OFF OFF OFF
Unity Gain Frequency OFF ON OFF OFF ON ON OFF OFF ON ON ON OFF OFF OFF
Total Harmonic Distortion ON OFF OFF OFF ON OFF ON OFF ON ON ON OFF OFF OFF
Input Referred Noise Voltage ON OFF OFF OFF ON ON OFF OFF OFF OFF ON OFF OFF OFF
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 34/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
SW5 R2
VH
VCC
A
VL
-
t
Input wave
SW1 SW2 SW3 +
Output voltage
SW6 SW7 SW8 SW9 SW10 SW11 SW12 SW13 SW14
RS R1 90% SR=ΔV/Δt
VEE
VH
C
A
~ ~ RL CL V
~ V ΔV
VIN- VIN+
VOUT 10%
VL
Δt
t
Output wave
Fig.91 Test Circuit 2 (each Op-Amp)
Fig. 92 Slew Rate Input Waveform
VCC VCC
OTHER
R1//R2 R1//R2 CH
VEE VEE
R1 R2 R1 R2
VIN V VOUT1 V VOUT2
=0.5[Vrms]
100×VOUT1
CS=20×log
VOUT2
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 35/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
●Power Dissipation
Power dissipation(total loss) indicates the power that can be consumed by IC at Ta=25℃(normal temperature). IC is heated
when it consumed power, and the temperature of IC chip becomes higher than ambient temperature. The temperature that
can be accepted by IC chip depends on circuit configuration, manufacturing process, and consumable power is limited.
Power dissipation is determined by the temperature allowed in IC chip(maximum junction temperature) and thermal
resistance of package(heat dissipation capability). The maximum junction temperature is typically equal to the maximum
value in the storage temperature range. Heat generated by consumed power of IC radiates from the mold resin or lead
frame of the package. The parameter which indicates this heat dissipation capability(hardness of heat release)is called
thermal resistance, represented by the symbol θja℃/W. The temperature of IC inside the package can be estimated by this
thermal resistance. Fig.94(a) shows the model of thermal resistance of the package. Thermal resistance θja, ambient
temperature Ta, junction temperature Tj, and power dissipation Pd can be calculated by the equation below:
θja = (Tjmax-Ta) / Pd ℃/W ・・・・・ (Ⅰ)
Derating curve in Fig.94 (b) indicates power that can be consumed by IC with reference to ambient temperature. Power that
can be consumed by IC with reference to ambient temperature. Power that can be consumed by IC begins to attenuate at
certain ambient temperature. This gradient is determined by thermal resistance θja. Thermal resistance θja depends on
chip size, power consumption, package, ambient temperature, package condition, wind velocity, etc even when the same of
package is used. Thermal reduction curve indicates a reference value measured at a specified condition. Fig.95(c), to , (e)
show a derating curve for an example of BA4560, BA4560R, BA4564R, BA4564W.
PowerLSIの
dissipation of LSI [W]
消 費 電 力 [W]
Pd (max)
θja=(Tjmax-Ta)/Pd ℃/W
P2 θja2 < θja1
周囲温度
Ambient Ta [℃] Ta [℃]
temperature
θ' ja2
P1 θ ja2
*
BA4560F( 16)
POWER DISSIPATION [mW] .
*
*
BA4564RFV/WFV( 20)
POWER DISSIPATION [mW]
* BA4560FJ( 17)
BA4560F( 16)
*
BA4560FV/FVT( 18)
600 *
600 600
BA4560FJ( 17) *
* BA4560FVM( 19)
BA4560FV/FVT( 18)
*
BA4560FVM( 19)
400 400 400
0 0
0
0 25 50 75 100 125 0 25 50 75 100 125
0 25 50 75 100 125 AMBIENT TEMPERATURE [℃]
AMBIENT TEMPERTURE [℃] . AMBIEN T TEMPERT URE [℃ ] .
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 36/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
Examples of circuit
○Voltage follower
VEE
Fig. 96 Voltage follower circuit
○Inverting amplifier
R2
For inverting amplifier, Vi(b) Derating curve voltage
gain decided R1 and R2, and phase reversed voltage
VCC is outputted.
Vout is shown next formula.
Vout=-(R2/R1)・Vin
R1
Vin Input impedance is R1.
