Section 05500 2.4 Fasteners Proposed Item: 2.4.1 1. HST3-R General: Provide Type 316 Galvanized-Iron fasteners for exterior use and zinc-plated Comply fasteners with coating complying with ASTM B 633, Class Fe/Zn 5, where built into exterior walls. Select fasteners for type, grade, and class required. Section 05500 2.4.9 Proposed Item: Expansion Anchors: Anchor bolt and sleeve assembly of material indicated below with 1. HST3-R capability to sustain, without failure, a load equal to six times the load imposed when installed in unit masonry and equal to four times the load imposed when installed in concrete, as Comply determined by testing per ASTM E 488, conducted by a qualified independent testing agency. a. Interior Material: Carbon-steel components zinc-plated to comply with ASTM B 633, Class Fe/Zn 5. b. Exterior Material: Alloy Group 1 or 2 stainless-steel bolts complying with ASTM F 738M and nuts complying with ASTM F 836M. Section 08520 2.2.2 Proposed Item: Fasteners: Provide aluminium, nonmagnetic stainless steel, epoxy adhesive, or other Comply 1. RE500 v4 materials warranted by manufacturer to be non-corrosive and compatible with aluminium window members, trim, hardware, anchors, and other components of window units.