ALUMINIUM SHAPED BY GUTMANN,
GUTMANN
[GUTMANN SYSTEMS Middle East FZCO P.O. 8054563, Dubal, UAE
DATA SHEET
EPDM RUBBER PROFILE
FOR ALUMINIUM ARCHITECTURAL APPLICATION
Material : EPDM RUBBER GASKET
Funetion : Holding of Glass and Aluminium Sash. Excellent sealing against dust,
water and wird, thermal Insulation, shock absorber, good aesthetic
appearance.
General Physical Properties (DIN-7863)
Properties Specifications Test Method
ARTICLE IDIN 53
Hardness (Shore A) 70+5 Big Part?
Tensile Strength (MPa) 7.5 Min [ DIN 53 504
Elongation Break (%) 200 Min. DIN 53 504
ARTICLE 2DIN 63
Hardness Change -5to +10 519, Part-2
Tensile Change (%) -25 Max. DIN 53 504
Elongation Change (%) ~50 Max. DIN 83 504
Compression Set - 22 Hours at 70 °C. 35 (%) Max. DIN 53 517, Part-1
Ozone Resistance 20% Stretch 40° C 50 q
PHM Ge ties No cracks __|pin's3 609, Partt
Maximum working Temperature (°C) 140°
(GUTMANN SYSTEMS Midate East FZCO Tang cope 08 on gamaneaeALUMINIUM SHAPED BY GUTMANN,
GUTMANN
‘GUTMANN SYSTEMS Middle East F2C0 PO. Bor54£63,Oubal, UAE
DATA SHEET
SILICONE RUBBER PROFILE
FOR ALUMINIUM ARCHITECTURAL APPLICATION
Material 1 Elastomer SILICONE Synthetic Rubber
Function Holding of Gless and Aluminium Sash. Excellent sealing against dust,
water and winds, thermal Insulation, shock absorber, good aesthetic
appearance. Silicone Rubber Vulcanizates process excellent working
properties at high and low temperature,
General Physical Properties
(ASTM C 1115 Table 2, Type C)
Properties Specifications | Test Method
Hardness (Shore A) 70#5 ASTM D 2240
Tensile Strength (MPa) 5.0 Min, ‘ASTM D 412
Elongation Break (%) 125 ASTM D 412
Compression Set - 22 Hours at nnareaee ——
100° C a =|
‘Ozone Resistance 20% S:etch ASTM D 1149
40° C 100 PPM 96 Hrs. No, cracks: (Specimen A)
Maximum Service Temperature Air
480°c, Minimum Service No cracks
Temperature Air -40°c.
GUTMANN SYSTEMS MideleEastF2CO Dudu atpon eae sng ee 8 womens