Vout
R1//R2 VEE
○Non-inverting amplifier
R1 R2
For non-inverting amplifier, Vin is amplified by voltage
gain decided R1 and R2, and phase is same with Vin.
VCC Vout is shown next formula.
Vout=(1 + R2/R1)・Vin
This circuit realizes high input impedance because
Input impedance is operational amplifier’s input
Vout Impedance.
Vin
VEE
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 37/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
VCC
●Operational Notes
1) Processing of unused circuit
It is recommended to apply connection (see the Fig.99) and set the non inverting +
input terminal at the potential within input common-mode voltage range (Vicm), Connect
for any unused circuit. to Vicm Vicm
-
9) Radiation
This IC is not designed to be radiation-resistant.
10) IC Handling
When stress is applied to IC because of deflection or bend of board, the characteristics may fluctuate due to piezoelectric
(piezo) effect.
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 38/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
0.9±0.15
E2
0.3MIN
4.4±0.2
6.2±0.3
Direction
The direction is the 1pin of product is at the upper left when you hold
of feed
( reel on the left hand and you pull out the tape on the right hand )
1 2 3 4
0.595
+0.1
0.17 -0.05
1.5±0.1
0.1 S
0.11
1.27
Direction of feed
0.42±0.1 1pin
(Unit : mm) Reel ∗ Order quantity needs to be multiple of the minimum quantity.
SSOP-B8
3.0±0.2 <Tape and Reel information>
(MAX 3.35 include BURR)
8 7 6 5 Tape Embossed carrier tape
Quantity 2500pcs
E2
Direction
The direction is the 1pin of product is at the upper left when you hold
( reel on the left hand and you pull out the tape on the right hand )
6.4 ± 0.3
4.4 ± 0.2
of feed
0.3MIN
1 2 3 4
1.15±0.1
0.15±0.1
S
0.1 S
Direction of feed
0.1
(0.52) +0.06
0.65 0.22 −0.04
0.08 M
1pin
(Unit : mm) Reel ∗ Order quantity needs to be multiple of the minimum quantity.
SOP-J8
<Tape and Reel information>
4.9±0.2
(MAX 5.25 include BURR) Tape Embossed carrier tape
+6°
4° −4°
8 7 6 5
Quantity 2500pcs
0.45MIN
E2
6.0±0.3
3.9±0.2
Direction
The direction is the 1pin of product is at the upper left when you hold
of feed
( reel on the left hand and you pull out the tape on the right hand )
1 2 3 4
0.545
0.2±0.1
S
1.375±0.1
1.27
0.175
0.42±0.1
0.1 S
Direction of feed
1pin
(Unit : mm) Reel ∗ Order quantity needs to be multiple of the minimum quantity.
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 39/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
MSOP8
<Tape and Reel information>
2.9±0.1
(MAX 3.25 include BURR) Tape Embossed carrier tape
+6°
4° −4° Quantity 3000pcs
0.6±0.2
0.29±0.15
8 7 6 5
TR
2.8±0.1
4.0±0.2
Direction
The direction is the 1pin of product is at the upper right when you hold
of feed ( reel on the left hand and you pull out the tape on the right hand )
1 2 3 4
+0.05
0.22 −0.04
0.75±0.05
0.08±0.05
0.08 S
0.65 Direction of feed
(Unit : mm) Reel ∗ Order quantity needs to be multiple of the minimum quantity.
TSSOP-B8
<Tape and Reel information>
3.0 ± 0.1
(MAX 3.35 include BURR)
4±4 Tape Embossed carrier tape
8 7 6 5
Quantity 3000pcs
E2
Direction
6.4±0.2
4.4±0.1
The direction is the 1pin of product is at the upper left when you hold
of feed ( reel on the left hand and you pull out the tape on the right hand )
0.5±0.15
1.0±0.2
1 2 3 4
1PIN MARK +0.05
0.525 0.145 −0.03
1.0±0.05
1.2MAX
S
0.1±0.05
0.08 S
+0.05
0.245 −0.04 0.08 M Direction of feed
0.65 1pin
(Unit : mm) Reel ∗ Order quantity needs to be multiple of the minimum quantity.
SSOP-B14
<Tape and Reel information>
5.0 ± 0.2
Tape Embossed carrier tape
14 8
Quantity 2500pcs
E2
6.4 ± 0.3
4.4 ± 0.2
Direction
0.3Min.
The direction is the 1pin of product is at the upper left when you hold
of feed ( reel on the left hand and you pull out the tape on the right hand )
1 7
0.15 ± 0.1
1.15 ± 0.1
0.1
0.10
0.65
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 40/41 7.SEP.2012 Rev.002
TSZ22111・15・00
BA4560xxx, BA4560Rxxx, BA4564RFV, BA4564WFV Datasheet
●Marking Diagrams
LOT Number
LOT Number
1PIN MARK
1PIN MARK
LOT Number
LOT Number
1PIN MARK
1PIN MARK
LOT Number
LOT Number
1PIN MARK
1PIN MARK
F SOP8
FJ SOP-J8
FV SSOP-B8
BA4560 4560
FVT TSSOP-B8
FVM MSOP8
FJ SOP-J8
F SOP8
FJ SOP-J8
FV SSOP-B8
BA4560R 4560R
FVT TSSOP-B8
FVM MSOP8
FJ SOP-J8
BA4564R FV SSOP-B14 4564R
BA4564W FV SSOP-B14 4564W
www.rohm.com TSZ02201-0RAR1G200020-1-2
© 2012 ROHM Co., Ltd. All rights reserved. 41/41 7.SEP.2012 Rev.002
TSZ22111・15・00
Datasheet
Notice
●General Precaution
1) Before you use our Products, you are requested to carefully read this document and fully understand its contents.
ROHM shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of any
ROHM’s Products against warning, caution or note contained in this document.
2) All information contained in this document is current as of the issuing date and subject to change without any prior
notice. Before purchasing or using ROHM’s Products, please confirm the latest information with a ROHM sales
representative.
2) ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor
products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate
safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which
a failure or malfunction of our Products may cause. The following are examples of safety measures:
[a] Installation of protection circuits or other protective devices to improve system safety
[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure
3) Our Products are designed and manufactured for use under standard conditions and not under any special or
extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way
responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any
special or extraordinary environments or conditions. If you intend to use our Products under any special or
extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of
product performance, reliability, etc, prior to use, must be necessary:
[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents
[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust
[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,
H2S, NH3, SO2, and NO2
[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves
[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items
[f] Sealing or coating our Products with resin or other coating materials
[g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of
flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning
residue after soldering
[h] Use of the Products in places subject to dew condensation
5) Please verify and confirm characteristics of the final or mounted products in using the Products.
6) In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse) is applied,
confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power
exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect
product performance and reliability.
7) De-rate Power Dissipation (Pd) depending on Ambient temperature (Ta). When used in sealed area, confirm the actual
ambient temperature.
8) Confirm that operation temperature is within the specified range described in the product specification.
9) ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in
this document.
Notice - Rev.003
© 2012 ROHM Co., Ltd. All rights reserved.
Datasheet
2) In principle, the reflow soldering method must be used; if flow soldering method is preferred, please consult with the
ROHM representative in advance.
2) You agree that application notes, reference designs, and associated data and information contained in this document
are presented only as guidance for Products use. Therefore, in case you use such information, you are solely
responsible for it and you must exercise your own independent verification and judgment in the use of such information
contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses
incurred by you or third parties arising from the use of such information.
2) Even under ROHM recommended storage condition, solderability of products out of recommended storage time period
may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is
exceeding the recommended storage time period.
3) Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads
may occur due to excessive stress applied when dropping of a carton.
4) Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of
which storage time is exceeding the recommended storage time period.
2) No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any
third parties with respect to the information contained in this document.
Notice - Rev.003
© 2012 ROHM Co., Ltd. All rights reserved.
Datasheet
●Other Precaution
1) The information contained in this document is provided on an “as is” basis and ROHM does not warrant that all
information contained in this document is accurate and/or error-free. ROHM shall not be in any way responsible or
liable for any damages, expenses or losses incurred by you or third parties resulting from inaccuracy or errors of or
concerning such information.
2) This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.
3) The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written
consent of ROHM.
4) In no event shall you use in any way whatsoever the Products and the related technical information contained in the
Products or this document for any military purposes, including but not limited to, the development of mass-destruction
weapons.
5) The proper names of companies or products described in this document are trademarks or registered trademarks of
ROHM, its affiliated companies or third parties.
Notice - Rev.003
© 2012 ROHM Co., Ltd. All rights reserved.